# Looking for a place that will install a LSD **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [August 22, 2007, 10:05am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257 "2007-08-22T10:05:20Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![snowracer101](https://avatars.discourse-cdn.com/v4/letter/s/258eb7/32.png) [@snowracer101](https://forums.speedlife.net/u/snowracer101)\ **Post date:** [August 22, 2007, 10:05am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/1 "2007-08-22T10:05:20Z")
I have a 03 dodge ram 2500 with the cummins diesel in it. As of right now, it has a open rear diff. which, with the banks six gun, the truck pulls one wheel peels like you wouldn’t believe. where should I call to get a limited slip installed. either a limited slip or a locker. I want something very aggresive. I called jiim deans and they don’t do rear end work. any suggestions? ---
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [August 22, 2007, 10:20am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/2 "2007-08-22T10:20:27Z")
Competition Transmission in North Tonawanda. They did a great job replacing the clutch packs in the rear diff of my Expedition and were recommended by a regular autocrosser who owns his own shop (Mr Goodwrench on GI). He was originally going to do the work himself but needed some special tools, so he outsourced it to them. ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [August 22, 2007, 10:26am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/3 "2007-08-22T10:26:55Z")
it will not help on the MPG’s, jim didn’t tell you where to go? why do you need one? ---
**Author:** ![snowracer101](https://avatars.discourse-cdn.com/v4/letter/s/258eb7/32.png) [@snowracer101](https://forums.speedlife.net/u/snowracer101)\ **Post date:** [August 22, 2007, 11:02am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/4 "2007-08-22T11:02:12Z")
[quote=“Anonymity,post:3,topic:34257"”] it will not help on the MPG’s, jim didn’t tell you where to go? why do you need one? [/quote] I’Mnot looking to help on mpg… my truck has 800ft-lbs of torque. an open diff is :cjerk: ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [August 22, 2007, 11:22am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/5 "2007-08-22T11:22:53Z")
my truck had 800 ft-lbs. and when you put a locker in it, you WILL lose the trans, just an FYI. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [August 22, 2007, 11:27am UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/6 "2007-08-22T11:27:47Z")
united 4 wheel drive in clarence is big in off roading and installs lockers and gears all the time, matts a good guy ---
**Author:** ![matter](https://avatars.discourse-cdn.com/v4/letter/m/97f17d/32.png) [@matter](https://forums.speedlife.net/u/matter)\ **Post date:** [August 22, 2007, 12:33pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/7 "2007-08-22T12:33:03Z")
[quote=“Anonymity,post:5,topic:34257"”] my truck had 800 ft-lbs. and when you put a locker in it, you WILL lose the trans, just an FYI. [/quote] A limited slip is not a locker, more like a posi ---
**Author:** ![mike125k](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike125k/32/7282_2.png) [@mike125k](https://forums.speedlife.net/u/mike125k)\ **Post date:** [August 22, 2007, 1:01pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/8 "2007-08-22T13:01:18Z")
[quote=“matter,post:7,topic:34257"”] A limited slip is not a locker, more like a posi [/quote] thats wrong too. a “posi” just developed as short for positive traction which was fully locked all the time. limited slip does like its name implies, acts like an open diff until you get a big speed delta between sides and then limits slip by “locking” the two axles together via a clutch pack, gears, etc. ---
**Author:** ![97FormulaWS-6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/97formulaws-6/32/7384_2.png) [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)\ **Post date:** [August 22, 2007, 1:05pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/9 "2007-08-22T13:05:40Z")
[quote=“mike125k,post:8,topic:34257"”] thats wrong too. a “posi” just developed as short for positive traction which was fully locked all the time. limited slip does like its name implies, acts like an open diff until you get a big speed delta between sides and then limits slip by “locking” the two axles together via a clutch pack, gears, etc. [/quote] Wow, you’re screwed up as well… Limited Slip = Posi!!!; Posi was a term developed by GM as a marketing thing, it’s the same technology. They both use some sort of friction surface or material (Clutch packs or cones)to make both axles “stick” together and rotate the same, but still allow for them to rotate at different rates by slipping (Thus, limited slip) Lockers are totally different; they use some method of locking splines together and releasing them, either by spring pressure (pre-set units), or air (Remote locking units) And then there’s Torsen diff’s as well which use gears to control the delta in axle speeds; typically used in road-racing. Neither act like an “open” diff when going in a straight line; they act similar to an open diff when going around corners. ---
**Author:** ![91CRXSI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91crxsi/32/7247_2.png) [@91CRXSI](https://forums.speedlife.net/u/91CRXSI)\ **Post date:** [August 22, 2007, 1:06pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/10 "2007-08-22T13:06:51Z")
[quote=“mike125k,post:8,topic:34257"”] thats wrong too. a “posi” just developed as short for positive traction which was fully locked all the time. limited slip does like its name implies, acts like an open diff until you get a big speed delta between sides and then limits slip by “locking” the two axles together via a clutch pack, gears, etc. [/quote] yea but a LOCKER makes it so the 2 axles are LOCKED together the whole time weather you’re going straight, turning or standing still. Then there are selectable lockers ( ARB,OX, ECTED) which can be open diff one minute and a locked the next via some sort or selector (air, cable or electronic) ---
