# Let's see a laser cut this...

**URL:** <https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304>\
**Category:** Vendor Marketplace\
**Created:** [June 19, 2013, 5:43pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304 "2013-06-19T17:43:29Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [June 20, 2013, 6:04am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/21 "2013-06-20T06:04:04Z")

</div>

Awesome, thanks for posting those!

450lb T Rex. 🙂 It can be yours for just $5000.

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [June 20, 2013, 6:24am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/22 "2013-06-20T06:24:36Z")

</div>

More neat stuff. A solid copper golf trophy with Stainless flag and a plastic DTM license plate.

---

<div class="post-metadata">

**Author:** ![HouseS2K](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/houses2k/32/100273_2.png) [@HouseS2K](https://forums.speedlife.net/u/HouseS2K)\
**Post date:** [June 20, 2013, 8:44am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/23 "2013-06-20T08:44:22Z")

</div>

> [@Blue Eyed Devil"](#):
>
> I haven’t posted an introduction thread yet and I thought this little cut would be a nice introduction. 🙂 Others have been nice enough to give my company good reviews and I appreciate that.
> 
> So this little piece is 6" thick steel. It is just one reason I purchased a water jet rather than a laser. (I have also cut 7" thick aluminum) Like my website says, I can cut any material, any shape, any size, in any quantity.
> 
> Check us out at…  
> [www.worldwidewaterjet.com](http://www.worldwidewaterjet.com)

Sent from my iPhone 5

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [June 20, 2013, 10:51am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/24 "2013-06-20T10:51:41Z")

</div>

What you don’t like my Pulitzer nominated post? 😉

Here is a set of pie jaws we cut from 7" 6061 aluminum…

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [June 20, 2013, 5:22pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/25 "2013-06-20T17:22:51Z")

</div>

How much for the small dino?

---

<div class="post-metadata">

**Author:** ![TradersBASE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tradersbase/32/5321_2.png) [@TradersBASE](https://forums.speedlife.net/u/TradersBASE)\
**Post date:** [June 20, 2013, 8:07pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/26 "2013-06-20T20:07:00Z")

</div>

I want you to teach me how to do this stuff. Then I’ll teach you how to use Outlook. Deal?  
😉 That’s one badass machine cutting through those materials.

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [January 30, 2014, 12:49pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/27 "2014-01-30T12:49:18Z")

</div>

Avoid lugging one piece, heavy, cumbersome, ugly, redneck fire pits that everyone knows you bought from Home Cheapo or Blowes and buy something with some class… I present to you the fully portable Arts & Craft/Frank Lloyd Wright inspired fire pit. $200 while supplies last…

- 
  - 
    - Updated - - -

The inside is approximately 34" square.

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [January 30, 2014, 12:58pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/28 "2014-01-30T12:58:16Z")

</div>

That’s really neat stuff!

How does it actually cut the thick metal? Do you go down a few thousandths the entire shape you are cutting, then start over and do it again another few thousandths, repeating until it’s done?

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [January 30, 2014, 5:51pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/29 "2014-01-30T17:51:20Z")

</div>

Nope. It cuts all the way through and moves along the cutline at the rate required to cut full thickness. It still is neat to watch even after watching hundreds of cuts.

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [January 30, 2014, 6:47pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/30 "2014-01-30T18:47:57Z")

</div>

That’s cool but I have no place for a fire pit at the moment ☹

… Same as I have no place for a giant dinosaur ☹

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [January 30, 2014, 7:10pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/31 "2014-01-30T19:10:47Z")

</div>

would you be able to cut something from a template/tracing?

now that i see this i would consider getting new uprights for my rear wing made that were a bit less tall (2-3" shorter)

would it be enough to work with if i were to make a template of the upright i currently have, provide some suggestions on where to knock off some height and measure the thickness of the aluminum?

ive attached pics for reference to what im talking about if i wasnt clear

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [January 30, 2014, 7:38pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/32 "2014-01-30T19:38:59Z")

</div>

It can be done that way, my only concern would be hole locations because it would only be as accurate as your pen or whatever. If the holes are big enough it would leave a little wiggle room for assembly/mounting. I don’t see why it wouldn’t be possible. You would get the Porschephile discount too. 🙂

