# LKSi, again **URL:** \ **Category:** Shift518 Off Topic\ **Created:** [December 27, 2011, 5:20pm UTC](https://forums.speedlife.net/t/lksi-again/262037 "2011-12-27T17:20:18Z")\ **Posts on this page:** 20\ **Page:** 12
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:40pm UTC](https://forums.speedlife.net/t/lksi-again/262037/221 "2011-12-30T22:40:04Z")
> [@Murrdog9000"](#): > > You do a pretty good job of diverting the thread away from the other lies. That’s what going to rpi does. ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 10:40pm UTC](https://forums.speedlife.net/t/lksi-again/262037/222 "2011-12-30T22:40:16Z")
> [@\--- GRAND THEFT AUTO IV --- Thread!!!](https://forums.speedlife.net/t/grand-theft-auto-iv-thread/47618/135): > > Never Touched the pan Honda bond was way to perfect. Trust me I know. Even the bolts on the y pipe were rusted together again never touched. Can’t even move the oil pan an inch with out the y pipe removed. And an inch isn’t enough bc the oil pump will not clear. You never had the pan off Missed this, thanks Kevin. It came off/went back just fine. I never put fresh Honda bond on it either. Want pics of it off? It came off. It didn’t help me get leverage on the pan being off so when you started ramming it in there I kept telling you it wouldn’t work. But you’re Jiggs and it worked. Don’t know how/why. EDIT: Pics would be useless, you would just say I took pics of the second pan I have. ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:45pm UTC](https://forums.speedlife.net/t/lksi-again/262037/223 "2011-12-30T22:45:17Z")
> [@Stimulus Payment Schedule - check yours](https://forums.speedlife.net/t/stimulus-payment-schedule-check-yours/46338/126): > > Missed this, thanks Kevin. > > It came off/went back just fine. I never put fresh Honda bond on it either. Want pics of it off? It came off. It didn’t help me get leverage on the pan being off so when you started ramming it in there I kept telling you it wouldn’t work. But you’re Jiggs and it worked. > > Don’t know how/why. Nope oil pan would leak like a fuck if you didn’t re seal it. And that Pan is the used one you bought post it up bc it’s from a tl you can tell by the part code good try tho. Just fucking admit it holy shit. I know way more about Hondas then you do dont try to Test me. You have never had the pan off I wish I fucking took a picture fuck ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:48pm UTC](https://forums.speedlife.net/t/lksi-again/262037/224 "2011-12-30T22:48:12Z")
And when you pull the pan off the Honda bond seal rips maybe not in nick alero world but in realty they do ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:50pm UTC](https://forums.speedlife.net/t/lksi-again/262037/225 "2011-12-30T22:50:08Z")
And why would you have the oil pan from your car by your desk when it wa just drained. Even when they drain they still have oil in them unless you flip them over for a lOng while. ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 10:51pm UTC](https://forums.speedlife.net/t/lksi-again/262037/226 "2011-12-30T22:51:41Z")
Well there’s no point in posting it anyway, since I the pic shows the pan from the drain plug hole angle and nothing else. Part # isn’t etched in there. So I’m already fucked in Joe Jiggs Honda Dictionary. ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 10:53pm UTC](https://forums.speedlife.net/t/lksi-again/262037/227 "2011-12-30T22:53:00Z")
> [@E46 M3 vs 335 vs 135](https://forums.speedlife.net/t/e46-m3-vs-335-vs-135/47606/12): > > And why would you have the oil pan from your car by your desk when it wa just drained. Even when they drain they still have oil in them unless you flip them over for a lOng while. I didn’t give a shit about my room in my apartment. You should know that, I had the DSM tranny in my living room probably dripping trans fluid. The pan had sludge in the bottom so I sprayed it out with a hose. If we actually did get the pan off that day you would have seen how mint it was. Whatever Honda Bond was left was what I didn’t clean off the bottom of the block. ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [December 30, 2011, 10:53pm UTC](https://forums.speedlife.net/t/lksi-again/262037/228 "2011-12-30T22:53:42Z")
The web of lies continues to grow… ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 10:54pm UTC](https://forums.speedlife.net/t/lksi-again/262037/229 "2011-12-30T22:54:48Z")
I liked you better in the drunk tank Kevin. I’m done in here. ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:56pm UTC](https://forums.speedlife.net/t/lksi-again/262037/230 "2011-12-30T22:56:07Z")
