# looking for a cable **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [March 31, 2009, 5:34pm UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386 "2009-03-31T17:34:46Z")\ **Posts on this page:** 6\ **Page:** 2
**Author:** ![jph102900](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jph102900/32/6049_2.png) [@jph102900](https://forums.speedlife.net/u/jph102900)\ **Post date:** [April 1, 2009, 10:21am UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/21 "2009-04-01T10:21:22Z")
> [@doesnt anyone post on WNY F body?](https://forums.speedlife.net/t/doesnt-anyone-post-on-wny-f-body/39968/9): > > Did you try Radio Shack? or [radioshack.com](http://radioshack.com) :bowrofl::bowrofl: ---
**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\ **Post date:** [April 1, 2009, 11:31am UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/22 "2009-04-01T11:31:13Z")
> [@doesnt anyone post on WNY F body?](https://forums.speedlife.net/t/doesnt-anyone-post-on-wny-f-body/39968/9): > > Did you try Radio Shack? or [radioshack.com](http://radioshack.com) :stick: ---
**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\ **Post date:** [April 1, 2009, 12:09pm UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/23 "2009-04-01T12:09:53Z")
i have one ---
**Author:** ![Sinner6.0L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sinner6.0l/32/6016_2.png) [@Sinner6.0L](https://forums.speedlife.net/u/Sinner6.0L)\ **Post date:** [April 1, 2009, 5:15pm UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/24 "2009-04-01T17:15:21Z")
> [@FS: 2003 yamaha Blaster 200, NEED TO SELL, MAKE OFFER, PIX pIX](https://forums.speedlife.net/t/fs-2003-yamaha-blaster-200-need-to-sell-make-offer-pix-pix/35651/54): > > dont need boost. but I will run pig rich at idle with these cams and will have to tune the entire powerband you’ll run rich either way, your pcm will command 14.7:1 but with all the overlap from the cam it’ll over compensate with fuel for the extra O2 getting dumped down the exhaust. unless you run straight open loop you won’t be able to change it. have you done any research on what AFR you need to run at wide open? high compression & boost i’m shooting for 11.5:1, right now it’s a little lean at 12.3 but i may be out of injectors ---
**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\ **Post date:** [April 2, 2009, 3:00pm UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/25 "2009-04-02T15:00:30Z")
> [@New BMW e30 parts thread (85-91)](https://forums.speedlife.net/t/new-bmw-e30-parts-thread-85-91/32947/10): > > you’ll run rich either way, your pcm will command 14.7:1 but with all the overlap from the cam it’ll over compensate with fuel for the extra O2 getting dumped down the exhaust. > > unless you run straight open loop you won’t be able to change it. > > have you done any research on what AFR you need to run at wide open? high compression & boost i’m shooting for 11.5:1, right now it’s a little lean at 12.3 but i may be out of injectors I know I wont be able to change much in closed loop. open loop is where I need the work. Only thing I’ll be doing at lo-throttle will be getting the map sensor voltage to around 1.5-1.7 volts. NA on the neon engine your suppose to aim for a 13.0 - 13.2 WOT ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [April 2, 2009, 3:15pm UTC](https://forums.speedlife.net/t/looking-for-a-cable/202386/26 "2009-04-02T15:15:16Z")
can it do WOT with out a runway ? [Previous page](https://forums.speedlife.net/t/looking-for-a-cable/202386.md?page=1)