# KrazyKid's race car hauler.

**URL:** https://forums.speedlife.net/t/krazykids-race-car-hauler/253336
**Category:** Builds
**Created:** [July 19, 2010, 7:16am UTC](https://forums.speedlife.net/t/krazykids-race-car-hauler/253336 "2010-07-19T07:16:16Z")
**Posts on this page:** 1
**Showing post:** 19

<div class="post-metadata">

### Author: ![Boxersix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxersix/32/6327_2.png) [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 12, 2010, 1:25pm UTC](https://forums.speedlife.net/t/krazykids-race-car-hauler/253336/19 "2010-09-12T13:25:51Z")

</div>

> [@MJOLNIR! Is the name.](https://forums.speedlife.net/t/mjolnir-is-the-name/34772/6):
>
> Yeah they are kinda tall, but thats mostly becasue the bed is low and the tires are big so there wasnt really any way around it I guess. Fenders arnt removable. they are welded in and acutally have heavy supports for them to tie in the side rails. It is what it is, if you have to dukes of hazard out of the car so be it. lol
> 
> The ramps will attach to heavy lips on the back bumper. **I am going to bend up some 1/2" thick X 1" flat stock into a U shape and weld it on the back one on each side**. then the ramps will just have a L shaped lip on the end to drop onto and sit on the U shaped guys on the bumper. then make a little rail under neath the trailer on the side to slide the ramps in and pin them for storage. The other idea was to just cut a 1" slot out of the expanded metal on the back where it mounts to the bumper, but it would weaken it a little and not look as clean. 1/2" X 1" U’s I think are plenty strong thats for sure.

Common way to do it 🙂

Just buy some steel channel. They make it in that size. I probably have some here if you’d need a couple small lengths.

If you plan to have a wedge base on the end of the ramp that contacts the ground(to make a low of a drive on edge as possible) consider pinning the ramps to the deck. Pending truck hitch height and/or loading angle of the whole truck + trailer you can sometime end up with ramps that pop up off the lip when loading/unloading.

This happens to Jason Micares’ two car, because the ramp base angle is not meant for the trailer deck height. Ask him what he almost did to the JP car one track day :lol

If you just square off the ends of the ramps and use wood or similar to lessen then approach edge, then you won’t have this problem, but will just have to keep some shim boards in the truck.

Shit paint sketch: Jay’s ramps on two car are on top, single car ramp style on bottom. can see the issue with top ones on pavement if not pinned.

 ![http://i123.photobucket.com/albums/o285/Boxxersix/ramp.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/0/9/090895ffad1467aeda69e8342bd04b1b5964b20c.jpeg)

---

_[View the full topic](https://forums.speedlife.net/t/krazykids-race-car-hauler/253336)._