# Looking for a good 4wd transmission builder.
**URL:** https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112
**Category:** NYSpeed Automotive
**Created:** [May 27, 2008, 1:38pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112 "2008-05-27T13:38:18Z")
**Posts on this page:** 15
**Page:** 1
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 27, 2008, 1:38pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/1 "2008-05-27T13:38:18Z")
I’ve got an 03 Nissan XTerra in the shop that has a severe case of corrosion between the transmission mount and the transmission case itself. Looks like a bad case of dissimilar metal corrosion. It was bad enough that it ate through the case enough to cause it to start leaking slightly.
Looking for someone who can dismantle this and replace that one section of the case.
FWIW, it’s a 3.3 N.A., 5-speed manual
---
### Author:  [@BDR5oh](https://forums.speedlife.net/u/BDR5oh)
#### Post date: [May 27, 2008, 1:39pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/2 "2008-05-27T13:39:09Z")
Northeastern trans parts on baily … IMHO … the BEST
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [May 27, 2008, 1:47pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/3 "2008-05-27T13:47:27Z")
Come on Jason JB Weld that bitch LOL
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 27, 2008, 1:49pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/4 "2008-05-27T13:49:26Z")
> [@Pauly](#):
>
> Come on Jason JB Weld that bitch LOL
so ironic that you post right now. I’ll tell you why later
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 27, 2008, 1:50pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/5 "2008-05-27T13:50:15Z")
> [@BDR5oh](#):
>
> Northeastern trans parts on baily … IMHO … the BEST
Do they just sell parts or do the disassembly/reassembly also?
hell…I’ll just call them
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [May 27, 2008, 1:51pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/6 "2008-05-27T13:51:38Z")
It would be called job security- If it leaked and i got the complaint i could just play dumb LOL
and ??? whats going on?
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 27, 2008, 2:00pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/7 "2008-05-27T14:00:43Z")
> [@BDR5oh](#):
>
> Northeastern trans parts on baily … IMHO … the BEST
nope. they said they don’t do Nissan.
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 27, 2008, 2:01pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/8 "2008-05-27T14:01:12Z")
> [@Pauly](#):
>
> and ??? whats going on?
Oh, all of my stuff is out finally. Literally just as you made that post.
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [May 27, 2008, 2:15pm UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/9 "2008-05-27T14:15:12Z")
Cool good job. Wow folks look at that a repair shop that registered!!! Now i can start reffering folks. Now wasnt that easy jason LOL
Now about my buddy from work with the Vdub problems LOL
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 28, 2008, 5:45am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/10 "2008-05-28T05:45:35Z")
So, no other manual trans shops out there that folks have personal experience with?
---
### Author:  [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)
#### Post date: [May 28, 2008, 5:48am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/11 "2008-05-28T05:48:09Z")
> [@bracketracer](#):
>
> so ironic that you post right now. I’ll tell you why later
Ummm what?
I want to know right now.:squint:
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 28, 2008, 5:53am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/12 "2008-05-28T05:53:42Z")
> [@AWDrifter](#):
>
> Ummm what?
> I want to know right now.:squint:
LOL! It has nothing to do with yours! I said 5-spd, not 6-spd.
Although it would be nice if 2Bennett would return my call.
Also, you need to do the Dunnville thing next go-round. Very well run, and no worries about someone punting your grocery-getter.
---
### Author:  [@Blue\_Eyed\_Devil](https://forums.speedlife.net/u/Blue_Eyed_Devil)
#### Post date: [May 28, 2008, 6:09am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/13 "2008-05-28T06:09:15Z")
> [@bracketracer](#):
>
> LOL! It has nothing to do with yours! I said 5-spd, not 6-spd.
>
> Although it would be nice if 2Bennett would return my call.
>
> Also, you need to do the Dunnville thing next go-round. Very well run, and no worries about someone punting your grocery-getter.
I just realized you left a voice mail… yesterday. :smash2:
---
### Author:  [@POOPRA](https://forums.speedlife.net/u/POOPRA)
#### Post date: [May 28, 2008, 6:14am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/14 "2008-05-28T06:14:02Z")
why not just source a used replacement?
---
### Author:  [@bracketracer](https://forums.speedlife.net/u/bracketracer)
#### Post date: [May 28, 2008, 6:32am UTC](https://forums.speedlife.net/t/looking-for-a-good-4wd-transmission-builder/49112/15 "2008-05-28T06:32:37Z")
> [@POOPRA](#):
>
> why not just source a used replacement?
I’ve got a few that I can get, but they’re pretty heavy money due to relative scarcity. So, just trying to weigh out alternatives for my customer. I believe the section of case that I need runs right around 180-200 bucks, so I’m still leaning that way.