# Local diamond plate supplier?

**URL:** <https://forums.speedlife.net/t/local-diamond-plate-supplier/203683>\
**Category:** PittSpeed Off Topic\
**Created:** [September 10, 2009, 8:39am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683 "2009-09-10T08:39:12Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [September 10, 2009, 8:39am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/1 "2009-09-10T08:39:12Z")

</div>

Looking for a local metal supplier that would carry aluminum diamond plate and can cut 4x8 sheets to shorter widths. Going to stop out at All Metal in Youngwood but wanted to get another price somewhere else.

Unless the wife axes the project. 🙂

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [September 10, 2009, 8:45am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/2 "2009-09-10T08:45:41Z")

</div>

it will be pricey either way… if you can talk to supllier and see if they can shear it to size for you. if you want 8ft long but 6inch wide have them shear the whole sheet to 6 inch strips. will save a lot of time and money that way.

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [September 10, 2009, 9:10am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/3 "2009-09-10T09:10:07Z")

</div>

i know Tom eusty that works @ All metal

---

<div class="post-metadata">

**Author:** ![flyinglow57](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/flyinglow57/32/5978_2.png) [@flyinglow57](https://forums.speedlife.net/u/flyinglow57)\
**Post date:** [September 10, 2009, 7:31pm UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/4 "2009-09-10T19:31:18Z")

</div>

there is a metal fabrication place on cochrans mill rd in jefferson hills. they do all the metal work for haddads truck rental great guys the name leaves me right now… its some letters. like d&s is what i think it might be.

---

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [September 11, 2009, 4:07am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/5 "2009-09-11T04:07:05Z")

</div>

Found it. You’re right, D&S Fabricating & Welding. Now that I have my measurements I should be able to ask for a specific quote.

---

<div class="post-metadata">

**Author:** ![foo714](https://avatars.discourse-cdn.com/v4/letter/f/58956e/32.png) [@foo714](https://forums.speedlife.net/u/foo714)\
**Post date:** [September 11, 2009, 4:10am UTC](https://forums.speedlife.net/t/local-diamond-plate-supplier/203683/6 "2009-09-11T04:10:31Z")

</div>

multi-metal or jeannette steel may have what you’re looking for, multi is in delmont, jeannette steel, u can figure out where that is