# KA AUTO --\> MANUAL **URL:** \ **Category:** SON240sx Automotive\ **Created:** [April 23, 2004, 9:04am UTC](https://forums.speedlife.net/t/ka-auto-manual/80896 "2004-04-23T09:04:58Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![darkcore](https://avatars.discourse-cdn.com/v4/letter/d/c5a1d2/32.png) [@darkcore](https://forums.speedlife.net/u/darkcore)\ **Post date:** [April 23, 2004, 9:04am UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/1 "2004-04-23T09:04:58Z")
36 hours and its finally complete, KA auto \> manual… 😃 what we did was terrorize the steering column and stick the break and clutch in. than we went on to disassemble the manual tranny under the car without taking the engine out.(which would have been much easier, working under the car is a bit\*\*) finally, after taking the exhaust off we could fit the manual tranny onto the engine. after test driving it was great to finally see the accomplishment that many individuals discourage auto 240sx owners to do. ---
**Author:** ![Pavel](https://avatars.discourse-cdn.com/v4/letter/p/a4c791/32.png) [@Pavel](https://forums.speedlife.net/u/Pavel)\ **Post date:** [April 23, 2004, 9:39am UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/2 "2004-04-23T09:39:51Z")
good job ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [April 23, 2004, 7:23pm UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/3 "2004-04-23T19:23:07Z")
I’m considering the swap. Was it hard to mount the master cylinder/clutch pedal? I don’t have any pre-drilled holes in my firewall but there is a couple of markers. Were they’re any sensors to mount on the clutch pedal? If there were, was there any difficulty there? Did you change the pilot bearing when doing the flywheel? ---
**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\ **Post date:** [April 23, 2004, 7:31pm UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/4 "2004-04-23T19:31:41Z")
There is a stamped placement to drill the holes in the firewall for the Clutch. There is no wiring required for the Master Cylinder. Dark Core I hope you Installed a Piolet Bearing into the Engine. If not good luck driving that thing for more than 3,000km :shock: Automatic Engines don’t have them. They have a Piolet Sleave. ---
**Author:** ![darkcore](https://avatars.discourse-cdn.com/v4/letter/d/c5a1d2/32.png) [@darkcore](https://forums.speedlife.net/u/darkcore)\ **Post date:** [April 24, 2004, 12:43am UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/5 "2004-04-24T00:43:00Z")
it wasnt just me working there… john did most of the work because i was still in learning mode. ---
**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\ **Post date:** [April 24, 2004, 8:41am UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/6 "2004-04-24T08:41:09Z")
Well go ask him if he installed the bearing or not. Most mechanics/people don’t know they need to do this. ---
**Author:** ![darkcore](https://avatars.discourse-cdn.com/v4/letter/d/c5a1d2/32.png) [@darkcore](https://forums.speedlife.net/u/darkcore)\ **Post date:** [April 24, 2004, 2:05pm UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/7 "2004-04-24T14:05:32Z")
as you wish, boss ---
**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\ **Post date:** [April 24, 2004, 5:21pm UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/8 "2004-04-24T17:21:32Z")
:thumleft: ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [April 25, 2004, 8:19pm UTC](https://forums.speedlife.net/t/ka-auto-manual/80896/9 "2004-04-25T20:19:51Z")
Delete post plz.