# limits of a Tial 38mm wastegate
**URL:** https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201
**Category:** NYSpeed Automotive
**Created:** [November 15, 2008, 8:34am UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201 "2008-11-15T08:34:44Z")
**Posts on this page:** 7
**Page:** 2
### Author:  [@Saxon](https://forums.speedlife.net/u/Saxon)
#### Post date: [February 18, 2009, 8:38am UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/21 "2009-02-18T08:38:10Z")
> [@607motorsports](#):
>
> Good point… guess i’ve never tried running low boost on my setup though. The lowest i’ve went with it was 1 bar and didn’t notice creep there either.
well fwd in particular you should run as low as possible in the lower gears to maintain traction, i will help you out the best i can with your boost controller/setup btw so hopefully you get that bitch to hook this year :tup:
---
### Author:  [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)
#### Post date: [February 18, 2009, 9:30am UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/22 "2009-02-18T09:30:59Z")
> [@Baldturbofreak](#):
>
> Nothing wrong with welding mild steel to stainless. Just use 308 rod. I do it all the time.
> If you need Tial stuff or tig welding just gimme a hollar dude.
>
> Also, convert your mig to 309 wire and run Tri-gas. You’ll migweld stainless all day.
thanks rick. ill be in touch. 🙂
what kind of current do you typically need to weld stainless with a mig?
Brian
---
### Author:  [@Baldturbofreak](https://forums.speedlife.net/u/Baldturbofreak)
#### Post date: [February 18, 2009, 3:34pm UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/23 "2009-02-18T15:34:49Z")
As little as possible bud. As low as she can go and still make an nice pool.
---
### Author:  [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)
#### Post date: [February 19, 2009, 2:53am UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/24 "2009-02-19T02:53:42Z")
ok. so for something like sch 10 pipe are we talking 50A or 150? i only have a 130a mig. thats why i ask. 🙂
Brian
---
### Author:  [@Studderin](https://forums.speedlife.net/u/Studderin)
#### Post date: [February 21, 2009, 10:23pm UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/25 "2009-02-21T22:23:25Z")
> [@Baldturbofreak](#):
>
> As little as possible bud. As low as she can go and still make an nice pool.
you should make a intro post rick. I find them entertaining 🙂
---
### Author:  [@Firehawk853](https://forums.speedlife.net/u/Firehawk853)
#### Post date: [February 22, 2009, 12:17am UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/26 "2009-02-22T00:17:10Z")
> [@reliant\_turbo](#):
>
> ok. so for something like sch 10 pipe are we talking 50A or 150? i only have a 130a mig. thats why i ask. 🙂
>
> Brian
Depends on wire thickness and your travel speed welding. If you are using beveled weld els you should be fine with a 110v MIG. [www.millerwelds.com](http://www.millerwelds.com) is a great welding site with forum
---
### Author:  [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)
#### Post date: [February 22, 2009, 7:15pm UTC](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201/27 "2009-02-22T19:15:31Z")
> [@Studderin](#):
>
> you should make a intro post rick. I find them entertaining 🙂
that and a slazer post too 😉
> [@Firehawk853](#):
>
> Depends on wire thickness and your travel speed welding. If you are using beveled weld els you should be fine with a 110v MIG. [www.millerwelds.com](http://www.millerwelds.com) is a great welding site with forum
thanks for the info. ill have to give it a shot. 🙂
Brian
[Previous page](https://forums.speedlife.net/t/limits-of-a-tial-38mm-wastegate/58201.md?page=1)