# Looking for mandrel bent custom exhaust **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [November 29, 2003, 5:52pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813 "2003-11-29T17:52:20Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [November 29, 2003, 5:52pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/1 "2003-11-29T17:52:20Z")
I’m looking for a shop preferably in the south hills area who can custom mandrel bend me a cat back. Does anyone know of such a place?😕 ---
**Author:** ![whitey](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/whitey/32/5911_2.png) [@whitey](https://forums.speedlife.net/u/whitey)\ **Post date:** [November 29, 2003, 9:44pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/2 "2003-11-29T21:44:13Z")
Red Line, but it is in the North Hills ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [November 30, 2003, 5:52am UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/3 "2003-11-30T05:52:09Z")
Have you worked with Red Line in the past? If so, how much additional expense do you tend to incur with mandrel bent pipe? ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [November 30, 2003, 2:54pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/4 "2003-11-30T14:54:01Z")
A. Redline is a very good shop that I have used a lot in the past, very reputable. B. They don’t have a “mandrel bender”, they use a pusher bender or simply and exhaust bender that pushes the pipe into the jig instead of the jig pushing the pipe on the outside…for exhaust, just get it bent up, your not going to notice a difference. ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [November 30, 2003, 3:03pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/5 "2003-11-30T15:03:42Z")
> _Originally posted by Zook_ > **Have you worked with Red Line in the past? If so, how much additional expense do you tend to incur with mandrel bent pipe?** look at it this way: we do not on " pittspeed " refer to Ripoff Places or direct you in the wrong way. ---
**Author:** ![Streetnstrip](https://avatars.discourse-cdn.com/v4/letter/s/7bcc69/32.png) [@Streetnstrip](https://forums.speedlife.net/u/Streetnstrip)\ **Post date:** [November 30, 2003, 3:16pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/6 "2003-11-30T15:16:12Z")
yeah what he said:bigthumb: ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 1, 2003, 3:04pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/7 "2003-12-01T15:04:44Z")
Nuff said ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 1, 2003, 5:51pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/8 "2003-12-01T17:51:23Z")
As long as it’s not an ugly crush style bend, I’ll be satisfied. I understand the mandrel bend(using an insert), but I don’t quite understand the difference between the two process described above. And as far as noticing a difference, perhaps you’re right. But why settle for substandard work. I have a little 4 banger with a little pipe. Extra resistance is more problematic in this situation than it would be with big duals on a V8. If I do it the way I want it I refuse to compromise quality for the extra money it takes to do it right ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [December 1, 2003, 8:11pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/9 "2003-12-01T20:11:42Z")
> _Originally posted by Zook_ > **As long as it’s not an ugly crush style bend, I’ll be satisfied. I understand the mandrel bend(using an insert), but I don’t quite understand the difference between the two process described above. And as far as noticing a difference, perhaps you’re right. But why settle for substandard work. I have a little 4 banger with a little pipe. Extra resistance is more problematic in this situation than it would be with big duals on a V8. If I do it the way I want it I refuse to compromise quality for the extra money it takes to do it right** yeah i hear yah on the qaulity. But get one thing straight 😉 Only the Mustang Owners have True Duals. Then shop around, they simply suggested it:tounge: ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 2, 2003, 2:25pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/10 "2003-12-02T14:25:35Z")
You can put duals on an F-body, but you could lose one over a speed bump. I don’t know 4th gen, I had a 92. But it is difficult. At least the Mustang gets the better sounding exhaust, if it wasn’t for that it’d have nothing going for it over the Camarochicken. And girls dig the jellybean styling. ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [December 2, 2003, 2:32pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/11 "2003-12-02T14:32:36Z")
my girl says Space mobile :tounge: ---
**Author:** ![imported\_showtime](https://avatars.discourse-cdn.com/v4/letter/i/51bf81/32.png) [@imported\_showtime](https://forums.speedlife.net/u/imported_showtime)\ **Post date:** [December 3, 2003, 7:13am UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/12 "2003-12-03T07:13:54Z")
> _Originally posted by gearhead_ > **A. Redline is a very good shop that I have used a lot in the past, very reputable.** x2 Jay uses them all the time…i had an exhaust put on my wifes car there…very nice work. ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 3, 2003, 4:19pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/13 "2003-12-03T16:19:25Z")
Where have I seen that Contour before? And the avatar?Another forum, perhaps? Don’t you have another, perhaps smaller car as well? ---
**Author:** ![imported\_showtime](https://avatars.discourse-cdn.com/v4/letter/i/51bf81/32.png) [@imported\_showtime](https://forums.speedlife.net/u/imported_showtime)\ **Post date:** [December 4, 2003, 6:07am UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/14 "2003-12-04T06:07:11Z")
> _Originally posted by Zook_ > **Where have I seen that Contour before? And the avatar?Another forum, perhaps? Don’t you have another, perhaps smaller car as well?** your talking about my wifes car. snd yeah…i’m on SAF. ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 4, 2003, 12:43pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/15 "2003-12-04T12:43:51Z")
What did they put on her car(setup) ---
**Author:** ![imported\_showtime](https://avatars.discourse-cdn.com/v4/letter/i/51bf81/32.png) [@imported\_showtime](https://forums.speedlife.net/u/imported_showtime)\ **Post date:** [December 4, 2003, 1:22pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/16 "2003-12-04T13:22:49Z")
2.25" cat back with no res, straight through N1 stlye muffler ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 12, 2003, 3:02pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/17 "2003-12-12T15:02:45Z")
Where are the sound levels? And do you get a resonant hum around 3K, or does it stay outside for the most part? ---
**Author:** ![Darkstar](https://avatars.discourse-cdn.com/v4/letter/d/b487fb/32.png) [@Darkstar](https://forums.speedlife.net/u/Darkstar)\ **Post date:** [December 12, 2003, 3:52pm UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/18 "2003-12-12T15:52:07Z")
> _Originally posted by Zook_ > **I have a little 4 banger with a little pipe. Extra resistance is more problematic in this situation than it would be with big duals on a V8. If I do it the way I want it I refuse to compromise quality for the extra money it takes to do it right** actually, i would think that it would be the other way around. As long as were talking actualy losses/gains, and not percentages. Either way, unless you are gonna do more than the simple IHE, you wont really notice a power difference betwen mandrel and Redlines method… you probably wouldnt be able to tell the difference between stock and aftermarket, i couldnt when i put a 2.25 thermal catback and a test pipe on my h23 lude… ---
**Author:** ![Zook](https://avatars.discourse-cdn.com/v4/letter/z/9fc29f/32.png) [@Zook](https://forums.speedlife.net/u/Zook)\ **Post date:** [December 13, 2003, 5:58am UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/19 "2003-12-13T05:58:19Z")
It’s not my intention to use conventional mufflers. The setup I’m planning is fairly different, the routing is different, and my car will lose 40lbs in addition to what power gains I may or may not get. That’s going to be a bigger difference that 3-4hp will give me, but I’m removing 2 muffler bodies and 3ft of piping and the new body only weighs 4 lbs, although the pipework should be equal in weight, the two stock bodies are extremely heavy. Cat #2 and the big muffler go away, and since I’m not using a (heavy)fart can in place of the stock exhaust I can reduce weight significantly. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [December 13, 2003, 10:08am UTC](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813/20 "2003-12-13T10:08:28Z")
Too bad i don’t have any titanium exhaust pieces left :dunno: [Next page](https://forums.speedlife.net/t/looking-for-mandrel-bent-custom-exhaust/162813.md?page=2)