# KA Rad hoses

**URL:** https://forums.speedlife.net/t/ka-rad-hoses/87533
**Category:** SON240sx Automotive
**Created:** [July 29, 2005, 6:28am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533 "2005-07-29T06:28:52Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)
#### Post date: [July 29, 2005, 6:28am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/1 "2005-07-29T06:28:52Z")

</div>

Quick question. Are the upper and lower rad hoses from the KA24E and the KA24DE the same?

---

<div class="post-metadata">

### Author: ![brocoli](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brocoli/32/5518_2.png) [@brocoli](https://forums.speedlife.net/u/brocoli)
#### Post date: [July 29, 2005, 6:35am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/2 "2005-07-29T06:35:57Z")

</div>

rad hoses are just rubber hoses no? if your asking where the get attached to the rad…i would thinkj that would be the smae also

---

<div class="post-metadata">

### Author: ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)
#### Post date: [July 29, 2005, 6:47am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/3 "2005-07-29T06:47:53Z")

</div>

I’m asking because on the Nico Club CA forum, it says to use KA24DE upper and lower rad hoses. I have a KA24E and I want to know if those rad hoses will work.

---

<div class="post-metadata">

### Author: ![brocoli](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brocoli/32/5518_2.png) [@brocoli](https://forums.speedlife.net/u/brocoli)
#### Post date: [July 29, 2005, 7:09am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/4 "2005-07-29T07:09:51Z")

</div>

ramesh, go take a look at them if you can bend them (which you should be) then you’ll be fine if it doesnt go to lansing and buy some hose and cut it to size lol

---

<div class="post-metadata">

### Author: ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)
#### Post date: [July 29, 2005, 8:54am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/5 "2005-07-29T08:54:51Z")

</div>

Looking at engine bay shots, it’s looks as though they are not. I could be wrong.

---

<div class="post-metadata">

### Author: ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)
#### Post date: [July 29, 2005, 9:27am UTC](https://forums.speedlife.net/t/ka-rad-hoses/87533/6 "2005-07-29T09:27:00Z")

</div>

they are the same