# LS1 Build **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [June 30, 2005, 6:33pm UTC](https://forums.speedlife.net/t/ls1-build/504 "2005-06-30T18:33:44Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [June 30, 2005, 6:33pm UTC](https://forums.speedlife.net/t/ls1-build/504/1 "2005-06-30T18:33:44Z")
![http://www.jandjspeedshop.com/images/LS1build/block.jpg](http://www.jandjspeedshop.com/images/LS1build/block.jpg) Tin Foil in all its glory ![http://www.jandjspeedshop.com/images/LS1build/ringgap.jpg](http://www.jandjspeedshop.com/images/LS1build/ringgap.jpg) Precision gap ![http://www.jandjspeedshop.com/images/LS1build/ringfiler.jpg](http://www.jandjspeedshop.com/images/LS1build/ringfiler.jpg) Tool used to file the rings because the actual ring filer was taking too long ![http://www.jandjspeedshop.com/images/LS1build/pistonassembletool.jpg](http://www.jandjspeedshop.com/images/LS1build/pistonassembletool.jpg) Expensive tool used to assemble the pistons and rods, I will consider selling it for $19.99 ---
**Author:** ![TurboTSi](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@TurboTSi](https://forums.speedlife.net/u/TurboTSi)\ **Post date:** [June 30, 2005, 6:37pm UTC](https://forums.speedlife.net/t/ls1-build/504/2 "2005-06-30T18:37:40Z")
can you fit a 2 liter bottle in those cylinders??? Looks good man. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [June 30, 2005, 6:39pm UTC](https://forums.speedlife.net/t/ls1-build/504/3 "2005-06-30T18:39:53Z")
> [@TurboTSi](#): > > can you fit a 2 liter bottle in those cylinders??? Looks good man. Nah this isn’t no BBC or DRCE engine, however I do plan on using JB weld on this one because I dropped it, just like I did with your engine BTW how is the ole 4G63 running these days? ---
**Author:** ![TurboTSi](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@TurboTSi](https://forums.speedlife.net/u/TurboTSi)\ **Post date:** [June 30, 2005, 6:44pm UTC](https://forums.speedlife.net/t/ls1-build/504/4 "2005-06-30T18:44:52Z")
Man that JB weld holds up damn good… 12.5 @ 110… in 80 degrees and a lot of humidity and only 21psi. Should be faster next time around. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [June 30, 2005, 6:47pm UTC](https://forums.speedlife.net/t/ls1-build/504/5 "2005-06-30T18:47:53Z")
> [@TurboTSi](#): > > Man that JB weld holds up damn good… > > 12.5 @ 110… in 80 degrees and a lot of humidity and only 21psi. Should be faster next time around. Not bad for your autox turbo choice. Your car would be a rocketship with a larger turbo ---
**Author:** ![Jskrapper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jskrapper/32/7570_2.png) [@Jskrapper](https://forums.speedlife.net/u/Jskrapper)\ **Post date:** [June 30, 2005, 7:18pm UTC](https://forums.speedlife.net/t/ls1-build/504/6 "2005-06-30T19:18:46Z")
Yes it would. :tup: ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [June 30, 2005, 7:46pm UTC](https://forums.speedlife.net/t/ls1-build/504/7 "2005-06-30T19:46:37Z")
LOL jay i hope you are kidding with that die grinder :lol: :hitit: lots of stuff in those bores, clean them out 😛 ---
**Author:** ![87FOXGT](https://avatars.discourse-cdn.com/v4/letter/8/ecd19e/32.png) [@87FOXGT](https://forums.speedlife.net/u/87FOXGT)\ **Post date:** [June 30, 2005, 8:20pm UTC](https://forums.speedlife.net/t/ls1-build/504/8 "2005-06-30T20:20:02Z")
:tup: whos car is it goin in? the black juan? good luck with it. ---
