# Local place for AN hardware? **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [September 27, 2006, 10:31am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107 "2006-09-27T10:31:09Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\ **Post date:** [September 27, 2006, 10:31am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/1 "2006-09-27T10:31:09Z")
Need some hardware for my Lotus replica, anyplace local? ---
**Author:** ![jrex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrex/32/7232_2.png) [@jrex](https://forums.speedlife.net/u/jrex)\ **Post date:** [September 27, 2006, 10:32am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/2 "2006-09-27T10:32:10Z")
Ferry Hydraulic ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [September 27, 2006, 10:36am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/3 "2006-09-27T10:36:17Z")
Ferry… ---
**Author:** ![Tunerfreak](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tunerfreak/32/7427_2.png) [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)\ **Post date:** [September 27, 2006, 10:52am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/4 "2006-09-27T10:52:39Z")
KS Auto ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [September 27, 2006, 10:57am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/5 "2006-09-27T10:57:57Z")
hardware or fittings. all the above places listed are for fittings, not AN grade hardware. ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [September 27, 2006, 11:04am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/6 "2006-09-27T11:04:53Z")
> [@jrex](#): > > Ferry Hydraulic :word: ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [September 27, 2006, 11:06am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/7 "2006-09-27T11:06:03Z")
+1 for ferry, they are the roxor…on walden between union and transit ---
**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\ **Post date:** [September 27, 2006, 11:18am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/8 "2006-09-27T11:18:14Z")
> [@newman](#): > > hardware or fittings. all the above places listed are for fittings, not AN grade hardware. Hardware, not fittings. This Ferry’s place doesn’t have hardware? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [September 27, 2006, 11:22am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/9 "2006-09-27T11:22:27Z")
> [@eMKay](#): > > Hardware, not fittings. This Ferry’s place doesn’t have hardware? I don’t know for sure… You’d need to call… I figured you didn’t need fittings… everyone else probably thinks you do… I’d give them a ring, can’t hurt. But alot of the people there are kinda dumb, so make sure you tell them what you need… They are a hydraulic supply place, so i question their hardware selection… ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [September 27, 2006, 11:36am UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/10 "2006-09-27T11:36:13Z")
Ferry has always had any hardware, tools, fittings, in metric, SAE flare, and AN flare. They have just about anything I have needed what exactly do you need? ---
**Author:** ![mike125k](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike125k/32/7282_2.png) [@mike125k](https://forums.speedlife.net/u/mike125k)\ **Post date:** [September 27, 2006, 12:22pm UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/11 "2006-09-27T12:22:27Z")
Ferry has a great selection of AN stuff in general, so I would still look them up. They’ve always had what I needed, and I would usually go there looking for the most most oddball shit too. ---
**Author:** ![n20junkie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/n20junkie/32/7396_2.png) [@n20junkie](https://forums.speedlife.net/u/n20junkie)\ **Post date:** [September 27, 2006, 2:07pm UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/12 "2006-09-27T14:07:13Z")
> [@newman](#): > > hardware or fittings. all the above places listed are for fittings, not AN grade hardware. Based off of what, the aeroquip stamp is different for aircraft grade vs all the normal stuff. There is no “an grade” unless your speaking of mil-spec, but no civilain aircraft is needed to use mil-spec anything. I am allowed to use (under 14 cfr part 43 ) to supply my own parts as an owner that meet the original design criteria. For all small aircraft with working pressures under 3,000 psi, anything will pretty much work. How do i know, cause the FAA licensed me to know. The ferry stuff is just as good as anything else you can buy. I would think that car has nothing over 3,000 psi, so your fine. ---
**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\ **Post date:** [September 27, 2006, 2:44pm UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/13 "2006-09-27T14:44:22Z")
> [@Carnut](#): > > Ferry has always had any hardware, tools, fittings, in metric, SAE flare, and AN flare. They have just about anything I have needed what exactly do you need? some 3/8 and 1/2 inch bolts nuts and washers. ---
**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\ **Post date:** [September 27, 2006, 2:47pm UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/14 "2006-09-27T14:47:11Z")
> [@n20junkie](#): > > Based off of what, the aeroquip stamp is different for aircraft grade vs all the normal stuff. There is no “an grade” unless your speaking of mil-spec, but no civilain aircraft is needed to use mil-spec anything. I am allowed to use (under 14 cfr part 43 ) to supply my own parts as an owner that meet the original design criteria. For all small aircraft with working pressures under 3,000 psi, anything will pretty much work. How do i know, cause the FAA licensed me to know. The ferry stuff is just as good as anything else you can buy. I would think that car has nothing over 3,000 psi, so your fine. It’s not the strength I need, grade 8 will do. It’s the consistency in sizing, and the grip length. ---
**Author:** ![Rx3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rx3/32/7194_2.png) [@Rx3](https://forums.speedlife.net/u/Rx3)\ **Post date:** [September 27, 2006, 2:53pm UTC](https://forums.speedlife.net/t/local-place-for-an-hardware/18107/15 "2006-09-27T14:53:53Z")
> [@eMKay](#): > > some 3/8 and 1/2 inch bolts nuts and washers. If that’s all you need, just go to Hectors, they have Grade 8. If Hectors doesn’t have it, go to Northstate on Military, or Fastenal in Clarence. Northstate and Fastenal can do a good job of size consistency, especially if you have specifc length bolts or thread pitches that aren’t standard. I had to do that when rebuilding my suspension on my car last year. I’d only go to Ferry if you need AN fittings, SS braided stuff, or other really weird fittings for pressure (fuel lines, etc).