# K20 powered EG vs EVO running 22psi **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [November 5, 2004, 1:03am UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189 "2004-11-05T01:03:36Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [November 5, 2004, 12:04pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/21 "2004-11-05T12:04:48Z")
> [@BoostedITR41](#): > > what planet are you from…as you can see from the vid there isn’t an exhaust on the hatch for one reason, they don’t make any which means you have to make it. next issue is mounts, tranny, wiring…there is a lot more than 2 days into a swap of that magnitude if you are that fucking stupid to not go out and get a bent up 2.5" exhaust from a custom shop, you shouldn’t own a vehicle. …and since you can buy mounts and a harness, i’d be imbarrassed to tell people it took me longer than a day …sorry, k20 swaps get me fired up… :blah: :finger: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 5, 2004, 12:15pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/22 "2004-11-05T12:15:01Z")
> [@gearhead](#): > > if you are that fucking stupid to not go out and get a bent up 2.5" exhaust from a custom shop, you shouldn’t own a vehicle. > > …and since you can buy mounts and a harness, i’d be imbarrassed to tell people it took me longer than a day > > …sorry, k20 swaps get me fired up… :blah: :finger: when was the last one you did? I have talked to people who have done them…infact even hasport says they are a total pain in the dick…read more talk less ---
**Author:** ![Converted2LSX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/converted2lsx/32/5962_2.png) [@Converted2LSX](https://forums.speedlife.net/u/Converted2LSX)\ **Post date:** [November 5, 2004, 12:47pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/23 "2004-11-05T12:47:36Z")
mabye Im just old school but b series \> k-series ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 1:12pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/24 "2004-11-05T13:12:53Z")
> [@BoostedITR41](#): > > there isn’t an exhaust on the hatch for one reason, they don’t make any which means you have to make it. > [@gearhead](#): > > if you are that fucking stupid to not go out and get a bent up 2.5" exhaust from a custom shop, you shouldn’t own a vehicle. ty… > [@BoostedITR41](#): > > next issue is mounts, tranny, wiring…there is a lot more than 2 days into a swap of that magnitude > [@qknes](#): > > 2 days? **K20 maybe more due to wiring issues.** Forgot it was so hard to run linkage. That and I guess you can read either > [@BoostedITR41](#): > > when was the last one you did? I have talked to people who have done them…infact even hasport says they are a total pain in the dick…read more talk less Hasport the ones that make the mounts **AND WIRING HARNESS!** for the car. The only thing hard for this swap is the wiring. :eek2: :owned: **HONDAS ARE FUCKING LEGOS SON!** _ps. I call you son because your so bright… pshh_ ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 1:35pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/25 "2004-11-05T13:35:22Z")
> [@qknes](#): > > ty… > > Forgot it was so hard to run linkage. That and I guess you can read either > > Hasport the ones that make the mounts **AND WIRING HARNESS!** for the car. The only thing hard for this swap is the wiring. > > :eek2: :owned: **HONDAS ARE FUCKING LEGOS SON** ---
**Author:** ![jcxcr4000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jcxcr4000/32/5980_2.png) [@jcxcr4000](https://forums.speedlife.net/u/jcxcr4000)\ **Post date:** [November 5, 2004, 2:49pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/26 "2004-11-05T14:49:12Z")
> [@qknes](#): > > ty… > Hasport the ones that make the mounts **AND WIRING HARNESS!** for the car. The only thing hard for this swap is the wiring. last time i check hasport didnt make a mount kit for egs yet however they do make a full mount and wiring kit of eks and newer so it would take a little more then 2 days to do a eg but a ek i can see 2 days so maybe you need to keep your owned sign out of your posts 😃 :owned: o and incase you dont believe me here is a link to there site http://www.hasport.com/Products/Mounts.htm ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 2:51pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/27 "2004-11-05T14:51:10Z")
sorry i meant ek ^x that statement they make mounts hold up… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 5, 2004, 3:14pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/28 "2004-11-05T15:14:06Z")
dude hasport said in a article about their car that it is a pain but worth it…read read read…I understand most things aren’t in ebonics but you can struggle through ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 3:17pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/29 "2004-11-05T15:17:20Z")
> [@jcxcr4000](#): > > last time i check hasport didnt make a mount kit for egs yet however they do make a full mount and wiring kit of eks and newer > > so it would take a little more then 2 days to do a eg but a ek i can see 2 days > > so maybe you need to keep your owned sign out of your posts 😃 :owned: > > o and incase you dont believe me here is a link to there site http://www.hasport.com/Products/Mounts.htm WHOA EAT ME! [http://www.nolimitmotorsport.com/prod/EGK1](http://www.nolimitmotorsport.com/prod/EGK1) :owned: > [@BoostedITR41](#): > > dude hasport said in a article about their car that it is a pain but worth it…read read read…I understand most things aren’t in ebonics but you can struggle through Hondatuning. Did this in there magazine and said the hardest part was running the wires behind the dash. ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 3:27pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/30 "2004-11-05T15:27:39Z")