**Author:** ![halas](https://avatars.discourse-cdn.com/v4/letter/h/898d66/32.png) [@halas](https://forums.speedlife.net/u/halas)\ **Post date:** [June 30, 2005, 8:56pm UTC](https://forums.speedlife.net/t/ls1-build/504/9 "2005-06-30T20:56:02Z")
any details on the build up?? good job on the rings. ---
**Author:** ![jeeves744](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeves744/32/7619_2.png) [@jeeves744](https://forums.speedlife.net/u/jeeves744)\ **Post date:** [June 30, 2005, 9:36pm UTC](https://forums.speedlife.net/t/ls1-build/504/10 "2005-06-30T21:36:03Z")
you’ll just have to wait till its in my car and find out the hard way ---
**Author:** ![EMX](https://avatars.discourse-cdn.com/v4/letter/e/7ea924/32.png) [@EMX](https://forums.speedlife.net/u/EMX)\ **Post date:** [June 30, 2005, 10:12pm UTC](https://forums.speedlife.net/t/ls1-build/504/11 "2005-06-30T22:12:08Z")
looks slow 😛 ---
**Author:** ![JDMR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmr2/32/7587_2.png) [@JDMR2](https://forums.speedlife.net/u/JDMR2)\ **Post date:** [July 1, 2005, 12:52am UTC](https://forums.speedlife.net/t/ls1-build/504/12 "2005-07-01T00:52:25Z")
so will it ever run, or just look pretty :eek: ---
**Author:** ![Twizted](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/twizted/32/7206_2.png) [@Twizted](https://forums.speedlife.net/u/Twizted)\ **Post date:** [July 1, 2005, 5:16am UTC](https://forums.speedlife.net/t/ls1-build/504/13 "2005-07-01T05:16:23Z")
^^ :lol: ---
**Author:** ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)\ **Post date:** [July 1, 2005, 5:47am UTC](https://forums.speedlife.net/t/ls1-build/504/14 "2005-07-01T05:47:18Z")
I only see 4 cylinders… :tup: ---
**Author:** ![RuBiCaNT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rubicant/32/7622_2.png) [@RuBiCaNT](https://forums.speedlife.net/u/RuBiCaNT)\ **Post date:** [July 1, 2005, 5:48am UTC](https://forums.speedlife.net/t/ls1-build/504/15 "2005-07-01T05:48:20Z")
Nice work, J… ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [July 1, 2005, 6:05am UTC](https://forums.speedlife.net/t/ls1-build/504/16 "2005-07-01T06:05:41Z")
hey, how come when i put my rings in my block they didnt look like that. (i am upset about how loose in the hole my pistons are, can you tell?) i would appear your machinist figured out how to bore cylinders recently. ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [July 1, 2005, 6:37am UTC](https://forums.speedlife.net/t/ls1-build/504/17 "2005-07-01T06:37:08Z")
LOL LOL LOLLJOSAihdifughbiusadgfi;auhfiuahdgf;iuhgai;ouhir;ouhgiu;oiuhuhafdh; HHHHHHHHHHHHHHHHHHHHHHAAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHHH ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [July 1, 2005, 7:43am UTC](https://forums.speedlife.net/t/ls1-build/504/18 "2005-07-01T07:43:29Z")
> [@halas](#): > > any details on the build up?? good job on the rings. I don’t think the owner would appreciate me spilling the beans, so sorry ---
**Author:** ![Juan](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@Juan](https://forums.speedlife.net/u/Juan)\ **Post date:** [July 1, 2005, 7:47am UTC](https://forums.speedlife.net/t/ls1-build/504/19 "2005-07-01T07:47:27Z")
coo-coo ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [July 1, 2005, 8:38am UTC](https://forums.speedlife.net/t/ls1-build/504/20 "2005-07-01T08:38:48Z")
> [@Zer0DazE](#): > > hey, how come when i put my rings in my block they didnt look like that. > (i am upset about how loose in the hole my pistons are, can you tell?) > i would appear your machinist figured out how to bore cylinders recently. Did you have a little machine work accident?? [Next page](https://forums.speedlife.net/t/ls1-build/504.md?page=2)