# LS1, 4l60E, Pacesetters, Soon 10-bolt **URL:** \ **Category:** Classifieds\ **Created:** [March 14, 2009, 4:46pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502 "2009-03-14T16:46:37Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![bamfer9duce](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@bamfer9duce](https://forums.speedlife.net/u/bamfer9duce)\ **Post date:** [December 25, 2009, 12:53pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/21 "2009-12-25T12:53:40Z")
ryanbgb22 the Trex was never in this motor it still has the stock cam. Good luck with the sale Ned ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 25, 2009, 6:28pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/22 "2009-12-25T18:28:49Z")
> [@ryanbgb22](#): > > What is the condition? Any compression numbers? Is the trans built at all / does it slip? Now that the cam is gone do you have the stock cam to include with the engine? No numbers, and I don’t think you understood that this motor is in full running order, I drove it to the shop, she sounds great. I wouldn’t be apposed to getting some numbers, but have never really had to do anything to it, just change the oil an let the LS1 do its thing. In other words, minus what I take off for my new motor, it is ready to bolt in to another car and I’m sure it could go on and on. Doesn’t eat oil, Doesn’t leave spots on the driveway. Oil pressure is solid. Really to my knowledge, this motor has never even had a valve cover off. That’s why its been so easy waiting for my other motor to be ready to rock, this one has been so great. Shifts good, frequent transmission fluid changes have helped it out. Stock transmission, new filter within the last year. Goes into gear just fine. ---
**Author:** ![boosting4me](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@boosting4me](https://forums.speedlife.net/u/boosting4me)\ **Post date:** [December 25, 2009, 6:51pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/23 "2009-12-25T18:51:05Z")
damn you why did I have to see this hmmmmmmmmmmmmmmmmmm ---
**Author:** ![turbojohnny](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@turbojohnny](https://forums.speedlife.net/u/turbojohnny)\ **Post date:** [December 25, 2009, 6:52pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/24 "2009-12-25T18:52:32Z")
I’m interested in the rearend. will it be intact? brakes and all? ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 25, 2009, 7:13pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/25 "2009-12-25T19:13:40Z")
No I’ll be re-using the brakes, other than that, yes. ---
**Author:** ![turbojohnny](https://avatars.discourse-cdn.com/v4/letter/t/df788c/32.png) [@turbojohnny](https://forums.speedlife.net/u/turbojohnny)\ **Post date:** [December 25, 2009, 7:18pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/26 "2009-12-25T19:18:23Z")
So I can call dibs? I’ll just have to find some calipers and brackets somewhere. ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 25, 2009, 7:20pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/27 "2009-12-25T19:20:53Z")
Sure, I might be able to help you find some cheap too. ---
**Author:** ![ryanbgb22](https://avatars.discourse-cdn.com/v4/letter/r/7feea3/32.png) [@ryanbgb22](https://forums.speedlife.net/u/ryanbgb22)\ **Post date:** [December 25, 2009, 7:32pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/28 "2009-12-25T19:32:21Z")
> [@BigEd88](#): > > No numbers, and I don’t think you understood that this motor is in full running order, I drove it to the shop, she sounds great. I wouldn’t be apposed to getting some numbers, but have never really had to do anything to it, just change the oil an let the LS1 do its thing. > > In other words, minus what I take off for my new motor, it is ready to bolt in to another car and I’m sure it could go on and on. > > Doesn’t eat oil, Doesn’t leave spots on the driveway. Oil pressure is solid. Really to my knowledge, this motor has never even had a valve cover off. > > That’s why its been so easy waiting for my other motor to be ready to rock, this one has been so great. > > Shifts good, frequent transmission fluid changes have helped it out. Stock transmission, new filter within the last year. Goes into gear just fine. Damn, I kinda wish you didnt say that, now I really want it. Let me know if other interest falls through. ---
**Author:** ![stmotorsports](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@stmotorsports](https://forums.speedlife.net/u/stmotorsports)\ **Post date:** [December 25, 2009, 10:10pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/29 "2009-12-25T22:10:46Z")
I might be interested as well ecu included or are you using that with the new setup? rear is 3.42s? ---