---

<div class="post-metadata">

**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\
**Post date:** [January 30, 2014, 7:57pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/33 "2014-01-30T19:57:36Z")

</div>

> [@Blue Eyed Devil](#):
>
> Avoid lugging one piece, heavy, cumbersome, ugly, redneck fire pits that everyone knows you bought from Home Cheapo or Blowes and buy something with some class… I present to you the fully portable Arts & Craft/Frank Lloyd Wright inspired fire pit. $200 while supplies last…
> 
> - 
> - 
> - Updated - - -
> 
> The inside is approximately 34" square.

Frank Lloyd Wright my ass. You stole that design from my window job last year you cheese weasel.

[![http://i1193.photobucket.com/albums/aa354/arrowenterprises/IMAG0972.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/9/5/953a4d722a3fb212c160013f796e3bc2f9ae3a6d.jpeg)](http://s1193.photobucket.com/user/arrowenterprises/media/IMAG0972.jpg.html)

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [January 30, 2014, 7:59pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/34 "2014-01-30T19:59:53Z")

</div>

well the top two that bolt the wing on are simple and allow some wiggle room but the bottom 3 that bolt the uprights to the decklid may be tough to get right i guess. plus they are countersunk so you dont see the hardware when the decklid is closed.

if i get around to it ill see how templates work out…

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [January 30, 2014, 8:03pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/35 "2014-01-30T20:03:53Z")

</div>

> [@XwalkerX](#):
>
> … if i get around to it ill see how templates work out…

#newman

---

<div class="post-metadata">

**Author:** ![Birdman64](https://avatars.discourse-cdn.com/v4/letter/b/c37758/32.png) [@Birdman64](https://forums.speedlife.net/u/Birdman64)\
**Post date:** [January 30, 2014, 8:08pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/36 "2014-01-30T20:08:45Z")

</div>

How many IPM are you cutting at? For something as thin as the fire pit or as thick as the 6"?

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [January 30, 2014, 10:58pm UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/37 "2014-01-30T22:58:37Z")

</div>

> [@Onyx Z32](#):
>
> #newman

que?

---

<div class="post-metadata">

**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\
**Post date:** [January 31, 2014, 4:39am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/38 "2014-01-31T04:39:44Z")

</div>

Walker… why not just send him the current uprights and have him work off of those? You can be without your sweet wing for a week or two 😉

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [January 31, 2014, 6:24am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/39 "2014-01-31T06:24:26Z")

</div>

> [@XwalkerX](#):
>
> que?

Looks like something he could do very easily, and send Mike the file.

---

<div class="post-metadata">

**Author:** ![Blue\_Eyed\_Devil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_eyed_devil/32/7292_2.png) [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)\
**Post date:** [January 31, 2014, 9:02am UTC](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304/40 "2014-01-31T09:02:10Z")

</div>

> [@1QIKZ](#):
>
> Frank Lloyd Wright my ass. You stole that design from my window job last year you cheese weasel.
> 
> [![http://i1193.photobucket.com/albums/aa354/arrowenterprises/IMAG0972.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/9/5/953a4d722a3fb212c160013f796e3bc2f9ae3a6d.jpeg)](http://s1193.photobucket.com/user/arrowenterprises/media/IMAG0972.jpg.html)

I thought you were Frank Lloyd Wright. 🙂

> [@Onyx Z32](#):
>
> #newman

True.

> [@Birdman64](#):
>
> How many IPM are you cutting at? For something as thin as the fire pit or as thick as the 6"?

I don’t know, maybe 12"/minute. 6" AL maybe .5"/minute.

> [@Jeller](#):
>
> Walker… why not just send him the current uprights and have him work off of those? You can be without your sweet wing for a week or two 😉

True.

> [@Onyx Z32](#):
>
> Looks like something he could do very easily, and send Mike the file.

True.

[Previous page](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304.md?page=1)

[Next page](https://forums.speedlife.net/t/lets-see-a-laser-cut-this/231304.md?page=3)
