# Looking for someone to fabricate a set of headers **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [June 3, 2008, 1:05pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483 "2008-06-03T13:05:37Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![bracketracer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bracketracer/32/15592_2.png) [@bracketracer](https://forums.speedlife.net/u/bracketracer)\ **Post date:** [June 3, 2008, 1:05pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/1 "2008-06-03T13:05:37Z")
Can’t say a whole lot about this other than the following: 1. has to be completely, perfect, first-class work 2. I do have the flanges (Brodix BD2000 heads) 3. money is not a big issue 4. I will need said person to come by here to see what’s needed 5. doesn’t need to be immediate (6 weeks out is ok) ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [June 3, 2008, 1:10pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/2 "2008-06-03T13:10:48Z")
lowlyoilburner. some of the best welds I’ve seen, on here at least. old link: [http://nyspeed.com/forums/showthread.php?t=16992&highlight=lowlyoilburner](http://nyspeed.com/forums/showthread.php?t=16992&highlight=lowlyoilburner) ---
**Author:** ![bracketracer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bracketracer/32/15592_2.png) [@bracketracer](https://forums.speedlife.net/u/bracketracer)\ **Post date:** [June 3, 2008, 1:13pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/3 "2008-06-03T13:13:21Z")
cool. I know Matt. Didn’t realize that he did this sort of thing as well. ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [June 3, 2008, 2:09pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/4 "2008-06-03T14:09:12Z")
> [@Nikuk](#): > > lowlyoilburner. some of the best welds I’ve seen, on here at least. > > old link: [http://nyspeed.com/forums/showthread.php?t=16992&highlight=lowlyoilburner](http://nyspeed.com/forums/showthread.php?t=16992&highlight=lowlyoilburner) there you go ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [June 3, 2008, 2:11pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/5 "2008-06-03T14:11:31Z")
Matt would probably weld it. However hate you forever if you ask him to mock it up. I would ask Gary (devioustsi) to do it then have matt weld it. ---
**Author:** ![RuBiCaNT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rubicant/32/7622_2.png) [@RuBiCaNT](https://forums.speedlife.net/u/RuBiCaNT)\ **Post date:** [June 3, 2008, 2:12pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/6 "2008-06-03T14:12:37Z")
I can vouch for Matt’s work too. He’s top notch. You might want to give Lee a (JohnnyMontrose) a call too. PM for his number. Lee is an outstanding welder as well. ---
**Author:** ![BDR5oh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bdr5oh/32/7315_2.png) [@BDR5oh](https://forums.speedlife.net/u/BDR5oh)\ **Post date:** [June 3, 2008, 2:16pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/7 "2008-06-03T14:16:15Z")
Wizards cooling … ---
**Author:** ![Pauly](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pauly/32/7493_2.png) [@Pauly](https://forums.speedlife.net/u/Pauly)\ **Post date:** [June 3, 2008, 2:36pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/8 "2008-06-03T14:36:31Z")
Did you call Oddy’s or jancen? they can probally point you in the right direction. The stuff Jason needs HAS to be perfect, not the job for joe average fabricator ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [June 3, 2008, 3:19pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/9 "2008-06-03T15:19:19Z")
matt welded me a turbo mani and ic pipeing.every piece of it it top notch ---
**Author:** ![bracketracer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bracketracer/32/15592_2.png) [@bracketracer](https://forums.speedlife.net/u/bracketracer)\ **Post date:** [June 3, 2008, 4:10pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/10 "2008-06-03T16:10:17Z")
> [@Pauly](#): > > Did you call Oddy’s or jancen? > they can probally point you in the right direction. The stuff Jason needs HAS to be perfect, not the job for joe average fabricator not yet…they’re on the list though from when we last spoke. ---
**Author:** ![Oroc](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@Oroc](https://forums.speedlife.net/u/Oroc)\ **Post date:** [June 3, 2008, 4:15pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/11 "2008-06-03T16:15:01Z")
Vito Antonicelli does headers, all tig welded very nice. Dont know what his work load is like but its worth a call to find out when u can get in there ---
**Author:** ![EvilJay](https://avatars.discourse-cdn.com/v4/letter/e/a5b964/32.png) [@EvilJay](https://forums.speedlife.net/u/EvilJay)\ **Post date:** [June 3, 2008, 5:01pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/12 "2008-06-03T17:01:54Z")
Matt sucks. ---
**Author:** ![Smaefer](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@Smaefer](https://forums.speedlife.net/u/Smaefer)\ **Post date:** [June 3, 2008, 6:03pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/13 "2008-06-03T18:03:43Z")
Matt does not do this shit anymore… ---
**Author:** ![Firehawk853](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/firehawk853/32/7607_2.png) [@Firehawk853](https://forums.speedlife.net/u/Firehawk853)\ **Post date:** [June 3, 2008, 7:06pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/14 "2008-06-03T19:06:59Z")
> [@Oroc](#): > > Vito Antonicelli does headers, all tig welded very nice. Dont know what his work load is like but its worth a call to find out when u can get in there Jason Vitez Race Car also builds custom headers, TIG’d, jethot coated PM me for his phone number his shop is located in Elma, NY ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [June 3, 2008, 8:16pm UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/15 "2008-06-03T20:16:03Z")
Randy Jewell [http://www.rjprofab.com](http://www.rjprofab.com) Some work pics [http://rjprofab.smugmug.com/](http://rjprofab.smugmug.com/) [http://rjprofab.smugmug.com/gallery/4266167\_bEEsV#249822370\_e7Uat](http://rjprofab.smugmug.com/gallery/4266167_bEEsV#249822370_e7Uat) Top work in the country. Did a custom 4130 rollbar w/ swing outs for a turbo GTO we did. There was a artical in FSC (fastest street car) a few months ago. ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [June 4, 2008, 5:27am UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/16 "2008-06-04T05:27:59Z")
who did joestypes’ header for the integra? PM him ---
**Author:** ![bracketracer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bracketracer/32/15592_2.png) [@bracketracer](https://forums.speedlife.net/u/bracketracer)\ **Post date:** [June 4, 2008, 6:18am UTC](https://forums.speedlife.net/t/looking-for-someone-to-fabricate-a-set-of-headers/49483/17 "2008-06-04T06:18:30Z")
Ok…wow…yeah, looks like there’s a number of quality fab shops/people out there. I really appreciate the recos!