# looking for some one to build my engine **URL:** \ **Category:** Shift518 Automotive\ **Created:** [July 16, 2010, 11:34am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293 "2010-07-16T11:34:37Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![low\_n\_slow](https://avatars.discourse-cdn.com/v4/letter/l/7bcc69/32.png) [@low\_n\_slow](https://forums.speedlife.net/u/low_n_slow)\ **Post date:** [July 16, 2010, 11:34am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/1 "2010-07-16T11:34:37Z")
looking for someone that would assemble my engine for me. or someone on here lookin for some extra cash. its a b18c1. all machine work has been done. all parts are their and ready to go. i talked to couple local shops and they charge too much. any recomendations will be very appreciated. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 16, 2010, 11:42am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/2 "2010-07-16T11:42:43Z")
> [@FS: Dave and Busters card](https://forums.speedlife.net/t/fs-dave-and-busters-card/33513/11): > > looking for someone that would assemble my engine for me. or someone on here lookin for some extra cash. its a b18c1. all machine work has been done. all parts are their and ready to go. i talked to couple local shops and they charge too much. any recomendations will be very appreciated. How much is too much? Boyd’s motorworks in Gloversville built my bottom end. Dropped off the stck bottom end, new pistons, rods, bearings and main seals. $500 later I picked up the bottom end put together. That included, stipping the old parts out. cleaning. boreing the block. correctly gapping the rings, and putting everything else back together and tq’d to spec. Cant beat all that work for $500 and peace of mind it was done right. he builds 1500+hp v8’s there for some serious cars and big boats, and has been around for ever. Money well spent IMO. ---
**Author:** ![low\_n\_slow](https://avatars.discourse-cdn.com/v4/letter/l/7bcc69/32.png) [@low\_n\_slow](https://forums.speedlife.net/u/low_n_slow)\ **Post date:** [July 16, 2010, 11:44am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/3 "2010-07-16T11:44:21Z")
thats not bad at all actually. whats their number?? ---
**Author:** ![Baumbauer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baumbauer/32/6530_2.png) [@Baumbauer](https://forums.speedlife.net/u/Baumbauer)\ **Post date:** [July 16, 2010, 11:50am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/4 "2010-07-16T11:50:15Z")
725-6089 ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [July 16, 2010, 12:18pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/5 "2010-07-16T12:18:44Z")
Build it yourself. ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 16, 2010, 12:47pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/6 "2010-07-16T12:47:56Z")
> [@FS:92 Honda Civic DX (650whp)](https://forums.speedlife.net/t/fs-92-honda-civic-dx-650whp/33449/56): > > Build it yourself. exactly! get the OEM tolerances for it, get some plasti-gage, feeler gages, assembly lube a GOOD Torque wrench(not harbor freight) and get to work. ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [July 16, 2010, 1:28pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/7 "2010-07-16T13:28:02Z")
I hear noboost35r can build it for you, he also specializes in wiring harness work ---
**Author:** ![downforlow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/downforlow/32/6595_2.png) [@downforlow](https://forums.speedlife.net/u/downforlow)\ **Post date:** [July 16, 2010, 1:41pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/8 "2010-07-16T13:41:55Z")
I just rebuilt my D16Z6’s top end. I’m no expert but I’m patient and meticulous. I have a shop and plenty of time right now, plus all the necessary tools and know how. ---
**Author:** ![noboost35r](https://avatars.discourse-cdn.com/v4/letter/n/77aa72/32.png) [@noboost35r](https://forums.speedlife.net/u/noboost35r)\ **Post date:** [July 16, 2010, 5:28pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/9 "2010-07-16T17:28:29Z")
> [@I \<3 CRX project](https://forums.speedlife.net/t/i-3-crx-project/33098/38): > > I hear noboost35r can build it for you, he also specializes in wiring harness work Get off my Dick. And grow up. :retardclap ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [July 16, 2010, 5:37pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/10 "2010-07-16T17:37:06Z")
screwdriver ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [July 16, 2010, 5:55pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/11 "2010-07-16T17:55:41Z")
> [@I \<3 CRX project](https://forums.speedlife.net/t/i-3-crx-project/33098/38): > > I hear noboost35r can build it for you, he also specializes in wiring harness work if thats what you call bomb making and other terrorist activities ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [July 16, 2010, 8:06pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/12 "2010-07-16T20:06:12Z")
call seamus or pm him his name on here is tougethisdb1 or suttin like that ---
**Author:** ![tougethisDB1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tougethisdb1/32/6358_2.png) [@tougethisDB1](https://forums.speedlife.net/u/tougethisDB1)\ **Post date:** [July 16, 2010, 8:22pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/13 "2010-07-16T20:22:57Z")
i could do it for you. pm me ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [July 16, 2010, 8:31pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/14 "2010-07-16T20:31:41Z")
Oh, noboost is the screwdriver guy? Can someone put a bell on him or something. geez. ---
**Author:** ![tougethisDB1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tougethisdb1/32/6358_2.png) [@tougethisDB1](https://forums.speedlife.net/u/tougethisDB1)\ **Post date:** [July 16, 2010, 8:39pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/15 "2010-07-16T20:39:38Z")
> [@School me on bikes](https://forums.speedlife.net/t/school-me-on-bikes/33534/16): > > **Can someone put a bell on him or something.** geez. HAHAHAHAHA:number1 ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [July 16, 2010, 8:41pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/16 "2010-07-16T20:41:10Z")
oh boy ---
**Author:** ![Cliff](https://avatars.discourse-cdn.com/v4/letter/c/b38774/32.png) [@Cliff](https://forums.speedlife.net/u/Cliff)\ **Post date:** [July 16, 2010, 9:19pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/17 "2010-07-16T21:19:36Z")
Get ahold of Joe Jiggs. Joe Jiggs is the man. ---
**Author:** ![imported\_hybrdthry91](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_hybrdthry91/32/6315_2.png) [@imported\_hybrdthry91](https://forums.speedlife.net/u/imported_hybrdthry91)\ **Post date:** [July 16, 2010, 11:29pm UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/18 "2010-07-16T23:29:26Z")
what machine work is done and by who, and what parts are you putting in this b18? ---
**Author:** ![K20power](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@K20power](https://forums.speedlife.net/u/K20power)\ **Post date:** [July 17, 2010, 12:37am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/19 "2010-07-17T00:37:03Z")
holler at Joe JIggs if you want it to last ---
**Author:** ![big\_red](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/big_red/32/6328_2.png) [@big\_red](https://forums.speedlife.net/u/big_red)\ **Post date:** [July 17, 2010, 6:18am UTC](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293/20 "2010-07-17T06:18:37Z")
> [@School me on bikes](https://forums.speedlife.net/t/school-me-on-bikes/33534/16): > > Oh, noboost is the screwdriver guy? Can someone put a bell on him or something. geez. LOL [Next page](https://forums.speedlife.net/t/looking-for-some-one-to-build-my-engine/253293.md?page=2)