# Mazda Made Turbo Proteges????

**URL:** <https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894>\
**Category:** NYSpeed Automotive\
**Created:** [December 20, 2005, 8:01am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894 "2005-12-20T08:01:54Z")\
**Posts on this page:** 17\
**Page:** 2

<div class="post-metadata">

**Author:** ![RobHimself](https://avatars.discourse-cdn.com/v4/letter/r/e480ec/32.png) [@RobHimself](https://forums.speedlife.net/u/RobHimself)\
**Post date:** [December 20, 2005, 12:08pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/21 "2005-12-20T12:08:43Z")

</div>

> [@JaysGreenLX](#):
>
> Mazda quotes it at 274hp. Evo competition? Just kidding.

I owuld put it against a legacy GT. Even thought im a scooby guy i bet it would be a faster car.

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [December 20, 2005, 12:11pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/22 "2005-12-20T12:11:35Z")

</div>

[http://www.msprotege.com/forum](http://www.msprotege.com/forum)

they are apparently fun cars… but not the most reliable motor around.

the Mazdaspeed 6 is 274fhp & awd. But is in NO WAY the same as the proteges. entirely different platforms.

---

<div class="post-metadata">

**Author:** ![JaysGreenLX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jaysgreenlx/32/7321_2.png) [@JaysGreenLX](https://forums.speedlife.net/u/JaysGreenLX)\
**Post date:** [December 20, 2005, 12:51pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/23 "2005-12-20T12:51:38Z")

</div>

> [@RobHimself](#):
>
> I owuld put it against a legacy GT. Even thought im a scooby guy i bet it would be a faster car.

Very likely. I don’t know the weights of the two cars but assuming they are even the MS6 should be a bit quicker. That would be pretty impressive.

---

<div class="post-metadata">

**Author:** ![neurokinetik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neurokinetik/32/7270_2.png) [@neurokinetik](https://forums.speedlife.net/u/neurokinetik)\
**Post date:** [December 20, 2005, 4:29pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/24 "2005-12-20T16:29:51Z")

</div>

> [@Zer0DazE](#):
>
> werd, the handling was similar to an itr from what i have read. either turn up the boost, or slap a disco potato on it and you have a fun car.

The engine would need some internal work for that. There isn’t alot of headroom for increased boost from what I have heard.

---

<div class="post-metadata">

**Author:** ![Bigairskier1580](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bigairskier1580/32/7612_2.png) [@Bigairskier1580](https://forums.speedlife.net/u/Bigairskier1580)\
**Post date:** [December 20, 2005, 9:39pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/25 "2005-12-20T21:39:33Z")

</div>

There’s an Orange on at my work. i don’t know who owns it though.

I can imagine it is pretty fun.

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [December 20, 2005, 10:11pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/26 "2005-12-20T22:11:52Z")

</div>

> [@beckington](#):
>
> I don’t see anything in the pics (especially the engine bay, that would say its turbo)

notice the heat sheild bulges forward pretty far, and the o2 sensor is off to the side … thats the turbo 😛

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [December 20, 2005, 10:34pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/27 "2005-12-20T22:34:44Z")

</div>

> [@neurokinetik](#):
>
> The engine would need some internal work for that. There isn’t alot of headroom for increased boost from what I have heard.

you are very correct my friend. the bottom end on the duratec’s are veryt weak. that motor is likely pushing a max of 7-8psi. any more and that thing will die in no time. cosworth makes some sick rods/pistons for it though along with a very nice intake manifold upgrade. that could easily see the high 300hp range.

---

<div class="post-metadata">

**Author:** ![JettaX](https://avatars.discourse-cdn.com/v4/letter/j/838e76/32.png) [@JettaX](https://forums.speedlife.net/u/JettaX)\
**Post date:** [December 21, 2005, 4:10am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/28 "2005-12-21T04:10:26Z")

</div>

My sister-in-law’s father has an 03 MSP and he liked it until he needed some warrenty service on it and could not find a dealer willing to work on it because they were not a “MAZDASPEED” dealer. Then in the mass confusion they smashed up the rear of his car and denied fault. He is still waiting on the outcome on that. I test drove one prior to getting the WRX and while it handled nicely i was not impressed with the car as a total package.

