# LSx Motors vs. ALL

**URL:** <https://forums.speedlife.net/t/lsx-motors-vs-all/238518>\
**Category:** Shift518 Automotive\
**Created:** [August 22, 2008, 3:07pm UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518 "2008-08-22T15:07:05Z")\
**Posts on this page:** 20\
**Page:** 18

<div class="post-metadata">

**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\
**Post date:** [August 27, 2008, 6:34am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/341 "2008-08-27T06:34:16Z")

</div>

> [@Cossey](#):
>
> Someone on this site has a Z71 Camaro. Only one ever made.

thats about to be changed!

---

<div class="post-metadata">

**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\
**Post date:** [August 27, 2008, 6:35am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/342 "2008-08-27T06:35:46Z")

</div>

> [@SSmokinn SS](#):
>
> …you dont see blown imports still running 13’s stock.

No, because they’re not dumb enough to go to the track with a fucked car. Unless they’re PR.

---

<div class="post-metadata">

**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\
**Post date:** [August 27, 2008, 6:36am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/343 "2008-08-27T06:36:28Z")

</div>

> [@Shawn96VR-4](#):
>
> 600RWHP but what if you lower the compression? Is that the limiting factor?

ehhh if you want to run boost, its a better over all idea to just get a Iron block so under high pressure + heat, you dont hafto worry about any aluminum melting…

but pretty much compression holds it back from high numbers + reliability

---

<div class="post-metadata">

**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\
**Post date:** [August 27, 2008, 6:37am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/344 "2008-08-27T06:37:01Z")

</div>

> [@SSmokinn SS](#):
>
> thats about to be changed!

About damn time. I feel like taking that car on Keeler’s Land Rover course every time I see it.

---

<div class="post-metadata">

**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\
**Post date:** [August 27, 2008, 6:38am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/345 "2008-08-27T06:38:42Z")

</div>

> [@SSmokinn SS](#):
>
> also, correct me if im wrong but didnt Swifty’s bone stock beater just blow the fuck up?

ANY car can blow up. He uses the car for delivering pizza and beating the shit out of. The car’s how old and has how many miles? Wear and tear can/will eventually take it’s toll on ANY motor.

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 6:42am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/346 "2008-08-27T06:42:41Z")

</div>

a lot of times if you run the heads off of the 6.0 (lq9) and throw them on and you’ll lower the compression, but not by much, it would still be somewhere between 9:1to 10:1. No one runs real high boost on ls1’s because you would really need to throw in low compression piston and aftermarket heads to get the compression lower.

---

<div class="post-metadata">

**Author:** ![Shawn96VR-4](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Shawn96VR-4](https://forums.speedlife.net/u/Shawn96VR-4)\
**Post date:** [August 27, 2008, 6:58am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/347 "2008-08-27T06:58:08Z")

</div>

But the actual block itself limits at about 600WHP on stock internals?

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 7:13am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/348 "2008-08-27T07:13:03Z")

</div>

> [@Shawn96VR-4](#):
>
> But the actual block itself limits at about 600WHP on stock internals?

not really sure, i no for a fact no one has ever broken the stock crank, but im not an f/i guy. I’ll look it up though

---

<div class="post-metadata">

**Author:** ![Shawn96VR-4](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Shawn96VR-4](https://forums.speedlife.net/u/Shawn96VR-4)\
**Post date:** [August 27, 2008, 7:42am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/349 "2008-08-27T07:42:00Z")

</div>

> [@plaf713](#):
>
> not really sure, i no for a fact no one has ever broken the stock crank, but im not an f/i guy. I’ll look it up though

No one has broken the stock crank? That’s damn impressive.

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 7:46am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/350 "2008-08-27T07:46:18Z")

</div>

> [@Shawn96VR-4](#):
>
> No one has broken the stock crank? That’s damn impressive.

i shouldnt said ever, its never been posted on ls1tech so some joe schmo could have

---

<div class="post-metadata">

**Author:** ![Shawn96VR-4](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Shawn96VR-4](https://forums.speedlife.net/u/Shawn96VR-4)\
**Post date:** [August 27, 2008, 7:54am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/351 "2008-08-27T07:54:28Z")

</div>

> [@plaf713](#):
>
> i shouldnt said ever, its never been posted on ls1tech so some joe schmo could have

What about the pistons/block itself? 600WHP is under expectations given smaller displacement motors have done better.

