# lt1 383 project **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [December 11, 2006, 9:37pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768 "2006-12-11T21:37:46Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 11, 2006, 9:37pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/1 "2006-12-11T21:37:46Z")
hello, I am of Mexico and have a doubt I hope help me, have lt1 in project all the parts almost ready and want to know that they advise to me, I have doubt in injectors? computer programming? thanks for its aid and I put the parts here to them that use. factory block injectors and computer trick flow ported 195,s heads 2.02 and 1.6 valves 383 balanced stroker kit keith black pistons in 40 bore hypertech III programer ported 54 mm throtol body and maf 3000 torque converter transmission shift kit large headers 1.3/4 primary tubes CCA-07-306-8 competition cam 510 and 540 intake and exaust factory flexplate and damper race fuel pump 4.11 diferential gear and posi loc race tires 28x10.5x16 thanks for yours comentaries !!! sorry for post in this area please mods move this post ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [December 12, 2006, 4:34am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/2 "2006-12-12T04:34:02Z")
welcome:beer: scrap the hypertech III programer,get svo #30 injectors & a [fastchip.com](http://fastchip.com) tune ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [December 12, 2006, 5:41am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/3 "2006-12-12T05:41:50Z")
Welcome. Just finishing my 383 LT1 also. If the engine is internally balanced you’ll need to have the balance weight removed from the flexplate. Might also want to have a machine shop check that the flexplate is neutral balanced after the weight is removed. I assume the heads came with upgraded springs? Using 1.6 ratio roller rockers. Make sure to check your pushrod length too. Stock length might not be right anymore. ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [December 12, 2006, 5:57am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/4 "2006-12-12T05:57:48Z")
welcome! ---
**Author:** ![JackdUp](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jackdup/32/6015_2.png) [@JackdUp](https://forums.speedlife.net/u/JackdUp)\ **Post date:** [December 12, 2006, 6:56am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/5 "2006-12-12T06:56:30Z")
Hola! Su coche es muy bueno. Da me su keith black pistons! 😃 De donde eres en Mexico? Cuidad Mexico? Guadalajara? Tiujana? > [@for the illiterate in spanish..."](#): > > Hello, Your car is very good. Give me your Keith Black pistons! 😃 > > Where are you from in Mexico? Mexico City?.. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [December 12, 2006, 8:08am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/6 "2006-12-12T08:08:02Z")
welcome ---
**Author:** ![Swift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/swift/32/6024_2.png) [@Swift](https://forums.speedlife.net/u/Swift)\ **Post date:** [December 12, 2006, 11:20am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/7 "2006-12-12T11:20:28Z")
welcome i had a 383 lt4 that i sold not too long ago ---
**Author:** ![SCHMEIDER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/schmeider/32/6032_2.png) [@SCHMEIDER](https://forums.speedlife.net/u/SCHMEIDER)\ **Post date:** [December 12, 2006, 12:09pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/8 "2006-12-12T12:09:19Z")
welcome ---
**Author:** ![Laura00WS6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laura00ws6/32/6017_2.png) [@Laura00WS6](https://forums.speedlife.net/u/Laura00WS6)\ **Post date:** [December 12, 2006, 4:10pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/9 "2006-12-12T16:10:16Z")
welcome ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [December 12, 2006, 4:28pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/10 "2006-12-12T16:28:22Z")
welcome ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [December 12, 2006, 5:05pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/11 "2006-12-12T17:05:50Z")
presidente los choto?:dunno: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 12, 2006, 6:26pm UTC](https://forums.speedlife.net/t/lt1-383-project/186768/12 "2006-12-12T18:26:30Z")
thanks friends, I am in monterrey Mexico and we are preparing that car I hope work very well, will try to obtain the injectors that they recommend to me, and I am going to test hypertech programer and later she will program the computer where you they recommend ,the 383 kit not it and even balanced, crankshaft it is external balance not that they recommend to me the crankshaft number in summit is ESP-103523750 my rods is 5.7 scat i beam keith black pistons and factory damper and flexplate? and my rocker,s if they are of 1,6… thanks! ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [December 13, 2006, 4:24am UTC](https://forums.speedlife.net/t/lt1-383-project/186768/13 "2006-12-13T04:24:44Z")
any pictures?