I feel sorry for you people due to I own a ford… And I know this shit ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [November 5, 2004, 5:11pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/31 "2004-11-05T17:11:28Z")
> [@qknes](#): > > eg, LS Swap, t3/t4 22 psi, Stock internals > high 11’s low 12’s > and you still havent spent half the price for a evo 22psi on stock internals eh? high 11’s? :kekegay: you make it sound like its bolting on an exhaust. Go ask Eric or Sam or even George how easy it is to get a FWD 4cyl into the high 11’s. ---
**Author:** ![EclipseRST](https://avatars.discourse-cdn.com/v4/letter/e/49beb7/32.png) [@EclipseRST](https://forums.speedlife.net/u/EclipseRST)\ **Post date:** [November 5, 2004, 7:12pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/32 "2004-11-05T19:12:38Z")
22lbs on the EVO… ![http://mech.phpwebhosting.com/~whoop/gallery/albums/9s-stuff/Calling_bullshit.highlight.jpg](http://mech.phpwebhosting.com/~whoop/gallery/albums/9s-stuff/Calling_bullshit.highlight.jpg) Looks a little slow for 22lbs… ---
**Author:** ![grandamld9](https://avatars.discourse-cdn.com/v4/letter/g/48db29/32.png) [@grandamld9](https://forums.speedlife.net/u/grandamld9)\ **Post date:** [November 5, 2004, 7:24pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/33 "2004-11-05T19:24:17Z")
> **[Hybrid Racing - Performance Automotive parts for Honda and Acura](https://www.hybrid-racing.com/)** > > Hybrid Racing designs and manufactures performance automotive parts for Hondas and Acuras. [http://www.hybrid-racing.com/fabrication.html](http://www.hybrid-racing.com/fabrication.html) They sell mounts for the swap. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 5, 2004, 7:31pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/34 "2004-11-05T19:31:15Z")
> [@Darkstar](#): > > 22psi on stock internals eh? high 11’s? :kekegay: > > you make it sound like its bolting on an exhaust. Go ask Eric or Sam or even George how easy it is to get a FWD 4cyl into the high 11’s. 22psi on inline pro head gasket has been done and pushed cars way faster than 11’s but it isn’t easy… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 5, 2004, 7:32pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/35 "2004-11-05T19:32:06Z")
> [@EclipseRST](#): > > 22lbs on the EVO… > ![http://mech.phpwebhosting.com/~whoop/gallery/albums/9s-stuff/Calling_bullshit.highlight.jpg](http://mech.phpwebhosting.com/~whoop/gallery/albums/9s-stuff/Calling_bullshit.highlight.jpg) > > Looks a little slow for 22lbs… Please understand that is a RSX-R swap with 220hp factory in a 2200-2000lb car with open exhaust and it was roll ---
**Author:** ![fattyvr6](https://avatars.discourse-cdn.com/v4/letter/f/977dab/32.png) [@fattyvr6](https://forums.speedlife.net/u/fattyvr6)\ **Post date:** [November 5, 2004, 7:55pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/36 "2004-11-05T19:55:06Z")
SCC detailed a K20 turbo swap into an EK chassis…that was insane…but i didnt think you could get one into an EG… ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [November 5, 2004, 8:07pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/37 "2004-11-05T20:07:05Z")
> [@BoostedITR41](#): > > 22psi on inline pro head gasket has been done and pushed cars way faster than 11’s but it isn’t easy… a bone stock LS motor with nothing more than a head gasket? (well, I guess if you drop it in a 1800lb car maybe) ---
**Author:** ![Stroker](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stroker/32/5948_2.png) [@Stroker](https://forums.speedlife.net/u/Stroker)\ **Post date:** [November 5, 2004, 8:28pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/38 "2004-11-05T20:28:18Z")
> [@Darkstar](#): > > 22psi on stock internals eh? high 11’s? :kekegay: > > you make it sound like its bolting on an exhaust. Go ask Eric or Sam or even George how easy it is to get a FWD 4cyl into the high 11’s. i was gonna say the same thing 22psi on stock internals noo way mabey for a couple sec ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 5, 2004, 9:08pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/39 "2004-11-05T21:08:59Z")
> [@Darkstar](#): > > a bone stock LS motor with nothing more than a head gasket? > > (well, I guess if you drop it in a 1800lb car maybe) actually ls can handle that without the head gasket. I am sure you have seen cheezefrogs vids that was a bone stock LS for a long time that did mid 11’s on 20psi tuned…all the inline pro cars have gone high 10’s low 11’s on stock blocks…infact Brian fishers 9 second civic is a GSR motor with only stock bore 9:1 compression pistons. stock rods, crank, head, cams etc. go to honda-tech and read there are a lot of stock block cars ripping off 10’s edit: Karl Hedgpath did 505whp on his stock GSR block with Inline pro head gasket and went 10.9 4 years ago ---
**Author:** ![starboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/starboy/32/5985_2.png) [@starboy](https://forums.speedlife.net/u/starboy)\ **Post date:** [November 5, 2004, 10:25pm UTC](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189/40 "2004-11-05T22:25:12Z")
> [@Darkstar](#): > > 22psi on stock internals eh? high 11’s? :kekegay: > > you make it sound like its bolting on an exhaust. Go ask Eric or Sam or even George how easy it is to get a FWD 4cyl into the high 11’s. Ive heard of Eric and totatally respect his car. Ive personally seen with my own eyes 2 stock ls swaps with turbos 18-22 psi run low 12’s high 11’s on stock internals. Yes they did blow after awhile but it was a good couple months. [Previous page](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189.md?page=1) [Next page](https://forums.speedlife.net/t/k20-powered-eg-vs-evo-running-22psi/170189.md?page=3)