# LF: Fender Roller
**URL:** https://forums.speedlife.net/t/lf-fender-roller/141421
**Category:** Classifieds
**Created:** [February 8, 2006, 10:55am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421 "2006-02-08T10:55:44Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 10:55am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/1 "2006-02-08T10:55:44Z")
Hey
I am looking for a fender roller to rent/use or buy.
I do not need it right now but perferably before summer.
And no a baseball bad will not work because i need to roll and PULL.
If you have one or know someone or someplace who has one please let me know
Rob
---
### Author:  [@Nis240](https://forums.speedlife.net/u/Nis240)
#### Post date: [February 8, 2006, 11:35am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/2 "2006-02-08T11:35:43Z")
All i have to say is HA!! :lol:
---
### Author:  [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)
#### Post date: [February 8, 2006, 5:21pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/3 "2006-02-08T17:21:04Z")
hey man i rolled and pulled with a baseball bat! u need different sizes of rims!
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 7:19pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/4 "2006-02-08T19:19:10Z")
Umm i am pretty sure i will have to pull more than that.
Matter of fact i need to pull about 1 inch out.
---
### Author:  [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)
#### Post date: [February 8, 2006, 9:09pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/5 "2006-02-08T21:09:55Z")
it can be done with a bat but the roller works much nicer 🙂
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 9:32pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/6 "2006-02-08T21:32:34Z")
Yea pics are here
[http://www.n-e-c-c.com/forum/viewtopic.php?t=529](http://www.n-e-c-c.com/forum/viewtopic.php?t=529)
17x9 +20 Front
17x10 +35 Rear
Tires will be 235 and 255’s
---
### Author:  [@phat240](https://forums.speedlife.net/u/phat240)
#### Post date: [February 8, 2006, 9:38pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/7 "2006-02-08T21:38:10Z")
rob u can run as big of tires as me
---
### Author:  [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)
#### Post date: [February 8, 2006, 9:41pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/8 "2006-02-08T21:41:56Z")
> [@RS13](#):
>
> Yea pics are here
> [http://www.n-e-c-c.com/forum/viewtopic.php?t=529](http://www.n-e-c-c.com/forum/viewtopic.php?t=529)
> 17x9 +20 Front
> 17x10 +35 Rear
>
> Tires will be 235 and 255’s
ahh 17x10 FNO1R u see how much mine is rolled and pulled! u should fit PURRRRFECT with 3/4 of an inch pulled out! thats what that is right there!
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 9:45pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/9 "2006-02-08T21:45:43Z")
> [@phat240](#):
>
> rob u can run as big of tires as me
Yes i can but mine mine will look better. And i can brag that my rims are bigger than yours
---
### Author:  [@phat240](https://forums.speedlife.net/u/phat240)
#### Post date: [February 8, 2006, 9:48pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/10 "2006-02-08T21:48:59Z")
my car will still be faster
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 8, 2006, 9:52pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/11 "2006-02-08T21:52:11Z")
Umm lets see
Stock T25 VS your GT2540R
Stock 370cc VS you 550cc
Do i need to say more???
Ok what was your bud park time???
13.5 @ 104???
Oh wait you broke down So
STOP CLUTTERING MY THREAD :finga:
---
### Author:  [@phat240](https://forums.speedlife.net/u/phat240)
#### Post date: [February 8, 2006, 9:53pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/12 "2006-02-08T21:53:24Z")
jamie smash :axe:
---
### Author:  [@shadowz](https://forums.speedlife.net/u/shadowz)
#### Post date: [February 8, 2006, 10:19pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/13 "2006-02-08T22:19:22Z")
17x10 +35 you might need a spacer, could possibly rub on your damper
---
### Author:  [@imported\_RPS131](https://forums.speedlife.net/u/imported_RPS131)
#### Post date: [February 9, 2006, 12:00am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/14 "2006-02-09T00:00:52Z")
Don’t mean to hijack the thread but will 17 X 10 +18 need rolling and pulling? I’m going to assume yes.
---
### Author:  [@phat240](https://forums.speedlife.net/u/phat240)
#### Post date: [February 9, 2006, 12:06am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/15 "2006-02-09T00:06:38Z")
mostlikely anything 17x10 with what ever offset will need rolling
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 9, 2006, 6:03am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/16 "2006-02-09T06:03:15Z")
I have been told by SPL that the 17x10 +35 will work without a spacer. But i might toss one in there to even it out to the fronts.
17x10 +18 Will definatly need a pull unless you want to run 3.5 degrees of camber and a 215 tire.
---
### Author:  [@shadowz](https://forums.speedlife.net/u/shadowz)
#### Post date: [February 9, 2006, 8:29am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/17 "2006-02-09T08:29:55Z")
My friend had the same width in the rear with a ZEAL Function damper set and he rubbed on the chasis even with quite a lower offset than what you are running at the moment, just a little hint from my past experience
---
### Author:  [@spoonek9](https://forums.speedlife.net/u/spoonek9)
#### Post date: [February 9, 2006, 10:55am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/18 "2006-02-09T10:55:10Z")
> [@RS13](#):
>
> Yea pics are here
> [http://www.n-e-c-c.com/forum/viewtopic.php?t=529](http://www.n-e-c-c.com/forum/viewtopic.php?t=529)
> 17x9 +20 Front
> 17x10 +35 Rear
>
> Tires will be 235 and 255’s
wow thats not gonna work at all, i hope you didnt just pick some random numbers out of the air for those offsets.
17x9 wont work with out spacer
nor will the tire with stock fenders.
17x10 +35 thats not gonna work either… maybe with spacer and a straight wheel
No pulling required with those offsets forsure.
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [February 9, 2006, 11:29am UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/19 "2006-02-09T11:29:19Z")
Umm i have fitted jamie’s 17x9’s +20 on and they do clear the coilover in the front, by about 7 mm’s
And anything will fit is is all a matter of a pull an camber. And i will have to pull for sure.
Thanx for trying.
Different coilovers take up different sizes so the wheels depend on the coilovers.
---
### Author:  [@sj250](https://forums.speedlife.net/u/sj250)
#### Post date: [February 14, 2006, 7:44pm UTC](https://forums.speedlife.net/t/lf-fender-roller/141421/20 "2006-02-14T19:44:50Z")
Hey Rob, I have been contemplating buying a roller, if you would be interested in pitching in a bit and then using it for as long as you need let me know, thanks!
[Next page](https://forums.speedlife.net/t/lf-fender-roller/141421.md?page=2)