# Looking 4 advice on shop to do swap **URL:** \ **Category:** SON240sx Automotive\ **Created:** [March 19, 2004, 7:07am UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741 "2004-03-19T07:07:53Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![NissanGTR](https://avatars.discourse-cdn.com/v4/letter/n/f04885/32.png) [@NissanGTR](https://forums.speedlife.net/u/NissanGTR)\ **Post date:** [March 19, 2004, 7:07am UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/1 "2004-03-19T07:07:53Z")
i am looking for a shop to help me get my 89 started Swap Information: 89 240sx Body 93 s13 240sx Motor Ka24de 93 s13 240sx Tranny 93 s13 240sx Ecu 93 s13 240sx Harness ( needs some work ) everything is mounted harness work done the car cranks doesn’t start fuel pump doesn’t turn on must be a harness issue, when you feed it fuel from top the motor cranks/starts. i need a shop that can fix this car and won’t charge me arm and a leg. I Prefer Near Finch and Duffrin. Thank You All IN advance. ---
**Author:** ![prodigy](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@prodigy](https://forums.speedlife.net/u/prodigy)\ **Post date:** [March 19, 2004, 5:07pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/2 "2004-03-19T17:07:02Z")
[http://www.cpracing.ca](http://www.cpracing.ca) $50/hr. for paid SON Members. ---
**Author:** ![NissanGTR](https://avatars.discourse-cdn.com/v4/letter/n/f04885/32.png) [@NissanGTR](https://forums.speedlife.net/u/NissanGTR)\ **Post date:** [March 19, 2004, 9:41pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/3 "2004-03-19T21:41:47Z")
paid SON Members ?? dont tell me this site started a pay membership ---
**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\ **Post date:** [March 19, 2004, 10:08pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/4 "2004-03-19T22:08:06Z")
> [@NissanGTR](#): > > paid SON Members ?? > > dont tell me this site started a pay membership Uhhh… It’s has been for over two years now. You don’t have to join but you will be missing out on alot. ---
**Author:** ![NissanGTR](https://avatars.discourse-cdn.com/v4/letter/n/f04885/32.png) [@NissanGTR](https://forums.speedlife.net/u/NissanGTR)\ **Post date:** [March 21, 2004, 8:47pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/5 "2004-03-21T20:47:15Z")
come on people no one can help me out i am sure you all know of at least one good shop i am in need of help thanks in advance to anyone that reply to this ---
**Author:** ![2\_FOUR\_O](https://avatars.discourse-cdn.com/v4/letter/2/e9bcb4/32.png) [@2\_FOUR\_O](https://forums.speedlife.net/u/2_FOUR_O)\ **Post date:** [March 23, 2004, 12:55pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/6 "2004-03-23T12:55:02Z")
Im getting mine done at racing evolution in mississauga. $1500, and the guy really knows his cars. My buddy got his sr installed there and he says its been running great…let me know if u want more info ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 23, 2004, 2:11pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/7 "2004-03-23T14:11:00Z")
is that 1400 installed??? or was that the cost of the labour ---
**Author:** ![iQuAGoD](https://avatars.discourse-cdn.com/v4/letter/i/f05b48/32.png) [@iQuAGoD](https://forums.speedlife.net/u/iQuAGoD)\ **Post date:** [March 23, 2004, 6:12pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/8 "2004-03-23T18:12:53Z")
Get an SR so I can install it for you in my gravel driveway. ---
**Author:** ![NissanGTR](https://avatars.discourse-cdn.com/v4/letter/n/f04885/32.png) [@NissanGTR](https://forums.speedlife.net/u/NissanGTR)\ **Post date:** [March 24, 2004, 8:33am UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/9 "2004-03-24T08:33:10Z")
Thankx for all the replys but it doesn’t answere my question really 1st of all i can do a sr swap my self, this is not a sr swap. This car is a 89 240sx i put a ka24de motor in it again i did most of the work on this car but since the harness of the ka motor was cut because the plugs where used on my sr swap there was some harness work to be done. I droped the motor did the harness work but the car doesn’t start and i don’t have room anymore at home to work on this car again the car doesn’t start but when you feed it gas from on top the motor cranks and starts the fuelpump doesn’t come on and there is no signal at the fuelpump so i am thinking a few wires up by the battery must be mixed up i just need a good shop thats not going to cost me a arm and a lag to finish what i have started. again if anyone knows a good shop that knows what there doing and can do this 93 in 89 swap for me let me know ---
**Author:** ![iQuAGoD](https://avatars.discourse-cdn.com/v4/letter/i/f05b48/32.png) [@iQuAGoD](https://forums.speedlife.net/u/iQuAGoD)\ **Post date:** [March 24, 2004, 9:40am UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/10 "2004-03-24T09:40:17Z")
Wire a switch straight from your battery to your fuel pump and turn it on and off manually. I had to do that when my SR ECU fried itself and didnt want to turn the fuel pump on. ---
**Author:** ![NissanGTR](https://avatars.discourse-cdn.com/v4/letter/n/f04885/32.png) [@NissanGTR](https://forums.speedlife.net/u/NissanGTR)\ **Post date:** [March 24, 2004, 11:54pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/11 "2004-03-24T23:54:21Z")
> [@iQuABoB](#): > > Wire a switch straight from your battery to your fuel pump and turn it on > and off manually. I had to do that when my SR ECU fried itself and didnt > want to turn the fuel pump on. you think maybe the ECU is fried ? i am thinking maybe i didn’t do the wiring right because some of the colors don’t mach so i was thinking its most likely a harness issue how can i test the ecu i mean the ecu red light truns ON but thats about all i know about the ecu at this time if i can get a “uncut harness” than i’ll know if its a wiring issue or not if anyone has a 91+ s13 KA24DE Harness for sale let me Know ---
**Author:** ![DarkForceJackal](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@DarkForceJackal](https://forums.speedlife.net/u/DarkForceJackal)\ **Post date:** [March 26, 2004, 12:25pm UTC](https://forums.speedlife.net/t/looking-4-advice-on-shop-to-do-swap/80741/12 "2004-03-26T12:25:20Z")
There is a shop i’ve been to with my Pulsar several times called “Whitehead Performance” located I think just south of Dufferin and Finch. They work almost exclusively on Nissans and are in your area. My brother has their business card so let me know if you want any info/# etc.