# Local Alum Diamondplate Source **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [August 13, 2009, 9:00am UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093 "2009-08-13T09:00:37Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 9:00am UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/1 "2009-08-13T09:00:37Z")
Anybody know where i can get the stuff? looking for 4x10 sheets and an aprox cost from a local supplier… also would need it to get cut into strips… ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [August 13, 2009, 9:22am UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/2 "2009-08-13T09:22:10Z")
time for some siq floormats? ---
**Author:** ![camarojoe](https://avatars.discourse-cdn.com/v4/letter/c/c67d28/32.png) [@camarojoe](https://forums.speedlife.net/u/camarojoe)\ **Post date:** [August 13, 2009, 9:41am UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/3 "2009-08-13T09:41:34Z")
Metal Supermarket on Elmwood in Kenmore/North Buffalo ? ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [August 13, 2009, 9:54am UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/4 "2009-08-13T09:54:26Z")
we have it. call 675-3897 ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 12:22pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/5 "2009-08-13T12:22:50Z")
> [@turbo ls1 ss](#): > > we have it. > call 675-3897 who is we? how mcuh for a 4X10 should i call and ask for anybody specific? this is for a non automotive application 😉 ---
**Author:** ![LAFENGAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lafengas/32/7573_2.png) [@LAFENGAS](https://forums.speedlife.net/u/LAFENGAS)\ **Post date:** [August 13, 2009, 12:26pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/6 "2009-08-13T12:26:30Z")
rigidized metals, near the skyway. They have a large assortment of aesthetic metals. ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [August 13, 2009, 12:30pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/7 "2009-08-13T12:30:59Z")
hmm… it is my girlfriend’s birthday soon and she mentioned wanting diamonds. ---
**Author:** ![LAFENGAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lafengas/32/7573_2.png) [@LAFENGAS](https://forums.speedlife.net/u/LAFENGAS)\ **Post date:** [August 13, 2009, 12:32pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/8 "2009-08-13T12:32:01Z")
> [@camarojoe](#): > > Metal Supermarket on Elmwood in Kenmore/North Buffalo ? I would only reccommend them when you need cuts off of whole sheets, since most suppliers won’t let you take anything less then a half a sheet of anything. Metal supermarkets would be good for anything less then a 4’x4’ sheet. The same for bar stock and tubing. Otherwise they are WAAYYYYY overpriced. ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 12:38pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/9 "2009-08-13T12:38:35Z")
i need the 4X10 sheets cut into 12"X10’ strips ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [August 13, 2009, 12:41pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/10 "2009-08-13T12:41:02Z")
This stuff is fairly expensive from what I recall… ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 12:42pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/11 "2009-08-13T12:42:49Z")
> [@newman](#): > > This stuff is fairly expensive from what I recall… online ive seen ~ 35 bux for a 14"X96" cut shipped… i need ~ 14" X 60’ ---
**Author:** ![LAFENGAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lafengas/32/7573_2.png) [@LAFENGAS](https://forums.speedlife.net/u/LAFENGAS)\ **Post date:** [August 13, 2009, 12:47pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/12 "2009-08-13T12:47:44Z")
then why would you get it cut down to 12" strips? would like to see the link for $35 shipped. That’s a steal…unless it’s like aluminum foil. ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [August 13, 2009, 12:49pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/13 "2009-08-13T12:49:19Z")
> [@Viper966](#): > > i need the 4X10 sheets cut into 12"X10’ strips > [@Viper966](#): > > i need ~ 14" X 60’ i think you need to measure twice, cut once, haha… It comes in .100, .125 and .188 What do you need? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [August 13, 2009, 12:53pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/14 "2009-08-13T12:53:28Z")
After looking at this PDF, I would give “hadco metal trading” a call… [http://www.pinellascounty.org/purchase/ARCHIVED\_BIDS/078\_0532\_B(SS)DP06NOV08.pdf](http://www.pinellascounty.org/purchase/ARCHIVED_BIDS/078_0532_B(SS)DP06NOV08.pdf) [http://hadco-metal.com/](http://hadco-metal.com/) 142 bucks for a sheet at low quantity… you get 4 10 foot pieces out of a sheet, that’s 36 each, plus delivery and cutting. that was for .125, tho, so if you go down to .100, it should be even cheaper. ---
**Author:** ![Fry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fry/32/7284_2.png) [@Fry](https://forums.speedlife.net/u/Fry)\ **Post date:** [August 13, 2009, 12:55pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/15 "2009-08-13T12:55:20Z")
Kitchen backsplash? ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 12:56pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/16 "2009-08-13T12:56:46Z")
> [@LAFENGAS](#): > > then why would you get it cut down to 12" strips? > > would like to see the link for $35 shipped. That’s a steal…unless it’s like aluminum foil. i havnt measured the area where the strips are going yet… im basically using this stuff as a baseboard in my garage… im coating the floors this weekend with epoxy but the concrete goes up the walls ~ 12-14" along walls… and its drywall above that… Link for the cheap Alum diamondplate via ebay… free shipping and 15% off using cashback… [http://cgi.ebay.com/3003-Aluminum-Diamond-Plate-063-x-14-x-94-25\_W0QQitemZ390080715486QQcmdZViewItemQQptZLH\_DefaultDomain\_0?hash=item5ad29f5ade&\_trksid=p3286.c0.m14](http://cgi.ebay.com/3003-Aluminum-Diamond-Plate-063-x-14-x-94-25_W0QQitemZ390080715486QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5ad29f5ade&_trksid=p3286.c0.m14) so i was thinking about using the diamond-plate as a baseboard to cover this concrete on the wall… so the thickness doesn’t matter since its just decorative ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [August 13, 2009, 12:58pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/17 "2009-08-13T12:58:30Z")
why not just paint up to the drywall with the epoxy? ---
**Author:** ![Fry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fry/32/7284_2.png) [@Fry](https://forums.speedlife.net/u/Fry)\ **Post date:** [August 13, 2009, 1:00pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/18 "2009-08-13T13:00:14Z")
Ground effects in the garage? Ricer. 😛 ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [August 13, 2009, 1:02pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/19 "2009-08-13T13:02:10Z")
it says custom sizes are available, give them a call? ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [August 13, 2009, 1:06pm UTC](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093/20 "2009-08-13T13:06:11Z")
> [@theblue](#): > > why not just paint up to the drywall with the epoxy? i thought about that, and saw some other people on the garage journal that did this… but i dont like the look of it… especially since the bottom of the drwall where it meets the concrete is rough, so it wont look that nice the diamondplate will look nicer Like this but without the crown moulding or the corner crap… above the diamond plate i may 2 tone the room with black paint with white above that… havnt decideded the epoxy flooring i bought is a white base with a granite looking mix of color chips and ill be doing a semi heavy broadcast with a 100% solids clearcoat ![http://www.originalcolorchips.com/store/images/blackmarblesparkleblend.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/8/6/86a360b13ab6c81ffb98e456ba4fe25bcd9342e5.jpeg) [Next page](https://forums.speedlife.net/t/local-alum-diamondplate-source/72093.md?page=2)