# M18 metal crush/sealing washers?

**URL:** https://forums.speedlife.net/t/m18-metal-crush-sealing-washers/260301
**Category:** Shift518 Automotive
**Created:** [September 4, 2011, 1:28am UTC](https://forums.speedlife.net/t/m18-metal-crush-sealing-washers/260301 "2011-09-04T01:28:11Z")
**Posts on this page:** 1
**Showing post:** 8

<div class="post-metadata">

### Author: ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)
#### Post date: [September 4, 2011, 2:05am UTC](https://forums.speedlife.net/t/m18-metal-crush-sealing-washers/260301/8 "2011-09-04T02:05:49Z")

</div>

> [@Boxersix"](#):
>
> This bin here is probably the one I thought I had at my garage. I’ve got two magnesium washers here that will fit M18 thread. .725"ID x .855"OD x .060" thick. Also have two steel bellows crush washers use to seal high pressure hydraulic fluid, slightly larger. .80" x 1.02" x .08(will crush up to .045" to seal irregularities)
> 
> Yours if you want them. Can drop them in an envelope for you, just PM me the address to send off to.

PM’ed, thank you sir!!

> [@fs b16a (obdo) y1 tranny no grinds pwo ecu](https://forums.speedlife.net/t/fs-b16a-obdo-y1-tranny-no-grinds-pwo-ecu/45109/7):
>
> Also, FWIW, did you try calling Wallace Supply up of Exit 17N? They may have something like this. They sell hydraulic stuff.

No I did not sir. I just got around to researching this tonight.

---

_[View the full topic](https://forums.speedlife.net/t/m18-metal-crush-sealing-washers/260301)._