# Lumber source **URL:** \ **Category:** NYSpeed Off Topic\ **Created:** [April 7, 2012, 1:23pm UTC](https://forums.speedlife.net/t/lumber-source/221909 "2012-04-07T13:23:38Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Hass](https://avatars.discourse-cdn.com/v4/letter/h/51bf81/32.png) [@Hass](https://forums.speedlife.net/u/Hass)\ **Post date:** [April 7, 2012, 1:23pm UTC](https://forums.speedlife.net/t/lumber-source/221909/1 "2012-04-07T13:23:38Z")
Are there any good lumber sources other than obvious? Like Lowes/Depot/Lenco? I’ve had bad experience with GUIs lumber… Buying PT 2x6x20’s that were warped/twisted to all hell and just plain fucked with knots and gnawed off pieces. Their plywood was just about as shitty. I forgot the factory that their plywood came from though, it wasn’t the same as Depot or Lenco’s… Just looking for 8’ or 10’ PT dog ear pickets, 2x4s and 4x4s. I prefer 10’ pickets since I have to bury a foot or two of it all. Fencing in about roughly 150x60 (It’s actually 150’ sides, with 80’ in the rear and 40’ in the front… Sides are slightly tapered in towards the front.) Amish? some small town lumber yard? ---
**Author:** ![KuntryQuestTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kuntryquesttsi/32/5010_2.png) [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)\ **Post date:** [April 7, 2012, 1:28pm UTC](https://forums.speedlife.net/t/lumber-source/221909/2 "2012-04-07T13:28:35Z")
Try potters right in corfu, either they are cheap or they screw up every time I go there lol ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [April 7, 2012, 2:09pm UTC](https://forums.speedlife.net/t/lumber-source/221909/3 "2012-04-07T14:09:18Z")
Don’t know of much out in the boonies there. ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [April 7, 2012, 2:13pm UTC](https://forums.speedlife.net/t/lumber-source/221909/4 "2012-04-07T14:13:00Z")
In for results, gotta fence about 100’ myself. ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 7, 2012, 3:27pm UTC](https://forums.speedlife.net/t/lumber-source/221909/5 "2012-04-07T15:27:50Z")
84 idiots ---
**Author:** ![cobalt300z](https://avatars.discourse-cdn.com/v4/letter/c/858c86/32.png) [@cobalt300z](https://forums.speedlife.net/u/cobalt300z)\ **Post date:** [April 7, 2012, 4:16pm UTC](https://forums.speedlife.net/t/lumber-source/221909/6 "2012-04-07T16:16:22Z")
Try newfane lumber in lockport. My dad owns it. Great lumber, great prices, great service. Will answer any building question you have ---
**Author:** ![PureXTC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/purextc/32/5223_2.png) [@PureXTC](https://forums.speedlife.net/u/PureXTC)\ **Post date:** [April 8, 2012, 5:56am UTC](https://forums.speedlife.net/t/lumber-source/221909/7 "2012-04-08T05:56:30Z")
Trees. On a serious note, lemme know if you want the fence installed. I own a company that installs fences. ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [April 8, 2012, 6:02am UTC](https://forums.speedlife.net/t/lumber-source/221909/8 "2012-04-08T06:02:49Z")
> **[Mosher Lumber | Buffalo, NY | Lumber Supply](http://www.mosherlumber.com/)** > > When you need the best quality lumber in Buffalo, NY, call Mosher Lumber or stop in today! And tell them Ryan from Schuele (pronounced shooley) sent you if you go there. ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [April 8, 2012, 6:33am UTC](https://forums.speedlife.net/t/lumber-source/221909/9 "2012-04-08T06:33:19Z")
> [@PureXTC](#): > > Trees. > > On a serious note, lemme know if you want the fence installed. I own a company that installs fences. 6’ stockade fence, basic dog eared pickets, 100’ straight run, level ground, only obstruction is 3’ away from a garage for 6’ at one end. Rough # installed? ---
**Author:** ![KuntryQuestTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kuntryquesttsi/32/5010_2.png) [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)\ **Post date:** [April 8, 2012, 7:18am UTC](https://forums.speedlife.net/t/lumber-source/221909/10 "2012-04-08T07:18:45Z")
Let me know if you want your fence painted, I know I guy that paints fences. (ieatpaint) ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [April 8, 2012, 8:44am UTC](https://forums.speedlife.net/t/lumber-source/221909/11 "2012-04-08T08:44:05Z")
sprayer with Thomson water seal ftw. White washing fence is for suckers ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [April 8, 2012, 9:28am UTC](https://forums.speedlife.net/t/lumber-source/221909/12 "2012-04-08T09:28:34Z")
im thinking of putting a deck on the back of the cockpit this summer so ill also be looking for best priced lumber… then i just need to round up some mexicans and bring them home to build the fucking thing ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [April 8, 2012, 9:51am UTC](https://forums.speedlife.net/t/lumber-source/221909/13 "2012-04-08T09:51:17Z")
> [@XwalkerX](#): > > im thinking of putting a deck on the back of the cockpit this summer so ill also be looking for best priced lumber… > > then i just need to round up some mexicans and bring them home to build the fucking thing :tup: ---
**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\ **Post date:** [April 8, 2012, 10:13am UTC](https://forums.speedlife.net/t/lumber-source/221909/14 "2012-04-08T10:13:49Z")
Forks lumber ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [April 8, 2012, 11:00am UTC](https://forums.speedlife.net/t/lumber-source/221909/15 "2012-04-08T11:00:29Z")
> [@Spam16v](#): > > sprayer with Thomson water seal ftw. White washing fence is for suckers Might as well use Mayonnaise to seal it. Unless they’ve changed their formula / quality, that shit sucks. ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [April 8, 2012, 3:06pm UTC](https://forums.speedlife.net/t/lumber-source/221909/16 "2012-04-08T15:06:48Z")
Nope, it’s still turrible. ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [April 8, 2012, 6:53pm UTC](https://forums.speedlife.net/t/lumber-source/221909/17 "2012-04-08T18:53:35Z")
> [@1QIKZ](#): > > Might as well use Mayonnaise to seal it. Unless they’ve changed their formula / quality, that shit sucks. Who makes good jams then? ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [April 9, 2012, 3:45am UTC](https://forums.speedlife.net/t/lumber-source/221909/18 "2012-04-09T03:45:51Z")
in a clear product? no one. in a light color sikkens, followed distantly by cabot, sherwin williams and benjamin moore. ---
**Author:** ![suzukiriderman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/suzukiriderman/32/7421_2.png) [@suzukiriderman](https://forums.speedlife.net/u/suzukiriderman)\ **Post date:** [April 21, 2012, 5:10am UTC](https://forums.speedlife.net/t/lumber-source/221909/19 "2012-04-21T05:10:01Z")
Yea, Sikkens is all my father uses on his boats and he has a lot of teak. You know if it holds up the best in a marine environment it’ll work at home.