# Lathe service

**URL:** <https://forums.speedlife.net/t/lathe-service/233251>\
**Category:** Classifieds\
**Created:** [October 10, 2013, 9:27pm UTC](https://forums.speedlife.net/t/lathe-service/233251 "2013-10-10T21:27:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\
**Post date:** [October 10, 2013, 9:27pm UTC](https://forums.speedlife.net/t/lathe-service/233251/1 "2013-10-10T21:27:48Z")

</div>

I need someone to cut a polyurethane spacer in half. I have two of them approximately 6.5’’ diameter 2’’ thick. I need them to be 1’’ thick

text or pm me here, 445-0883

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [October 11, 2013, 2:54pm UTC](https://forums.speedlife.net/t/lathe-service/233251/2 "2013-10-11T14:54:32Z")

</div>

are these rubber-like polyurethane or delrin spacers?

---

<div class="post-metadata">

**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\
**Post date:** [October 11, 2013, 9:14pm UTC](https://forums.speedlife.net/t/lathe-service/233251/3 "2013-10-11T21:14:52Z")

</div>

> [@Spam16v](#):
>
> are these rubber-like polyurethane or delrin spacers?

Rubber polyurethane

---

<div class="post-metadata">

**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\
**Post date:** [October 11, 2013, 9:45pm UTC](https://forums.speedlife.net/t/lathe-service/233251/4 "2013-10-11T21:45:01Z")

</div>

get a razor knife hot with a torch and cut them that way.