# Machining flywheel **URL:** \ **Category:** SON240sx Automotive\ **Created:** [March 1, 2010, 8:34pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836 "2010-03-01T20:34:03Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 1, 2010, 8:34pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/1 "2010-03-01T20:34:03Z")
Whats up SON! I was just going to take off the clutch off my s14 but before i go ahead and do that, i just want to get some options for shops that perform this service. Just give me some reputable shops that you guys have dealt with, within the gta. Thanks Shawn ---
**Author:** ![Cyprian](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cyprian/32/25410_2.png) [@Cyprian](https://forums.speedlife.net/u/Cyprian)\ **Post date:** [March 1, 2010, 8:54pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/2 "2010-03-01T20:54:30Z")
In barrie I have always dealt with ideal supply, costs about 40.00. I have never had an issue, I assume it would be the same in Toronto. ---
**Author:** ![renegade141](https://avatars.discourse-cdn.com/v4/letter/r/ba8739/32.png) [@renegade141](https://forums.speedlife.net/u/renegade141)\ **Post date:** [March 2, 2010, 6:17am UTC](https://forums.speedlife.net/t/machining-flywheel/131836/3 "2010-03-02T06:17:45Z")
Colins Machine Shop/Colins Automotive. Located on Nantucket ave. in scarborough. It will cost you around $50- half a day turn around. ---
**Author:** ![R33](https://avatars.discourse-cdn.com/v4/letter/r/5f8ce5/32.png) [@R33](https://forums.speedlife.net/u/R33)\ **Post date:** [March 2, 2010, 6:45am UTC](https://forums.speedlife.net/t/machining-flywheel/131836/4 "2010-03-02T06:45:19Z")
take it to any machine / transmission shop - the going rate is $40 - $60 for a resurface ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 2, 2010, 9:05am UTC](https://forums.speedlife.net/t/machining-flywheel/131836/5 "2010-03-02T09:05:10Z")
flat flywheel averages around 50. stepped flywheels averages around 80-100 ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 2, 2010, 12:02pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/6 "2010-03-02T12:02:10Z")
arite cool I just contacted GR automotive machine shop, he said its 45 bucks on average. Im gonna go check it out this week. Thanks for the info you guys ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 3, 2010, 2:35pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/7 "2010-03-03T14:35:54Z")
I was just curious as to whether you think this flywheel needs to be resurfaced or not. Here’s the pics: ![http://i977.photobucket.com/albums/ae251/jeeta_s/car78414.jpg](http://i977.photobucket.com/albums/ae251/jeeta_s/car78414.jpg) ![http://i977.photobucket.com/albums/ae251/jeeta_s/car78410.jpg](http://i977.photobucket.com/albums/ae251/jeeta_s/car78410.jpg) ---
**Author:** ![marty905](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@marty905](https://forums.speedlife.net/u/marty905)\ **Post date:** [March 3, 2010, 3:05pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/8 "2010-03-03T15:05:04Z")
needs to get machined for sure… so many hot spots ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 3, 2010, 5:15pm UTC](https://forums.speedlife.net/t/machining-flywheel/131836/9 "2010-03-03T17:15:16Z")
arite cool i just wanted to make sure ---
**Author:** ![jeeta\_s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeta_s/32/5758_2.png) [@jeeta\_s](https://forums.speedlife.net/u/jeeta_s)\ **Post date:** [March 9, 2010, 11:21am UTC](https://forums.speedlife.net/t/machining-flywheel/131836/10 "2010-03-09T11:21:52Z")
i got it done from G&R machining shop, real nice folks, he charged be 50 bucks, which is good considering the shit resurface the guy did before i bought the car. ill post up a pic just to show how it looks.