# Low Partrol - Air Ride + Full Build On Undercover Cop Cruiser **URL:** \ **Category:** Builds\ **Created:** [January 19, 2011, 11:42am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514 "2011-01-19T11:42:41Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [January 24, 2011, 8:15am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/161 "2011-01-24T08:15:36Z")
:rofl ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [January 24, 2011, 10:32am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/162 "2011-01-24T10:32:00Z")
The only way to do it 100% is with a housing jig… Although I have seen people do it the way your mentioning…Another good DIY way is with round tubing that slides through the housing…It has to be exactly the diameter of the axle opening (for tapered housings) with the tube through the housing you can cut and slide pieces around without messing with the alignment too bad… (not sure if i explained that so you can visualize it) There are also other things to take into account…For cars that are going to be high HP drag style… some people set the axle housings pre loaded for torque… Its twisted and only truely aligned when the foot is down on the gas… > [@Biker Boys - R1 Paintjob](https://forums.speedlife.net/t/biker-boys-r1-paintjob/39049/3): > > How do you usually narrow a rear? I did my first one 2 weekends ago, ford 8.8. We did the math to get the axle tubes the right length we wanted (its an offset dif) then put it on the chop box. made out cuts, beveled and then used 2 pieces of C channel and clamped them together nice and tight to keep it aligned. Tacked it then tacked on some 1/4" plate in 4 places around it standing up to make gussets so heat didnt warp it. Just would like to know how you pull it off and compare strategies. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [January 24, 2011, 11:29am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/163 "2011-01-24T11:29:20Z")
I like the idea of the sleeve too. find the inside dia of the tubes, and lathe down some tube material the right size so it slides in and keeps it all straight. then you can leave the sleeve in too for a little extra strength. ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 17, 2011, 6:20am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/164 "2011-09-17T06:20:32Z")
Since my last post: Vette brakes mocked up Rear end mocked up Rear clip is in the mix I wasn’t going to post pics on here/ continue this build on here but figured since I started I should finish sharing. Things have progressed alot since the last post ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 17, 2011, 6:24am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/165 "2011-09-17T06:24:41Z")
Ca you upload pics from iPhone like Facebook via email/link? ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [September 17, 2011, 8:12am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/166 "2011-09-17T08:12:37Z")
I just f.b em and then copy/paste em here ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [September 17, 2011, 8:36am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/167 "2011-09-17T08:36:41Z")
clair, i upload from my iphone to my FlickR account, and link from there. its very easy. ---
**Author:** ![Singh1](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@Singh1](https://forums.speedlife.net/u/Singh1)\ **Post date:** [September 20, 2011, 5:44am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/168 "2011-09-20T05:44:23Z")
wow, great taste in mods… cant loose with 32’s or whatever the saying is. I say step your game up, more wheel lip, more chrome, more swag, and most of all get that bitch lower and drift it on nyc streets ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [September 20, 2011, 1:46pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/169 "2011-09-20T13:46:40Z")
> [@Singh"](#): > > I say step your game up, more wheel lip, more chrome, more swag, and most of all get that bitch lower and drift it on nyc streets weaving between potholes Fixed ---
**Author:** ![Singh1](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@Singh1](https://forums.speedlife.net/u/Singh1)\ **Post date:** [September 20, 2011, 7:33pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/170 "2011-09-20T19:33:29Z")
i wanna see the fuckin oil pan hitting the ants on the road when u drive by, i wana see big fucking wheels , BIG FUCKIN WHEELS oh YEAH ---
**Author:** ![toolow69](https://avatars.discourse-cdn.com/v4/letter/t/ac91a4/32.png) [@toolow69](https://forums.speedlife.net/u/toolow69)\ **Post date:** [September 20, 2011, 8:40pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/171 "2011-09-20T20:40:06Z")
in for pics!!! ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 8:27am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/172 "2011-09-23T08:27:53Z")
Brake Mock Up ![http://i52.tinypic.com/aax453.png](http://i52.tinypic.com/aax453.png) ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [September 23, 2011, 9:36am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/173 "2011-09-23T09:36:57Z")
Awwww its soo cute ---
**Author:** ![toolow69](https://avatars.discourse-cdn.com/v4/letter/t/ac91a4/32.png) [@toolow69](https://forums.speedlife.net/u/toolow69)\ **Post date:** [September 23, 2011, 11:44am UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/174 "2011-09-23T11:44:43Z")
looks like they fit ---
**Author:** ![JSEnclosures](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsenclosures/32/6678_2.png) [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)\ **Post date:** [September 23, 2011, 12:14pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/175 "2011-09-23T12:14:15Z")
i don’t understand these cars but i appreciate the hard work. I was down in myrtle beach this year for vaca and these things were everywhere, they must have been hundreds of these cars. I swear the rims on these cars were worth more than the cars themselves by atleast 3-4 times ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 12:19pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/176 "2011-09-23T12:19:37Z")
I wanted to make sure the caliper didn’t rub the rim… We pushed the offset really hard when coming up with the design/idea and I forgot to mock the brakes up first (whoops) anyhow we are lucky they fit fine. I will be posting up more pics of the progress soon ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 12:21pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/177 "2011-09-23T12:21:30Z")
Most of the cars i see down there are lifted up… This will be tucking hard > [@FF7 Crysis Core](https://forums.speedlife.net/t/ff7-crysis-core/45619/4): > > i don’t understand these cars but i appreciate the hard work. I was down in myrtle beach this year for vaca and these things were everywhere, they must have been hundreds of these cars. I swear the rims on these cars were worth more than the cars themselves by atleast 3-4 times ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 12:28pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/178 "2011-09-23T12:28:12Z")
> [@FF7 Crysis Core](https://forums.speedlife.net/t/ff7-crysis-core/45619/4): > > i don’t understand these cars but i appreciate the hard work. I was down in myrtle beach this year for vaca and these things were everywhere, they must have been hundreds of these cars. I swear the rims on these cars were worth more than the cars themselves by atleast 3-4 times This is an SS i slammed hard…fully worked with a supercharger…and my 10 year old pit ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 12:29pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/179 "2011-09-23T12:29:08Z")
big pics sorry …lol ---
**Author:** ![ClairFBeeIII](https://avatars.discourse-cdn.com/v4/letter/c/5daacb/32.png) [@ClairFBeeIII](https://forums.speedlife.net/u/ClairFBeeIII)\ **Post date:** [September 23, 2011, 1:15pm UTC](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514/180 "2011-09-23T13:15:45Z")
> [@FF7 Crysis Core](https://forums.speedlife.net/t/ff7-crysis-core/45619/4): > > i don’t understand these cars but i appreciate the hard work. I was down in myrtle beach this year for vaca and these things were everywhere, they must have been hundreds of these cars. I swear the rims on these cars were worth more than the cars themselves by atleast 3-4 times This cost less then one of those tires so yeah I feel ya [Previous page](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514.md?page=8) [Next page](https://forums.speedlife.net/t/low-partrol-air-ride-full-build-on-undercover-cop-cruiser/256514.md?page=10)