# LS1 cam, and AFR heads **URL:** \ **Category:** Classifieds\ **Created:** [April 4, 2010, 8:14am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726 "2010-04-04T08:14:51Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 4, 2010, 8:14am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/1 "2010-04-04T08:14:51Z")
These heads are AFR 225’s 72cc worked by Cartek , heads are complete with 2.055/1.60 valves , inconel exhaust valves , bronze guides , 921 springs . These are the same heads/cam that Mike Romain ran on my his big bore 388cid single turbo set up that ran 9.33 at 149, the heads are ideal for a 4.125/4.130 bore . I bought these, had new guides and a complete refersh (done by Bakers Cylinder Heads in Henderson NV - over a thosand dollars additional invested). I paid A LOT for these heads …and as the story goes, my loss - your gain. I have the cam that was part of this combo for sale as well. ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads.jpg) ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHardware.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHardware.jpg) ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads-2.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads-2.jpg) ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads-1.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/AFRHeads-1.jpg) $ 1650 plus shipping. Cartek Custom Turbo Grind Cam. (Part of setup decribed in the AFR Heads info). 238/578 244/570 114 LSA ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/Cam.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/Cam.jpg) $250 plus shipping MTI Hydrolic Roller cam. 5000 Miles, 244/612 244/612 (Dont know LSA) ![http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/Cam.jpg](http://i88.photobucket.com/albums/k194/photostry/C5%20Parts%20for%20sale/Cam.jpg) $250 plus shipping ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [April 4, 2010, 8:59am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/2 "2010-04-04T08:59:58Z")
wow thats a great price for those afr’s!!! someone pick these up for their boosted project! ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 4, 2010, 10:15am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/3 "2010-04-04T10:15:14Z")
Ya, there is more them that into them WITHOUT the price of the castings or CNC porting. ---
**Author:** ![Freek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freek/32/7357_2.png) [@Freek](https://forums.speedlife.net/u/Freek)\ **Post date:** [April 4, 2010, 10:16am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/4 "2010-04-04T10:16:59Z")
tempted to for the future build … ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 4, 2010, 10:37am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/5 "2010-04-04T10:37:14Z")
the heads are setup for the bore, and move some wind on it. ---
**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\ **Post date:** [April 4, 2010, 11:49am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/6 "2010-04-04T11:49:50Z")
Drew, this has your name all over it. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 4, 2010, 4:57pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/7 "2010-04-04T16:57:47Z")
2nd cam is the MTI S1 cam and its on a 112 lsa. It clears on a stock heads LS1 without flycutting (Zack from MTi) 🙂 ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [April 4, 2010, 5:19pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/8 "2010-04-04T17:19:11Z")
why wouldn’t u put those heads on your car? seems like a stealing deal. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 4, 2010, 7:03pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/9 "2010-04-04T19:03:41Z")
I don’t need any more parts. I have my nice LS6 heads to get on the car some time, and dial in on the car. ---
**Author:** ![HydroStream6](https://avatars.discourse-cdn.com/v4/letter/h/8e8cbc/32.png) [@HydroStream6](https://forums.speedlife.net/u/HydroStream6)\ **Post date:** [April 5, 2010, 8:50am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/10 "2010-04-05T08:50:27Z")
If I didn’t just bolt down my 317s I may have found a way to afford these… nice price bro! ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 5, 2010, 11:46am UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/11 "2010-04-05T11:46:40Z")
$1600 and my apple fritter you ate? ---
**Author:** ![baseball24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baseball24/32/7452_2.png) [@baseball24](https://forums.speedlife.net/u/baseball24)\ **Post date:** [April 6, 2010, 3:14pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/12 "2010-04-06T15:14:49Z")
if you want to install the cam in my car sure ill take it lol… i cant wait to do a cam in my car ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 9, 2010, 6:53pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/13 "2010-04-09T18:53:33Z")
that would be a great deal. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 29, 2010, 3:02pm UTC](https://forums.speedlife.net/t/ls1-cam-and-afr-heads/152726/14 "2010-04-29T15:02:10Z")
Heads and turbo cam are sold. Still have the MTI cam.