# Looking for an FMIC **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [July 17, 2006, 5:37pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719 "2006-07-17T17:37:26Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![djdstar](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/djdstar/32/7617_2.png) [@djdstar](https://forums.speedlife.net/u/djdstar)\ **Post date:** [July 17, 2006, 5:37pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/1 "2006-07-17T17:37:26Z")
I’d like one that’s about 18"x7"x3", possibly longer (for the whole assembly). I’m concerned that it is a quality unit and will not blow holes in it if a rock touches it 🙂 Any thoughts where I could look? Seems like most assemblies are 3.25"-3.5" deep. ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [July 17, 2006, 5:55pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/2 "2006-07-17T17:55:02Z")
i would buy a bell core, and have hybrid throw some nice endtanks on it for ya. cheapest way to get a quality intercooler…ask viper966…his withstood a pretty good fight with a blownout semi tire…i know, that FMIC is what is on MY car NOW lol. no leaks ---
**Author:** ![jrex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrex/32/7232_2.png) [@jrex](https://forums.speedlife.net/u/jrex)\ **Post date:** [July 17, 2006, 6:04pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/3 "2006-07-17T18:04:46Z")
Precision 350hp core. 26 x 6 x 3.5. Bar & Plate w/ endtanks, are you limited on space with the depth requirement? ---
**Author:** ![Boarderx192](https://avatars.discourse-cdn.com/v4/letter/b/b782af/32.png) [@Boarderx192](https://forums.speedlife.net/u/Boarderx192)\ **Post date:** [July 17, 2006, 9:24pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/4 "2006-07-17T21:24:35Z")
Yea, I can’t go past 3" easily ☹ If I’m gonna have to spend more than like 350, I’ll prolly order a 3.25" and do a little trimming. ---
**Author:** ![Boarderx192](https://avatars.discourse-cdn.com/v4/letter/b/b782af/32.png) [@Boarderx192](https://forums.speedlife.net/u/Boarderx192)\ **Post date:** [July 18, 2006, 8:43am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/5 "2006-07-18T08:43:34Z")
Yes he is imited on space. The ideal size that hes looking for I believe is 18x6x2.5 ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [July 18, 2006, 9:28am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/6 "2006-07-18T09:28:43Z")
my bell intercooler core took the full brunt of the truck tire at 60 mph and is still good… any bar and plate core could almost take a bullet with the way they are built so that should be something to look at as well ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [July 18, 2006, 9:45am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/7 "2006-07-18T09:45:06Z")
why dont you talk to your boy matt? or is he too busy? ---
**Author:** ![95civiclx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95civiclx/32/7343_2.png) [@95civiclx](https://forums.speedlife.net/u/95civiclx)\ **Post date:** [August 15, 2006, 1:22pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/8 "2006-08-15T13:22:45Z")
i ran one from [customcoachofamerica.com](http://customcoachofamerica.com) i think their website is down but it was like $160 shipped. it would probably be better if you could get one custom made to your application. but these are high quality and cheap. (modine cores, i think) ---
**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\ **Post date:** [August 15, 2006, 1:30pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/9 "2006-08-15T13:30:40Z")
> [@Viper966](#): > > my bell intercooler core took the full brunt of the truck tire at 60 mph and is still good… most definantly survived with amazingly litle damage and then after Nick bought it for the focus, i set it on the floor, shimmed 2 of the corners, set the front tire of the focus on the 3rd corner, and STOMPED on the 4th corner as hard as possible like 8 times to striaghten it that bitch was tuff as nails :tup: ---
**Author:** ![SR20drftSX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sr20drftsx/32/4969_2.png) [@SR20drftSX](https://forums.speedlife.net/u/SR20drftSX)\ **Post date:** [October 2, 2006, 8:49am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/10 "2006-10-02T08:49:13Z")
go to ebay and get an SSauto chrome one…they are good , cheap and reliable…and look sick…good luck ---
**Author:** ![auttiquattro](https://avatars.discourse-cdn.com/v4/letter/a/53a042/32.png) [@auttiquattro](https://forums.speedlife.net/u/auttiquattro)\ **Post date:** [October 2, 2006, 9:47am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/11 "2006-10-02T09:47:38Z")
> [@SR20drftSX](#): > > go to ebay and get an SSauto chrome one…they are good , cheap and reliable…and look sick…good luck Is that a joke? ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [October 2, 2006, 9:55am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/12 "2006-10-02T09:55:28Z")
their intercoolers arent half back. they copied the precision intercoolers. ---
**Author:** ![jrex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrex/32/7232_2.png) [@jrex](https://forums.speedlife.net/u/jrex)\ **Post date:** [October 2, 2006, 10:45am UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/13 "2006-10-02T10:45:54Z")
We can get Garrett Bar & Plate Cores (just the core, no endtanks). We can make endtanks for them if you needed as well. 18 x 6.3 x 3 = $155 18 x 8 x 3 = $230 22 x 8 x 2.3 = $179 ---
**Author:** ![djdstar](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/djdstar/32/7617_2.png) [@djdstar](https://forums.speedlife.net/u/djdstar)\ **Post date:** [October 2, 2006, 12:16pm UTC](https://forums.speedlife.net/t/looking-for-an-fmic/14719/14 "2006-10-02T12:16:23Z")
> [@SR20drftSX](#): > > go to ebay and get an SSauto chrome one…they are good , cheap and reliable…and look sick…good luck they look siqqqq?