> [@Exotic Car Rental in Buffalo](https://forums.speedlife.net/t/exotic-car-rental-in-buffalo/7751/19): > > I didn’t give a shit about my room in my apartment. You should know that, I had the DSM tranny in my living room probably dripping trans fluid. The pan had sludge in the bottom so I sprayed it out with a hose. If we actually did get the pan off that day you would have seen how mint it was. Whatever Honda Bond was left was what I didn’t clean off the bottom of the block. So your saying that your better at working on Hondas then me? bc I couldn’t get the y pipe bolts off. You must use the magic school bus when you work ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [December 30, 2011, 10:58pm UTC](https://forums.speedlife.net/t/lksi-again/262037/231 "2011-12-30T22:58:09Z")
> [@FS:2000 Gmc Sierra Z71 4x4 NEW PRICE $6500](https://forums.speedlife.net/t/fs-2000-gmc-sierra-z71-4x4-new-price-6500/40592/110): > > I liked you better in the drunk tank Kevin. I’m done in here. Yah because your not honest. > [@Jiggsy"](#): > > So your saying that your better at working on Hondas then me? bc I couldn’t get the y pipe bolts off. You must use the magic school bus when you work I’m crying ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 10:58pm UTC](https://forums.speedlife.net/t/lksi-again/262037/232 "2011-12-30T22:58:09Z")
Far from it. Far from better at cars than you. If I have the pan off and can’t get a real plug in it and you can manage it with the pan on then you’re the better car person. ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 10:59pm UTC](https://forums.speedlife.net/t/lksi-again/262037/233 "2011-12-30T22:59:43Z")
> [@WTB: a tv](https://forums.speedlife.net/t/wtb-a-tv/47588/6): > > Far from it. Far from better at cars than you. If I have the pan off and can’t get a real plug in it and you can manage it with the pan on then you’re the better car person. Why would take the pan off to put a drain plug in an aluminum pan ---
**Author:** ![Dread](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dread/32/6544_2.png) [@Dread](https://forums.speedlife.net/u/Dread)\ **Post date:** [December 30, 2011, 10:59pm UTC](https://forums.speedlife.net/t/lksi-again/262037/234 "2011-12-30T22:59:45Z")
All you teenagers need to punch each other in the face and get this shit over with ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 11:00pm UTC](https://forums.speedlife.net/t/lksi-again/262037/235 "2011-12-30T23:00:55Z")
> [@WTB: 2g talon stuff](https://forums.speedlife.net/t/wtb-2g-talon-stuff/47621/2): > > Why would take the pan off to put a drain plug in an aluminum pan It wasn’t a part I could find/had. The only drain plugs I found were what autozone/napa/whoever sells. ---
**Author:** ![1SLOWCAM](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1slowcam/32/6734_2.png) [@1SLOWCAM](https://forums.speedlife.net/u/1SLOWCAM)\ **Post date:** [December 30, 2011, 11:02pm UTC](https://forums.speedlife.net/t/lksi-again/262037/236 "2011-12-30T23:02:57Z")
> [@WTB: 97 talon HID's + projectors](https://forums.speedlife.net/t/wtb-97-talon-hids-projectors/45758/12): > > All you teenagers need to punch each other in the face and get this shit over with [ame][http://www.youtube.com/watch?v=\_hHDxlm66dE[/ame]](http://www.youtube.com/watch?v=_hHDxlm66dE%5B/ame%5D) ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [December 30, 2011, 11:03pm UTC](https://forums.speedlife.net/t/lksi-again/262037/237 "2011-12-30T23:03:19Z")
Nick can’t admit that he’s wrong/lies ---
**Author:** ![Jiggsy](https://avatars.discourse-cdn.com/v4/letter/j/35a633/32.png) [@Jiggsy](https://forums.speedlife.net/u/Jiggsy)\ **Post date:** [December 30, 2011, 11:05pm UTC](https://forums.speedlife.net/t/lksi-again/262037/238 "2011-12-30T23:05:04Z")
> [@Exotic Car Rental in Buffalo](https://forums.speedlife.net/t/exotic-car-rental-in-buffalo/7751/20): > > It wasn’t a part I could find/had. The only drain plugs I found were what autozone/napa/whoever sells. So instead of googling the size of the plug you pulled it off? Even the bolts in the Pan were never taken out come On I took a couple off they had that corroded aluminum feel to them that a bolt that has never been taking out feels like ---
**Author:** ![Murrdog9000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/murrdog9000/32/6391_2.png) [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)\ **Post date:** [December 30, 2011, 11:06pm UTC](https://forums.speedlife.net/t/lksi-again/262037/239 "2011-12-30T23:06:46Z")
Hey Nick how did the appendix surgery go? ---
**Author:** ![NickAlero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickalero/32/6440_2.png) [@NickAlero](https://forums.speedlife.net/u/NickAlero)\ **Post date:** [December 30, 2011, 11:06pm UTC](https://forums.speedlife.net/t/lksi-again/262037/240 "2011-12-30T23:06:52Z")
I had my oversized plug so I figured it would be fine. Anything you torque down has the same feeling though :lol Jiggs torque\>real torque. [Previous page](https://forums.speedlife.net/t/lksi-again/262037.md?page=11) [Next page](https://forums.speedlife.net/t/lksi-again/262037.md?page=13)