# mad l33t purchase

**URL:** <https://forums.speedlife.net/t/mad-l33t-purchase/40294>\
**Category:** NYSpeed Automotive\
**Created:** [December 14, 2007, 6:17pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294 "2007-12-14T18:17:44Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\
**Post date:** [December 16, 2007, 3:48pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/41 "2007-12-16T15:48:21Z")

</div>

engine-wise is it stock?

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [December 16, 2007, 3:49pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/42 "2007-12-16T15:49:46Z")

</div>

thats a cool lookin car

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 16, 2007, 4:17pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/43 "2007-12-16T16:17:18Z")

</div>

> [@Adictd2b00st](#):
>
> engine-wise is it stock?

pretty much. here is the full run-down  
Engine:  
Stock 3tc motor  
Mikuni 35mm Twin side draft carburators  
Cannon manifold  
New master and slave cylinder  
MSD coil Blaster

Interior  
Sparco Junior sprint seat  
Sparco Custom seatrails  
Sparco suede steering wheel  
Momo Steering wheel adaptor  
Apexi RSM  
New Sony MP3 player  
New Kenwood Speakers, tweeters and crossover (component sytem)  
No name 4 point harness

Suspension  
Custom Front Coilovers Made by Racetoys  
4 Brand New short stroke 5 way adjustable Tokico illuminas  
JDM Tein Camberplates Gold  
Tein Springs 7K fronts  
TRD Springs 6.5K Rear  
AE86 GTS front strut housing brakes/disc and calipers  
Cusco AE86 Lateral Rod

Wheels/Exterior  
1st gen SSR MKII’s with Sumitomo’s  
Rears 13x8 -12 offset  
Fronts 13x7 -5 offset  
JDM Levin Front end RARE!  
Japanese Automobile Federation emblem  
Volkswagen Rabbit Front Lip  
Fujitsubo axle back Exhaust  
Foglights

---

<div class="post-metadata">

**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\
**Post date:** [December 16, 2007, 4:25pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/44 "2007-12-16T16:25:09Z")

</div>

Why you bringing the car to Buffalo? You moving back here?

Love the car by the way.

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 16, 2007, 4:55pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/45 "2007-12-16T16:55:46Z")

</div>

> [@91MR2](#):
>
> Why you bringing the car to Buffalo? You moving back here?
> 
> Love the car by the way.

garage and trying to move back in with the folks so i dont have to pay rent and i can have a place to sit down and focus on my ASE/AEM certs.

and much thanks

---

<div class="post-metadata">

**Author:** ![eMKay](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/emkay/32/7428_2.png) [@eMKay](https://forums.speedlife.net/u/eMKay)\
**Post date:** [December 16, 2007, 5:07pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/46 "2007-12-16T17:07:30Z")

</div>

Swap out the carbs for stock or SCCA approved one, swap out the brakes, and wheels for stock, add safety gear, run ITB at 2050lbs with driver 🙂

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 16, 2007, 5:52pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/47 "2007-12-16T17:52:44Z")

</div>

> [@eMKay](#):
>
> Swap out the carbs for stock or SCCA approved one, swap out the brakes, and wheels for stock, add safety gear, run ITB at 2050lbs with driver 🙂

well she is going to be a fun/slow toy for about the first year while i source the parts i want. at which point i will gut her/ strip her/ paint her/ new trim/etc

i have 3 separate builds going into 1. lol(sounds crazy, but its not going to be as much work as you think)

#1 will be my wow jdm stock l33t original w/  
3TC-GTE(my motor now, but jdm, turbo, DOHC, non pushrod)  
–will be built/blown sufficiently for 300 or so whp  
#2 will be my wow JDM swap/drift setup  
1UZ lexus V8, built, blown and conservative 5-7 hundred horse  
#3 will be my time attack/track setup  
BUILT N/A ITB’d F20C about 280-300 whp

Rear diff will be from a 4th supra parts bin as will the transmission(6MT).  
-----(except for with the 3tc-gte motor. that will be the stock 5 speed)

cage will be FIA spec, so i can run drift/track days/time attacks/SCCA

---

<div class="post-metadata">

**Author:** ![reliant\_turbo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reliant_turbo/32/7189_2.png) [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)\
**Post date:** [December 16, 2007, 7:41pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/48 "2007-12-16T19:41:45Z")

</div>

looks awesome. 🙂 seeing the rest of it, its a tough call against the one i posted. 🙂

---

<div class="post-metadata">

**Author:** ![Zong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zong/32/7580_2.png) [@Zong](https://forums.speedlife.net/u/Zong)\
**Post date:** [December 16, 2007, 8:36pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/49 "2007-12-16T20:36:42Z")

</div>

> [@SoloIIscoob"](#):
>
> more jdm than zong

nothing is more jdm than me you fucking knobs  
 ![http://img.photobucket.com/albums/v230/zg326/jdmzg.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/0/4/04d48227221664a4403dd4f64d4aaa95b2651325.jpeg)

---

<div class="post-metadata">

**Author:** ![fbrendan](https://avatars.discourse-cdn.com/v4/letter/f/d26b3c/32.png) [@fbrendan](https://forums.speedlife.net/u/fbrendan)\
**Post date:** [December 16, 2007, 8:38pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/50 "2007-12-16T20:38:59Z")

</div>

God, that is so hot in a so non-hot way.

