# looking for 350 Chev **URL:** \ **Category:** Classifieds\ **Created:** [December 7, 2008, 5:26pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647 "2008-12-07T17:26:46Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 7, 2008, 5:26pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/1 "2008-12-07T17:26:46Z")
looking for 350 chevy motor for a friend. must be a runner. thanks ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:28pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/2 "2008-12-07T17:28:02Z")
how much does he wanna spend ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [December 7, 2008, 5:29pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/3 "2008-12-07T17:29:32Z")
Got a nice 454 and TH400… ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:30pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/4 "2008-12-07T17:30:21Z")
> [@94Gt5.0](#): > > Got a nice 454 and TH400… thats got me all over it ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 7, 2008, 5:35pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/5 "2008-12-07T17:35:39Z")
well the j/k said 350 for 87-95 motor with 30 day warranty for cracks but if you have something let me know he will go higher if it has under 100k and runs good. ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [December 7, 2008, 5:36pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/6 "2008-12-07T17:36:46Z")
> [@88slowmarro](#): > > thats got me all over it Do it. Id put it in a Monte Carlo instead of a Camaro though and I know where theres a tubbed Monte Carlo SS thats going to be for sale soon without a motor and tranny. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:38pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/7 "2008-12-07T17:38:20Z")
got a 88 roller motor wit 45 miles on it 383 fully forged top end runs solid just rebuilt by yours truly 1500 wit a tailight warr on it ---
**Author:** ![Hank1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hank1/32/6329_2.png) [@Hank1](https://forums.speedlife.net/u/Hank1)\ **Post date:** [December 7, 2008, 5:39pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/8 "2008-12-07T17:39:14Z")
i’ve got 2 motors a short block 454 for 1,300$ firm all brandy new go fast parts and balanced and 93 chevy 350 out of an yukon with 80k on it ran and drove in to shop. 500$ yanked motor for another project for a guy and now he dont want it. H ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:40pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/9 "2008-12-07T17:40:43Z")
> [@Hank](#): > > i’ve got 2 motors a short block 454 for 1,300$ firm all brandy new go fast parts and balanced and 93 chevy 350 out of an yukon with 80k on it ran and drove in to shop. 500$ yanked motor for another project for a guy and now he dont want it. > > H hank what ya got for alu small block heads ma brotha ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 7, 2008, 5:44pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/10 "2008-12-07T17:44:49Z")
Hey Hank, does it have a block off plate for fuel pump? i need to run mechanical fuel pump on it. let me know thanks. ---
**Author:** ![Hank1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hank1/32/6329_2.png) [@Hank1](https://forums.speedlife.net/u/Hank1)\ **Post date:** [December 7, 2008, 5:46pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/11 "2008-12-07T17:46:22Z")
i dont recall. i’ll have to look at it tomorrow… ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [December 7, 2008, 5:46pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/12 "2008-12-07T17:46:36Z")
454&TH400 for $1500 ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:51pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/13 "2008-12-07T17:51:10Z")
> [@MclarenGP](#): > > Hey Hank, does it have a block off plate for fuel pump? i need to run mechanical fuel pump on it. let me know thanks. all ya need to do is take it off and put a carb style cam in it and a pushrod to drive it not hard ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 7, 2008, 5:52pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/14 "2008-12-07T17:52:39Z")
alright so i need a roller cam with a lobe for the pump. the guy on jegs told me not all of them have the block off plate after a certain year? im not sure. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [December 7, 2008, 5:54pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/15 "2008-12-07T17:54:18Z")
all small blocks have em ,no wait they dont the vortec headed ones dont so hanks would be a no go ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [December 7, 2008, 6:18pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/16 "2008-12-07T18:18:37Z")
08 5.3 vortech with 3k on it… 2500.00 and he can have it. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 8, 2008, 4:05pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/17 "2008-12-08T16:05:30Z")
alright well thanks anyway Hank. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [December 8, 2008, 4:07pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/18 "2008-12-08T16:07:50Z")
oh yea and thanks for the info slowmarro. ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [December 8, 2008, 4:13pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/19 "2008-12-08T16:13:36Z")
Hank- will the motor you have work in a '97 Tahoe? ---
**Author:** ![Hank1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hank1/32/6329_2.png) [@Hank1](https://forums.speedlife.net/u/Hank1)\ **Post date:** [December 8, 2008, 5:04pm UTC](https://forums.speedlife.net/t/looking-for-350-chev/240647/20 "2008-12-08T17:04:20Z")
just have to change heads and manifold. that was my intentions to stick it in my truck. the diff is the heads have different bolt pattern for the manifold. [Next page](https://forums.speedlife.net/t/looking-for-350-chev/240647.md?page=2)