# ls6 vs BBK vs FAST intake manifold test **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [August 23, 2009, 12:21pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506 "2009-08-23T12:21:38Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [August 23, 2009, 12:21pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/1 "2009-08-23T12:21:38Z")
I tested a few intakes, and TB setups on my car. 😃 ![http://i2.photobucket.com/albums/y11/studderin/LS1%20intakes/DSC02889.jpg](http://i2.photobucket.com/albums/y11/studderin/LS1%20intakes/DSC02889.jpg) ??? ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [August 23, 2009, 12:30pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/2 "2009-08-23T12:30:20Z")
nice writeup hoebag. i loved my ls6/ ported stock TB the best of all. ---
**Author:** ![baseball24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baseball24/32/7452_2.png) [@baseball24](https://forums.speedlife.net/u/baseball24)\ **Post date:** [August 23, 2009, 12:30pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/3 "2009-08-23T12:30:54Z")
wow really nice write up… i know for sure ill probably get the BBK when i get the money. This should be a stickie on LS1tech ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [August 23, 2009, 12:40pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/4 "2009-08-23T12:40:07Z")
let my know, I might be selling the BBK used for 2 dyno pulls only. 🙂 I wanted to mill the runners down a few inches, and do some port work. I like the intake a lot. But don’t think I’ll have time for that to happen. My 243 heads I could work on next week, if Im not swaped at work like it looks like. I have to put some time into them blending the VJ, that is done. Good news is yesterday they moved 294cfm with a stock SSR unblended with stock valve, on a 3.90 plate. up from like 258 on the stock VJ, but a small throat, and bowl for room to work with. Exhaust was really good too, sounded great all turned up. Good airspeed too, 360fps I remember? ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [August 23, 2009, 12:40pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/5 "2009-08-23T12:40:35Z")
:tup: ---
**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\ **Post date:** [August 23, 2009, 12:46pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/6 "2009-08-23T12:46:34Z")
that bbk intake looks beautiful on top of that motor =) i like it very much ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [August 23, 2009, 7:05pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/7 "2009-08-23T19:05:51Z")
is that 9.8 lbs or 98.xx lbs?? lol ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [August 26, 2009, 8:37pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/8 "2009-08-26T20:37:33Z")
![http://i2.photobucket.com/albums/y11/studderin/LS1%20intakes/IMG_3499.jpg](http://i2.photobucket.com/albums/y11/studderin/LS1%20intakes/IMG_3499.jpg) BBK-85 and LS6-75 up close. hoebag:( ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [December 5, 2009, 2:33pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/9 "2009-12-05T14:33:09Z")
bump. I’m going to test a super victor intake soon. 🙂 ![http://i31.photobucket.com/albums/c367/1fastdeuce/truck033.jpg](http://i31.photobucket.com/albums/c367/1fastdeuce/truck033.jpg) maybe a GMPP, and a vic jr. if I get my hands on one? ---
**Author:** ![slow84ta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slow84ta/32/7265_2.png) [@slow84ta](https://forums.speedlife.net/u/slow84ta)\ **Post date:** [December 5, 2009, 3:10pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/10 "2009-12-05T15:10:46Z")
oh my, carbed ls1? ---
**Author:** ![jt76](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jt76/32/5100_2.png) [@jt76](https://forums.speedlife.net/u/jt76)\ **Post date:** [December 5, 2009, 3:20pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/11 "2009-12-05T15:20:03Z")
I doubt it, a lot of guys run these with elbows and and a TB ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [December 6, 2009, 2:13pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/12 "2009-12-06T14:13:12Z")
no elbow, carb style TB ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [December 6, 2009, 6:29pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/13 "2009-12-06T18:29:44Z")
thats what i wanna see… get it done johnny ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [December 13, 2009, 8:52pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/14 "2009-12-13T20:52:30Z")
haha, an accufab 4500 flows 2128 CFM and has four 2-1/4" throttle plates. My GTP went mid 11’s with two 2 1/4 mufflers and tail pipes. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [January 9, 2010, 5:54pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/15 "2010-01-09T17:54:47Z")
Round 2 of intake testing is still coming. Got this the other day, used my hookup :snky: - Super Victor LS1; Intake Manifold; For Use w/High-Output Competition Electronic Fuel Injection; Racing Use Only; - Accepted By NASCAR For Grand National Series - Bigger Power Gains - For Use With EFI - Offers Greater Air Flow Potential - Cylinder Head Type: Standard - Emission: With EGR - Engine Make/Size: Chevy Small Block LS1 - Number Of Carbs: None, For Fuel Injection - Position: N/A - RPM Range: 3500-8000 - Usage: Racing - Weight: 24 LB - Height: 10in. - Width: 17in. - Depth: 22in. ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4108.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4108.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4107.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4107.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4111.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4111.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4105.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4105.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4112.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4112.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4113.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4113.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4116.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4116.jpg) ![http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4125.jpg](http://i2.photobucket.com/albums/y11/studderin/super%20victor%20%20LS1%20EFI/IMG_4125.jpg) Ran some numbers on it as cast, its big 🙂 2.90/2.915 msa, thats alot bigger then my stock heads. Even what the 243s I’m porting that are at 313cfm right now peak. Wish a stock valve/3.90 bore. Going to move the cam position around, and see how the little streetsweeper cam dose for rpms. But I’ll probably change to a different cam for this intake anyway, like you should. ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [January 9, 2010, 8:18pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/16 "2010-01-09T20:18:50Z")
for the love of god, DOES ---
**Author:** ![baseball24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baseball24/32/7452_2.png) [@baseball24](https://forums.speedlife.net/u/baseball24)\ **Post date:** [January 10, 2010, 6:34pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/17 "2010-01-10T18:34:18Z")
would u like to test on my car? can u just keep the parts on after your done ---
**Author:** ![Copper280z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/copper280z/32/5464_2.png) [@Copper280z](https://forums.speedlife.net/u/Copper280z)\ **Post date:** [January 10, 2010, 6:47pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/18 "2010-01-10T18:47:25Z")
Who is flowing your heads? About how much is it to flow one cylinder? ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [January 12, 2010, 9:14am UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/19 "2010-01-12T09:14:04Z")
> [@baseball24](#): > > would u like to test on my car? can u just keep the parts on after your done 1998 Trans Am Vert What mods are on it, you think its a good setup for this intake? ---
**Author:** ![baseball24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baseball24/32/7452_2.png) [@baseball24](https://forums.speedlife.net/u/baseball24)\ **Post date:** [January 12, 2010, 4:41pm UTC](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506/20 "2010-01-12T16:41:04Z")
> [@Studderin](#): > > 1998 Trans Am Vert > > What mods are on it, you think its a good setup for this intake? as of right now close to stock…will be building up in the spring once i come back from florida. I plan on running the bbk manifold [Next page](https://forums.speedlife.net/t/ls6-vs-bbk-vs-fast-intake-manifold-test/72506.md?page=2)