# LarrySHOT's 94 turbo integra **URL:** \ **Category:** Builds\ **Created:** [August 3, 2009, 4:06pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367 "2009-08-03T16:06:42Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [August 3, 2009, 4:06pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/1 "2009-08-03T16:06:42Z")
like it says i got another project got all my parts putthing them on this weekend 1994 LS Integra walbro 255 fuel pump t3t4 ar .50 57 trim turbo 30x12x2.5 fmic 2.5 inch ic pipes precision 440 injectors turbo xs rfl bov 3 in down pipe 3 in exhaust cut ou in front of pass rear tire xtd stage 3 6 puck clutch civic half rad tubular turbo mani turbo xs 38mm 6 psi wastegate lowered in tein springs 17 in rims type R lip type R rear spoiler ![http://www.pittspeed.com/uploaded/zxfcbgsdfg.jpg](http://www.pittspeed.com/uploaded/zxfcbgsdfg.jpg) ![http://www.pittspeed.com/uploaded/sadgfagf.jpg](http://www.pittspeed.com/uploaded/sadgfagf.jpg) ![http://www.pittspeed.com/uploaded/sdfgsd.jpg](http://www.pittspeed.com/uploaded/sdfgsd.jpg) ![http://www.pittspeed.com/uploaded/szdfsdf.jpg](http://www.pittspeed.com/uploaded/szdfsdf.jpg) ![[http://www.pittspeed.com/uploaded/szdfsdf](http://www.pittspeed.com/uploaded/szdfsdf) (2).jpg]([http://www.pittspeed.com/uploaded/szdfsdf](http://www.pittspeed.com/uploaded/szdfsdf) (2).jpg) ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [August 9, 2009, 8:43am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/2 "2009-08-09T08:43:25Z")
![[http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 013.jpg]([http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 013.jpg) ![[http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 017.jpg]([http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 017.jpg) ![[http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 015.jpg]([http://www.pittspeed.com/uploaded/boost](http://www.pittspeed.com/uploaded/boost) 015.jpg) ---
**Author:** ![matt94z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt94z/32/6040_2.png) [@matt94z](https://forums.speedlife.net/u/matt94z)\ **Post date:** [August 9, 2009, 9:01am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/3 "2009-08-09T09:01:14Z")
eBay!!! You might want to make a bracket that bolts the turbo to the block, otherwise you might end up running it over when it breaks off. ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [August 9, 2009, 9:38am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/4 "2009-08-09T09:38:42Z")
one on my dsm never broke so oh well if your gonna talk shit cause its all i can afford right now then dont post in my thread dickhead ---
**Author:** ![green](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/green/32/5996_2.png) [@green](https://forums.speedlife.net/u/green)\ **Post date:** [August 9, 2009, 11:18am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/5 "2009-08-09T11:18:26Z")
Im going to have to agree with him on making a bracket. Black Integra had this problem I think 3 times now. Make the bracket its cheap insurance. ---
**Author:** ![ZEX350Z](https://avatars.discourse-cdn.com/v4/letter/z/87869e/32.png) [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)\ **Post date:** [August 10, 2009, 6:45am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/6 "2009-08-10T06:45:42Z")
Even nice tubular manifolds should have proper reinforcement. It WILL break if you don’t make additional brackets. Not hating - just speaking the truth from experience. It will rip regardless. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [August 10, 2009, 7:17am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/7 "2009-08-10T07:17:21Z")
it will break not sure how many times i have welded them up. i would buy a second one and keep it around so you can just swap them out and have one repaired will be a fun car. but is this your only car? ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [August 10, 2009, 8:24am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/8 "2009-08-10T08:24:17Z")
I just had a guy bring me the same manifold, the gate broke completely off the manifold collector, he wanted me to weld it, i told him to buy a real manifold… if you cant afford good parts, dont buy crappy ones and then get angry bc people try and give you advice… make a brace… use a turbo mount flange bolt and run the brace down to the factory exhaust manifold brace boss in the block, just above the oil pan. ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [August 10, 2009, 8:56am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/9 "2009-08-10T08:56:34Z")
> [@FS: Powder Coating Powder and Gun](https://forums.speedlife.net/t/fs-powder-coating-powder-and-gun/40791/7): > > one on my dsm never broke so oh well if your gonna talk shit cause its all i can afford right now then dont post in my thread dickhead lol @ idiot that doesn’t know what he’s doing. ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [August 10, 2009, 9:42am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/10 "2009-08-10T09:42:31Z")