---

<div class="post-metadata">

**Author:** ![JoesTypeS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joestypes/32/7190_2.png) [@JoesTypeS](https://forums.speedlife.net/u/JoesTypeS)\
**Post date:** [December 17, 2007, 7:25am UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/51 "2007-12-17T07:25:47Z")

</div>

> [@SoloIIscoob](#):
>
> #1 will be my wow jdm stock l33t original w/  
> 3TC-GTE(my motor now, but jdm, turbo, DOHC, non pushrod)  
> –will be built/blown sufficiently for 300 or so whp  
> #2 will be my wow JDM swap/drift setup  
> 1UZ lexus V8, built, blown and conservative 5-7 hundred horse  
> #3 will be my time attack/track setup  
> BUILT N/A ITB’d F20C about 280-300 whp

None of this will happen

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 17, 2007, 10:54am UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/52 "2007-12-17T10:54:53Z")

</div>

um. already bought a 1UZ for $600 with harness/sensors/trans/rear diff.

also about to buy my 3TC-GTE motor this weekend.

how is this not going to happen?

> [@JoesTypeS](#):
>
> None of this will happen

---

<div class="post-metadata">

**Author:** ![JEG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeg/32/7246_2.png) [@JEG](https://forums.speedlife.net/u/JEG)\
**Post date:** [December 17, 2007, 11:42am UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/53 "2007-12-17T11:42:17Z")

</div>

bet it gets better gas milage than a bicycle lol.

---

<div class="post-metadata">

**Author:** ![Garick](https://avatars.discourse-cdn.com/v4/letter/g/8797f3/32.png) [@Garick](https://forums.speedlife.net/u/Garick)\
**Post date:** [December 17, 2007, 3:31pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/54 "2007-12-17T15:31:44Z")

</div>

wait…so you want to build 3 separate powertrains for this car and swap back and forth for different events/moods/etc?

---

<div class="post-metadata">

**Author:** ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)\
**Post date:** [December 17, 2007, 3:47pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/55 "2007-12-17T15:47:09Z")

</div>

> [@Garick](#):
>
> wait…so you want to build 3 separate powertrains for this car and swap back and forth for different events/moods/etc?

BWUAHAHAHAHHAHAHAHA.

:cjerk:

---

<div class="post-metadata">

**Author:** ![Avatar](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avatar/32/5076_2.png) [@Avatar](https://forums.speedlife.net/u/Avatar)\
**Post date:** [December 17, 2007, 6:20pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/56 "2007-12-17T18:20:50Z")

</div>

Nice ride, just one question… Why do all these classic JDM’s have their tires stretched to the holy-shit point?

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 17, 2007, 6:29pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/57 "2007-12-17T18:29:47Z")

</div>

> [@Garick](#):
>
> wait…so you want to build 3 separate powertrains for this car and swap back and forth for different events/moods/etc?

yup:sword:

1. blocks will have mounts modified to match up with stock location on the rolla and therefore will be “drop in”
2. each block is(through the same company) capable to mate with the supra tranny and therefore “drop in”
3. each block will be supported with its own ECU that will be piggy-backed by a Perfect Power SMT-6 and therefore each block will be “plug in”
4. the most major modifications needed are shaving of the firewall to adequately house the lexus V8(this means trouble areas will be modified to neatly/physically/correctly house the large block) as to make it perform at the level i expect.

you guys think im crazy. but i already know of two who run around with 1uz-fe swaps that change over to st00k motors for time attack.

> **[Toyota Corolla AE86 - Lexus 4.0 V8 Engine Swap - Super Street Magazine](https://www.motortrend.com/featuredvehicles/130_0609_toyota_corolla_ae86_lexus_v8_engine_swap/)**
>
> This old school Toyota Corolla AE86 has a killer Lexus V8 4.0 engine swap. Find all the details inside Super Street Magazine.

this is one lexus setup

---

<div class="post-metadata">

**Author:** ![Garick](https://avatars.discourse-cdn.com/v4/letter/g/8797f3/32.png) [@Garick](https://forums.speedlife.net/u/Garick)\
**Post date:** [December 17, 2007, 6:42pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/58 "2007-12-17T18:42:41Z")

</div>

should be a fun car. Doing that kind of work wouldn’t be my idea of a good time but best of luck to you.

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 17, 2007, 6:50pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/59 "2007-12-17T18:50:30Z")

</div>

[http://video.google.com/videoplay?docid=4816643879392904273&q=lexus+V8+powered+corolla&total=3&start=0&num=10&so=0&type=search&plindex=0](http://video.google.com/videoplay?docid=4816643879392904273&q=lexus+V8+powered+corolla&total=3&start=0&num=10&so=0&type=search&plindex=0)

the lex motor is 40 lbs. heavier and about 8 inches longer than the 4AG that people normally put in any year corolla

---

<div class="post-metadata">

**Author:** ![SoloIIscoob](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SoloIIscoob](https://forums.speedlife.net/u/SoloIIscoob)\
**Post date:** [December 17, 2007, 6:53pm UTC](https://forums.speedlife.net/t/mad-l33t-purchase/40294/60 "2007-12-17T18:53:25Z")

</div>

> [@Garick](#):
>
> should be a fun car. Doing that kind of work wouldn’t be my idea of a good time but best of luck to you.

its not as terrible as you think. the transmission wont be pulled with the motors. just the motors themselves. i have a friend of mine who is a master mold maker with Mosler automotive who can make an aluminum bell housing adapter that matches up with each block.

the only thing i will swap out each time are the blocks themselves, the ECU/wires(which will be tucked/organized for easy removal/install) and fuel system minus pump/psi regulator.

the car is an 82, so its not like its got all the different wires/electronic devices that require wires like cars do today.

[Previous page](https://forums.speedlife.net/t/mad-l33t-purchase/40294.md?page=2)

[Next page](https://forums.speedlife.net/t/mad-l33t-purchase/40294.md?page=4)