**Author:** ![dpm90iroc](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dpm90iroc/32/4966_2.png) [@dpm90iroc](https://forums.speedlife.net/u/dpm90iroc)\ **Post date:** [December 26, 2009, 5:54am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/30 "2009-12-26T05:54:09Z")
Is the high stall convertor still in, & included? ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 26, 2009, 8:13am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/31 "2009-12-26T08:13:13Z")
> [@ryanbgb22](#): > > Damn, I kinda wish you didnt say that, now I really want it. Let me know if other interest falls through. Any previous people interested have failed to get back to me, so if you have the money, its yours. > [@stmotorsports](#): > > I might be interested as well > > ecu included or are you using that with the new setup? > > rear is 3.42s? No harness or computer. Rear has 3.23’s > [@dpm90iroc](#): > > Is the high stall convertor still in, & included? Not at first, but if can’t be tightened enough it will be listed for sale. ---
**Author:** ![9c1ny](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/9c1ny/32/5050_2.png) [@9c1ny](https://forums.speedlife.net/u/9c1ny)\ **Post date:** [December 26, 2009, 3:54pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/32 "2009-12-26T15:54:59Z")
> [@BigEd88](#): > > Any previous people interested have failed to get back to me, so if you have the money, its yours. > > No harness or computer. Rear has 3.23’s > > Not at first, but if can’t be tightened enough it will be listed for sale. I call dibs on the Yank if you cant use it ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [December 26, 2009, 6:00pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/33 "2009-12-26T18:00:23Z")
It’s not A FUCKING YANK ---
**Author:** ![9c1ny](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/9c1ny/32/5050_2.png) [@9c1ny](https://forums.speedlife.net/u/9c1ny)\ **Post date:** [December 26, 2009, 6:42pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/34 "2009-12-26T18:42:42Z")
> [@LZ](#): > > It’s not A FUCKING YANK it was a SS4000 when I had it at least thats what you said, I wasnt aware it had been changed ?? ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [December 27, 2009, 4:01am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/35 "2009-12-27T04:01:20Z")
I NEVER said it was a yank it was a custom fuddle…I wouldn’t have spent $900 on a convertor. I don’t know where this rumor got started. ---
**Author:** ![9c1ny](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/9c1ny/32/5050_2.png) [@9c1ny](https://forums.speedlife.net/u/9c1ny)\ **Post date:** [December 27, 2009, 4:03am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/36 "2009-12-27T04:03:27Z")
> [@LZ](#): > > I NEVER said it was a yank it was a custom fuddle…I wouldn’t have spent $900 on a convertor. > > I don’t know where this rumor got started. huh, beats the fuck out of me, I always thought it was a Yank what stall speed is it?? and Yanks are $675 last time I checked btw ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [December 27, 2009, 4:05am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/37 "2009-12-27T04:05:45Z")
Its a 4000 stall with a 2.5 str if you look at my original post yank was never mentioned I only mention this because someone threw in it was a yank after I sold it…and now Ed was going to send it back to them to get restalled. ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 27, 2009, 10:21am UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/38 "2009-12-27T10:21:23Z")
in any event, motor sale is pending. ---
**Author:** ![baseball24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baseball24/32/7452_2.png) [@baseball24](https://forums.speedlife.net/u/baseball24)\ **Post date:** [December 27, 2009, 8:02pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/39 "2009-12-27T20:02:57Z")
headers for sale? ---
**Author:** ![BigEd88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/biged88/32/5064_2.png) [@BigEd88](https://forums.speedlife.net/u/BigEd88)\ **Post date:** [December 27, 2009, 11:23pm UTC](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502/40 "2009-12-27T23:23:40Z")
pacesetter, yes, 50 bucks. [Previous page](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502.md?page=1) [Next page](https://forums.speedlife.net/t/ls1-4l60e-pacesetters-soon-10-bolt/64502.md?page=3)