# Looking for: Pipe Bead Rolling **URL:** \ **Category:** SON240sx Automotive\ **Created:** [September 16, 2010, 1:38pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446 "2010-09-16T13:38:07Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)\ **Post date:** [September 16, 2010, 1:38pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/1 "2010-09-16T13:38:07Z")
I’m looking for the service of getting a bead rolled into the front mount intercooler piping that I’ve fabricated. I’ve yet to find a location online and I am trying to explore all options until I have to visit individual locations. If anyone knows a shop which does this at a decent/competitive price, please do let me know. I searched and referenced Minute Muffler on St.Clair. I went to their location today and they didn’t know what a Bead Roller was… Cheers - Billy ---
**Author:** ![Philly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/philly/32/5748_2.png) [@Philly](https://forums.speedlife.net/u/Philly)\ **Post date:** [September 16, 2010, 4:31pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/2 "2010-09-16T16:31:56Z")
Weirtech ---
**Author:** ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)\ **Post date:** [September 17, 2010, 5:08am UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/3 "2010-09-17T05:08:15Z")
Thanks. I will contact them and ask for a quotation. Are there any other locations that can be recommended closer to Toronto? Gord Bush Recommended Ultimate Racing in scarborough. ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [September 17, 2010, 7:56am UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/4 "2010-09-17T07:56:42Z")
Your wanting to put a rolled edge ont he edge of the piping to ensure the couplers dont slide? Why not weld a bead arount the lip of the pipe? :S ---
**Author:** ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)\ **Post date:** [September 17, 2010, 8:41am UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/5 "2010-09-17T08:41:49Z")
Thanks for your suggestion. The aluminum material is thin. I do not want to risk the opportunity of puncturing the material. Due to the fact that I did not have a bead rolled, some of the piping crumpled, so I need to get it straightened back anyways. I contacted Weirtech and they are willing to do it for nearly half the price of the local GTA location that I found, Yoshio @ Japanese Automotive ---
**Author:** ![derass](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/derass/32/5691_2.png) [@derass](https://forums.speedlife.net/u/derass)\ **Post date:** [September 17, 2010, 10:46am UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/6 "2010-09-17T10:46:43Z")
any sheetmetal shop (HVAC Ducting) will have a bead roller ---
**Author:** ![Pants](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pants/32/5590_2.png) [@Pants](https://forums.speedlife.net/u/Pants)\ **Post date:** [September 17, 2010, 7:16pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/7 "2010-09-17T19:16:24Z")
pm me my shop does it ---
**Author:** ![izzo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/izzo/32/5769_2.png) [@izzo](https://forums.speedlife.net/u/izzo)\ **Post date:** [September 17, 2010, 8:20pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/8 "2010-09-17T20:20:19Z")
call corps… he builds submarin, boats… and used to weld / build my stunt bike. no. 1 aluminum welder imo. ---
**Author:** ![RB240Z](https://avatars.discourse-cdn.com/v4/letter/r/47e85d/32.png) [@RB240Z](https://forums.speedlife.net/u/RB240Z)\ **Post date:** [September 17, 2010, 8:37pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/9 "2010-09-17T20:37:02Z")
If u don’t mind doing some hands on work check this DIY…[http://community.ratsun.net/topic/21337-how-to-bead-your-own-intercooler-pipes/](http://community.ratsun.net/topic/21337-how-to-bead-your-own-intercooler-pipes/) ---
**Author:** ![Acidz](https://avatars.discourse-cdn.com/v4/letter/a/dbc845/32.png) [@Acidz](https://forums.speedlife.net/u/Acidz)\ **Post date:** [September 23, 2010, 12:42pm UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/10 "2010-09-23T12:42:13Z")
i have a bead roller 😉 ---
**Author:** ![drunkmunky](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)\ **Post date:** [November 6, 2010, 7:04am UTC](https://forums.speedlife.net/t/looking-for-pipe-bead-rolling/160446/11 "2010-11-06T07:04:58Z")
I ended up going to Aaron Weir @ Weirtech in Burlington Thanks guys