# KOUKI front end

**URL:** <https://forums.speedlife.net/t/kouki-front-end/131010>\
**Category:** SON240sx Automotive\
**Created:** [January 22, 2010, 12:04pm UTC](https://forums.speedlife.net/t/kouki-front-end/131010 "2010-01-22T12:04:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![timmy\_sivad](https://avatars.discourse-cdn.com/v4/letter/t/f08c70/32.png) [@timmy\_sivad](https://forums.speedlife.net/u/timmy_sivad)\
**Post date:** [January 22, 2010, 12:04pm UTC](https://forums.speedlife.net/t/kouki-front-end/131010/1 "2010-01-22T12:04:26Z")

</div>

so i’m currently in the process of doing an s13.4 swap on my 180sx. i have the hardest part covered (the fenders). unfortuneatly i don’t have access to a s14 kouki, or any s14 foro that matter.

so basically i need some help. i’m wondering if any of you s14 owners out there could do me a favor and look at what your headlight assembly mounts to. i found this interesting schematic on the web and i’m wondering also if anyone can tell me what teh part labled #3 is? i’m wondering if it holds the light s at all

cheers, and any help is greatly appreciated

TIM

![http://www.partswebsite.com//stores/partsimages/parts3/3795015.gif](http://www.partswebsite.com//stores/partsimages/parts3/3795015.gif)

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [January 22, 2010, 12:12pm UTC](https://forums.speedlife.net/t/kouki-front-end/131010/2 "2010-01-22T12:12:10Z")

</div>

#3 attaches to the fenders under the corner lenses, and attaches to the rebar across the top, and headlight brackets, then the bumper skin attaches to that…

#8 I had to remove in favour of JDM parts to allow me to fit a FMIC

the headlights attach to the fenders and to the headlight brackets which are bolted to the lower rad saddle and spot welded to the upper rad saddle. A zenki rad saddle and headlight brackets work however 1 of 2 holes line up and a plastic headlight tab will need trimming

---

<div class="post-metadata">

**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\
**Post date:** [January 22, 2010, 12:22pm UTC](https://forums.speedlife.net/t/kouki-front-end/131010/3 "2010-01-22T12:22:47Z")

</div>

[http://www.courtesyparts.com/240sx-parts-s14-1995-1998/genuine-nissan-parts/-c-3690\_3691.html](http://www.courtesyparts.com/240sx-parts-s14-1995-1998/genuine-nissan-parts/-c-3690_3691.html)

poke around on here theres alot of good diagrams that should help you out