# Ls2 itb tuning questions. **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [May 22, 2013, 4:53am UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760 "2013-05-22T04:53:45Z")\ **Posts on this page:** 7\ **Page:** 3
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [May 27, 2013, 6:06am UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/41 "2013-05-27T06:06:43Z")
> [@robftw](#): > > “You can delete the_MAF_sensor, There is a 1bar SD OS available for the 99-02 F-Body PCM’s via HPTuners that runs entirely off of a VE table and also has TPS modifier table vs RPM so that ITB’s can easily be tuned”. > > All I got from him Its pretty much what the previous convos were about As long as he makes provisions for the MAP sensor it shouldn’t be bad. ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [May 27, 2013, 6:46am UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/42 "2013-05-27T06:46:06Z")
> [@LZ](#): > > Its pretty much what the previous convos were about > > As long as he makes provisions for the MAP sensor it shouldn’t be bad. I was told tapping each runner and plumbing them to a common “block” would be sufficient for a map reference. Should be super easy if that’s the case ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [May 27, 2013, 7:59am UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/43 "2013-05-27T07:59:54Z")
> [@BREETIME](#): > > I was told tapping each runner and plumbing them to a common “block” would be sufficient for a map reference. Should be super easy if that’s the case If only you knew someone who could fab that up… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 27, 2013, 2:49pm UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/44 "2013-05-27T14:49:57Z")
> [@BREETIME](#): > > I was told tapping each runner and plumbing them to a common “block” would be sufficient for a map reference. Should be super easy if that’s the case Can’t wait to see the progress. You have lots of fabrication ahead of you. Have an idea on TB yet? Linkages and TPS? ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [May 27, 2013, 3:15pm UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/45 "2013-05-27T15:15:00Z")
> [@Spam16v](#): > > If only you knew someone who could fab that up… Ugh. I wish I did. I don’t have time for this shit > [@J & J](#): > > Can’t wait to see the progress. You have lots of fabrication ahead of you. Have an idea on TB yet? Linkages and TPS? Yes, I have the throttle bodies taken care of. I’m guessing I will have to associate the tips in with the linkage some how. Or off the other side of the throttle body (that doesn’t have the cam pulley) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 27, 2013, 5:56pm UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/46 "2013-05-27T17:56:26Z")
> [@BREETIME](#): > > Ugh. I wish I did. I don’t have time for this shit > > Yes, I have the throttle bodies taken care of. I’m guessing I will have to associate the tips in with the linkage some how. Or off the other side of the throttle body (that doesn’t have the cam pulley) Care to share what throttle body you plan on using? ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [May 27, 2013, 6:08pm UTC](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760/47 "2013-05-27T18:08:55Z")
> [@J & J](#): > > Care to share what throttle body you plan on using? a 50mm unit [Previous page](https://forums.speedlife.net/t/ls2-itb-tuning-questions/230760.md?page=2)