I acually had a D series one that never broke. The best way to do it if you want to go cheap is get the cast one off of ebay for $88 dollars shipped. ---
**Author:** ![4\_door\_love](https://avatars.discourse-cdn.com/v4/letter/4/e19b73/32.png) [@4\_door\_love](https://forums.speedlife.net/u/4_door_love)\ **Post date:** [August 10, 2009, 9:50am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/11 "2009-08-10T09:50:35Z")
have you compression tested that car yet… i know the kid who owned it previously ran it low on oil a few times due to ignorance… ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [August 10, 2009, 11:43am UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/12 "2009-08-10T11:43:43Z")
car has been gone over by a friend and im buying another daily driver in like 2 weeks when i get my bonus money back from the army just a cheap beater nothing done to it get in and drive the car runs good no noises no smoke > [@went for a walk....](https://forums.speedlife.net/t/went-for-a-walk/39965/26): > > lol @ idiot that doesn’t know what he’s doing. Coming from the faggot who drives an automatic corvette…your lucky i dont know how to find you cause id beat your fuckin face in…I really cant fuckin stand you…your a pos and need to die ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [September 7, 2009, 2:06pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/13 "2009-09-07T14:06:34Z")
![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 003.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 003.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 009.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 009.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 012.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 012.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 006.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 006.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 013.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 013.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 008.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 008.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 005.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 005.JPG) ![[http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 011.JPG]([http://www.pittspeed.com/uploaded/new](http://www.pittspeed.com/uploaded/new) teg pictures 011.JPG) figured id throw some new pics up ---
**Author:** ![brokeasskorean](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)\ **Post date:** [September 7, 2009, 4:59pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/14 "2009-09-07T16:59:45Z")
what happened with the tubular manifold? did i miss something? ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [September 7, 2009, 6:20pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/15 "2009-09-07T18:20:31Z")
took it off and went with a log manifold…still having some problems gota go over some shit tomorrow got some exhaust leaks to fix and find out why my three bar will not work…does anyone know the diagram on how it gets wired up??? i do not have a volt meeter to do it that way ---
**Author:** ![Zack01GC](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zack01GC](https://forums.speedlife.net/u/Zack01GC)\ **Post date:** [September 7, 2009, 8:20pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/16 "2009-09-07T20:20:58Z")
Step 1: Remove license plate and taillights before rattle bombing car. Is that also overspray on the gauge cluster? ---
**Author:** ![matt94z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt94z/32/6040_2.png) [@matt94z](https://forums.speedlife.net/u/matt94z)\ **Post date:** [September 7, 2009, 8:28pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/17 "2009-09-07T20:28:19Z")
Step 2: Close windows before spray painting car, to keep overspray off of interior. lol ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [September 7, 2009, 9:29pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/18 "2009-09-07T21:29:26Z")
Not over spray on cluster the cluster has somethin on it been like that since I got it ---
**Author:** ![BigMack\_Srt8](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bigmack_srt8/32/6025_2.png) [@BigMack\_Srt8](https://forums.speedlife.net/u/BigMack_Srt8)\ **Post date:** [September 7, 2009, 10:25pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/19 "2009-09-07T22:25:23Z")
did that car use to belong to a zac? ---
**Author:** ![LarrySHOT](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@LarrySHOT](https://forums.speedlife.net/u/LarrySHOT)\ **Post date:** [September 7, 2009, 10:36pm UTC](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367/20 "2009-09-07T22:36:34Z")
Yeah [Next page](https://forums.speedlife.net/t/larryshots-94-turbo-integra/203367.md?page=2)