# Making some progress

**URL:** https://forums.speedlife.net/t/making-some-progress/170795
**Category:** PittSpeed Automotive
**Created:** [December 2, 2004, 7:04pm UTC](https://forums.speedlife.net/t/making-some-progress/170795 "2004-12-02T19:04:28Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 2, 2004, 7:04pm UTC](https://forums.speedlife.net/t/making-some-progress/170795/1 "2004-12-02T19:04:28Z")

</div>

Got the headers bolted up. Pretty easy when everything else is off the car. Plug access is niiiiiiiiice (well, at least for an LT1). Hopefully the copper gasket maker does its job on the slip tube. Slap the y-pipe on, then need to get the flange welded to the cat.

---

<div class="post-metadata">

### Author: ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 2, 2004, 7:06pm UTC](https://forums.speedlife.net/t/making-some-progress/170795/2 "2004-12-02T19:06:46Z")

</div>

cool, how was the headers over the steering arm and that one sensor out of head

---

<div class="post-metadata">

### Author: ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 3, 2004, 3:31am UTC](https://forums.speedlife.net/t/making-some-progress/170795/3 "2004-12-03T03:31:17Z")

</div>

> [@Quik](#):
>
> cool, how was the headers over the steering arm and that one sensor out of head

Just had to remove the plastic cover & it cleared since there was no #1 primary (it’s a slip tube).

They even cleared the oil filter. And I don’t have any sensors in the heads right now.

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 3, 2004, 4:02am UTC](https://forums.speedlife.net/t/making-some-progress/170795/4 "2004-12-03T04:02:47Z")

</div>

i’ll weld for u or see sailor,hes right down the road!

---

<div class="post-metadata">

### Author: ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 3, 2004, 9:21am UTC](https://forums.speedlife.net/t/making-some-progress/170795/5 "2004-12-03T09:21:54Z")

</div>

> [@8.1crew](#):
>
> i’ll weld for u or see sailor,hes right down the road!

Good idea!

Guess I’ll skip the duct tape then. :kekegay:

---

<div class="post-metadata">

### Author: ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)
#### Post date: [December 3, 2004, 9:38am UTC](https://forums.speedlife.net/t/making-some-progress/170795/6 "2004-12-03T09:38:02Z")

</div>

> [@8.1crew](#):
>
> i’ll weld for u or see sailor,hes right down the road!

come on down jeff!!!