# Looking for place to install 2 way and driveshaft

**URL:** <https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730>\
**Category:** SON240sx Automotive\
**Created:** [July 29, 2009, 8:47pm UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730 "2009-07-29T20:47:11Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\
**Post date:** [July 29, 2009, 8:47pm UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/1 "2009-07-29T20:47:11Z")

</div>

Looking for a place that can install my 2 way into the housing, properly. By checking the gear mesh and the backlash and all that.

Also looking for a place to make me a solid one piece aluminum drive shaft, because its becoming impossible to find myself a nice stock one. So I’d rather get a custom one made.

Also does anyone know where to get the compression fitting for a boost gauge pipe, i believe its 1/16 to 1/8, and cdn tire and home depot don’t’ carry fittings that small.

---

<div class="post-metadata">

**Author:** ![jeff93eg](https://avatars.discourse-cdn.com/v4/letter/j/58956e/32.png) [@jeff93eg](https://forums.speedlife.net/u/jeff93eg)\
**Post date:** [August 7, 2009, 4:42pm UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/2 "2009-08-07T16:42:41Z")

</div>

brofasco?

---

<div class="post-metadata">

**Author:** ![corpse](https://avatars.discourse-cdn.com/v4/letter/c/ed655f/32.png) [@corpse](https://forums.speedlife.net/u/corpse)\
**Post date:** [August 8, 2009, 12:21am UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/3 "2009-08-08T00:21:24Z")

</div>

“brafasco” incase you wanna look em up

---

<div class="post-metadata">

**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\
**Post date:** [August 8, 2009, 2:51am UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/4 "2009-08-08T02:51:17Z")

</div>

Oh, i got the fitting from a autometer distributor.

Anyone know where i can get my LSD installed or atleast buy a proper dial indicator.

---

<div class="post-metadata">

**Author:** ![555](https://avatars.discourse-cdn.com/v4/letter/5/e9a140/32.png) [@555](https://forums.speedlife.net/u/555)\
**Post date:** [August 8, 2009, 6:18am UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/5 "2009-08-08T06:18:45Z")

</div>

Try Euro-drive clutches in Burlington. They can make you a drive shaft, or at least point you in the right direction. [info@euro-drive.com](mailto:info@euro-drive.com)

Adam

---

<div class="post-metadata">

**Author:** ![draggone](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@draggone](https://forums.speedlife.net/u/draggone)\
**Post date:** [August 8, 2009, 8:34am UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/6 "2009-08-08T08:34:00Z")

</div>

call me or the shop416-916-2487 ask for me or tony. I can make you a drive shaft, did one on the 1jz 240 for a customer.

---

<div class="post-metadata">

**Author:** ![240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/240sx/32/5592_2.png) [@240sx](https://forums.speedlife.net/u/240sx)\
**Post date:** [August 8, 2009, 1:37pm UTC](https://forums.speedlife.net/t/looking-for-place-to-install-2-way-and-driveshaft/126730/7 "2009-08-08T13:37:45Z")

</div>

.