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [August 27, 2008, 8:00am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/352 "2008-08-27T08:00:16Z")

</div>

> [@Shawn96VR-4](#):
>
> What about the pistons/block itself? 600WHP is under expectations given smaller displacement motors have done better.

I like your style

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 8:01am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/353 "2008-08-27T08:01:22Z")

</div>

> [@Shawn96VR-4](#):
>
> What about the pistons/block itself? 600WHP is under expectations given smaller displacement motors have done better.

from what im reading most guys run up to 10 psi on a stock ls1, numbers vary depending on heads, cam, spray etc. i would say 750rwhp at the most though, most guys that run serious boost just pick up the 6.0 iron block anyways.

---

<div class="post-metadata">

**Author:** ![Shawn96VR-4](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@Shawn96VR-4](https://forums.speedlife.net/u/Shawn96VR-4)\
**Post date:** [August 27, 2008, 8:07am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/354 "2008-08-27T08:07:50Z")

</div>

> [@plaf713](#):
>
> from what im reading most guys run up to 10 psi on a stock ls1, numbers vary depending on heads, cam, spray etc. i would say 750rwhp at the most though, most guys that run serious boost just pick up the 6.0 iron block anyways.

Different debate.

1. How much boost pressure can it hold without modifications? Plaf said 20PSI-30PSI was not doable. Now, it’s 10?
2. How much power can it hold without modifications? Heard 600 and now 750?

To me, I just prefer dealing with keeping it as simple as possible. Swapping in a new block changes the car but that’s just me.

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 8:32am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/355 "2008-08-27T08:32:17Z")

</div>

i dont recall saying 600rwhp, you cant say a an exact number is where an ls1 is going to give up on, to many variables, most ls1’s that are boosted arent actually ls1’s, more lsx’s simply because ls1’s arent made for boost, so its not such an easy question to answer, and to be honest i dont even go into the f/i section on ls1tech

---

<div class="post-metadata">

**Author:** ![Auto0utcast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast/32/6281_2.png) [@Auto0utcast](https://forums.speedlife.net/u/Auto0utcast)\
**Post date:** [August 27, 2008, 8:40am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/356 "2008-08-27T08:40:17Z")

</div>

all i need for 600hp now is a bigger turbo and retune with c16… block _ **SHOULD** _ be good for 600-800awhp. do the math on hp/liter there.

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 8:43am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/357 "2008-08-27T08:43:26Z")

</div>

> [@EJ257FTW](#):
>
> all i need for 600hp now is a bigger turbo and retune with c16… block _ **SHOULD** _ be good for 600-800awhp. do the math on hp/liter there.

stop it, just stop right now :nono

---

<div class="post-metadata">

**Author:** ![Auto0utcast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast/32/6281_2.png) [@Auto0utcast](https://forums.speedlife.net/u/Auto0utcast)\
**Post date:** [August 27, 2008, 8:49am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/358 "2008-08-27T08:49:14Z")

</div>

> [@plaf713](#):
>
> stop it, just stop right now :nono

why, because your motor cant make that out of more than double the displacement without switching blocks? :nana

---

<div class="post-metadata">

**Author:** ![GranMassaX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/granmassax/32/6299_2.png) [@GranMassaX](https://forums.speedlife.net/u/GranMassaX)\
**Post date:** [August 27, 2008, 8:53am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/359 "2008-08-27T08:53:22Z")

</div>

> [@EJ257FTW](#):
>
> why, because your motor cant make that out of more than double the displacement without switching blocks? :nana

you should stay out of this thread… :nod

---

<div class="post-metadata">

**Author:** ![plaf713](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@plaf713](https://forums.speedlife.net/u/plaf713)\
**Post date:** [August 27, 2008, 8:53am UTC](https://forums.speedlife.net/t/lsx-motors-vs-all/238518/360 "2008-08-27T08:53:57Z")

</div>

> [@EJ257FTW](#):
>
> why, because your motor cant make that out of more than double the displacement without switching blocks? :nana

well unlike you i know that 600-800whp is just unrealistic and would not fit into my budget

[Previous page](https://forums.speedlife.net/t/lsx-motors-vs-all/238518.md?page=17)

[Next page](https://forums.speedlife.net/t/lsx-motors-vs-all/238518.md?page=19)