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [August 22, 2007, 1:10pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/11 "2007-08-22T13:10:43Z")
[quote=“97FormulaWS-6,post:9,topic:34257"”] … snip… [/quote] :tup: Exactly right. And you don’t want a locker unless you’re doing serious off roading. A good posi/limited slip will work much better on the street. ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [August 22, 2007, 1:12pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/12 "2007-08-22T13:12:13Z")
[quote=“sedlmeier101"”] either a limited slip or a **locker**. I want something **very aggresive**. [/quote] that is why i said locker. edit. and installing one just so you can do burn outs… lame. keep it stock and drive it. ---
**Author:** ![97FormulaWS-6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/97formulaws-6/32/7384_2.png) [@97FormulaWS-6](https://forums.speedlife.net/u/97FormulaWS-6)\ **Post date:** [August 22, 2007, 2:18pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/13 "2007-08-22T14:18:10Z")
The air lockers are cool if you’re looking to do some off roading but still keep it nice on the street. Putting a non-remote locker in (Detroit Locker) is pretty extreme and they are not only NOISY when they unlock, but violent as well; I’ve driven cars with DL’s in them and it’s a almost as bad as driving with a spool just more “BANG BANG” as the face gears lock and unlock. Limited slip even for everyday driving is not a bad thing, and I’d invest in one as well with a truck. Hell, my '98 Blazer has one in it so I’m kinda surprised that your 2500 doesn’t. ---
**Author:** ![snowracer101](https://avatars.discourse-cdn.com/v4/letter/s/258eb7/32.png) [@snowracer101](https://forums.speedlife.net/u/snowracer101)\ **Post date:** [August 22, 2007, 2:52pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/14 "2007-08-22T14:52:29Z")
[quote=“Anonymity,post:12,topic:34257"”] that is why i said locker. edit. and installing one just so you can do burn outs… lame. keep it stock and drive it. [/quote] Did I say that? It will help a lot in the winter… also it gets quite annoying spinning the inside tire anytime I try and take off fast around a corner ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [August 22, 2007, 3:23pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/15 "2007-08-22T15:23:39Z")
[quote=“sedlmeier101"”] I have a 03 dodge ram 2500 with the cummins diesel in it. As of right now, it has a open rear diff. which, with the banks six gun, the **truck pulls one wheel peels like you wouldn’t believe.** where should I call to get a limited slip installed. either a limited slip or a locker. I want something very aggresive. I called jiim deans and they don’t do rear end work. any suggestions? [/quote] . please just leave it stock and learn how to drive. i have had one for 3 years. once again just keep it stock and drive it. ---
**Author:** ![66impalass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/66impalass/32/7429_2.png) [@66impalass](https://forums.speedlife.net/u/66impalass)\ **Post date:** [August 22, 2007, 3:32pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/16 "2007-08-22T15:32:58Z")
[quote=“sedlmeier101,post:14,topic:34257"”] Did I say that? It will help a lot in the winter… also it gets quite annoying spinning the inside tire anytime I try and take off fast around a corner [/quote] A locker would not help anymore in the winter, learn to drive… ---
**Author:** ![travisn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/travisn/32/5046_2.png) [@travisn](https://forums.speedlife.net/u/travisn)\ **Post date:** [August 22, 2007, 3:41pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/17 "2007-08-22T15:41:08Z")
yea but what about for plowing, etc? ---
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [August 22, 2007, 3:58pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/18 "2007-08-22T15:58:50Z")
[quote=“66impalass,post:16,topic:34257"”] It would not help anymore in the winter, learn to drive… [/quote] Uh, yeah it would. I had an open diff ranger and it was useless. I’d much rather fishtail and have forward momentum than go nowhere because my one wheel with the least traction is spinning. ---
**Author:** ![66impalass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/66impalass/32/7429_2.png) [@66impalass](https://forums.speedlife.net/u/66impalass)\ **Post date:** [August 22, 2007, 4:01pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/19 "2007-08-22T16:01:10Z")
[quote=“JayS,post:18,topic:34257"”] Uh, yeah it would. I had an open diff ranger and it was useless. I’d much rather fishtail and have forward momentum than go nowhere because my one wheel with the least traction is spinning. [/quote] A LSD/Posi would help in the snow, a locker will not, it will probably cause worse situations especially with the non smooth loading and unloading of the axels. EDIT: Fixed my post to better represent what I ment ---
**Author:** ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)\ **Post date:** [August 22, 2007, 4:09pm UTC](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257/20 "2007-08-22T16:09:31Z")
[quote=“JayS,post:18,topic:34257"”] Uh, yeah it would. I had an open diff ranger and it was useless. I’d much rather fishtail and have forward momentum than go nowhere because my one wheel with the least traction is spinning. [/quote] ok, in the ranger, but my f350 never, never had a problem. plowing, driving, and it was on the dyno at ~750 ft-lb (not a butt dyno). if he is having a problem with the wheels spinning, and not getting the MPG’s he wants, he should not press the skinny little pedal as hard. a locker is not going to cure is problem… the only thing that will cure this problem is the thing that applies the input. [Next page](https://forums.speedlife.net/t/looking-for-a-place-that-will-install-a-lsd/34257.md?page=2)