---

<div class="post-metadata">

**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\
**Post date:** [December 21, 2005, 5:06am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/29 "2005-12-21T05:06:27Z")

</div>

> [@focusinprogress](#):
>
> you are very correct my friend. the bottom end on the duratec’s are veryt weak. that motor is likely pushing a max of 7-8psi. any more and that thing will die in no time. cosworth makes some sick rods/pistons for it though along with a very nice intake manifold upgrade. that could easily see the high 300hp range.

really? its just a stock bottom end?  
i wouldnt think they would do that with a production car

---

<div class="post-metadata">

**Author:** ![Deuce](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deuce/32/7614_2.png) [@Deuce](https://forums.speedlife.net/u/Deuce)\
**Post date:** [December 21, 2005, 7:20am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/30 "2005-12-21T07:20:23Z")

</div>

those cars are pretty slick, i originally wanted one of them but i couldnt find one so i ended up getting the spec-v

edit- i remember reading somewhere that all you can safely expect out of the car without modding the engine is somewhere around 200-220ish whp

---

<div class="post-metadata">

**Author:** ![Juan](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@Juan](https://forums.speedlife.net/u/Juan)\
**Post date:** [December 21, 2005, 7:44am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/31 "2005-12-21T07:44:03Z")

</div>

> [@HotRodKid](#):
>
> notice the heat sheild bulges forward pretty far, and the o2 sensor is off to the side … thats the turbo 😛

:word: and what about the air filter? Turbo? My ass!

---

<div class="post-metadata">

**Author:** ![jrex](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrex/32/7232_2.png) [@jrex](https://forums.speedlife.net/u/jrex)\
**Post date:** [December 21, 2005, 9:57am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/32 "2005-12-21T09:57:47Z")

</div>

Every review I’ve heard also says that the proteges will take little to nothing over stock boost levels before blowing up. Also the Mazdaspeed6 is being marketed more as a luxo-sports car. It is marketed to be competing against the legacy gt rather than the evo/sti market.

Edit: I’m curious to see how far they can push it with the direct injection fuel system they put on the new 6.

---

<div class="post-metadata">

**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\
**Post date:** [December 21, 2005, 10:38am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/33 "2005-12-21T10:38:53Z")

</div>

> [@jrex](#):
>
> Every review I’ve heard also says that the proteges will take little to nothing over stock boost levels before blowing up. Also the Mazdaspeed6 is being marketed more as a luxo-sports car. It is marketed to be competing against the legacy gt rather than the evo/sti market.
> 
> Edit: I’m curious to see how far they can push it with the direct injection fuel system they put on the new 6.

it must be because i wasnt the one tuning it. i bet i can put down 300 to the wheels with one.  
🙂

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [December 21, 2005, 11:38am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/34 "2005-12-21T11:38:49Z")

</div>

Stock duratec bottom ends are already putting down 300+ whp. I’d have to dig for them, but there are two or three that I know of.

now if You swap out the cintered, cracked cap, powdered rods…

> [@Zer0DazE](#):
>
> it must be because i wasnt the one tuning it. i bet i can put down 300 to the wheels with one.  
> 🙂

i’m gonna be asking you to do just that, come springtime. 😉

---

<div class="post-metadata">

**Author:** ![Garick](https://avatars.discourse-cdn.com/v4/letter/g/8797f3/32.png) [@Garick](https://forums.speedlife.net/u/Garick)\
**Post date:** [December 21, 2005, 3:39pm UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/35 "2005-12-21T15:39:35Z")

</div>

> [@focusinprogress](#):
>
> you are very correct my friend. the bottom end on the duratec’s are veryt weak. that motor is likely pushing a max of 7-8psi. any more and that thing will die in no time. cosworth makes some sick rods/pistons for it though along with a very nice intake manifold upgrade. that could easily see the high 300hp range.

I could be wrong but I don’t think the MSP has a duratec engine…the MS6 does though

> Stock duratec bottom ends are already putting down 300+ whp. I’d have to dig for them, but there are two or three that I know of.

highboost I think has done it with a mazda 3.

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [December 22, 2005, 6:29am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/36 "2005-12-22T06:29:46Z")

</div>

> [@Garick](#):
>
> highboost I think has done it with a mazda 3.

also with a 6.  
marcy motorsports is nearing the 250whp range n/a.  
there is another… FocusSport iirc.

:gotme:

---

<div class="post-metadata">

**Author:** ![Skurge](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/skurge/32/7285_2.png) [@Skurge](https://forums.speedlife.net/u/Skurge)\
**Post date:** [December 23, 2005, 6:56am UTC](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894/37 "2005-12-23T06:56:21Z")

</div>

ooo a protege thread 🙂

yes the mazdaspeed are awesome cars, I know of two in the area, a girl near me has one, i’ll have to get her out for a meet ths summer, CF hood and trunk if you see a silver one around(not till spring)

the stock boost is about 7 psi, you can turn them safely up to 10-11 without troubles.

I just got a recall in the mail two days ago for the intake mani, i dunno if any of you remember when my intake mani came apart and trashed my head. bout time they changed it fro a tsb to recall :rolleyes:

the bottom ends on the protege is pretty good, the head suffers though

i forgot what magazine it was in but they did a top 100 handling cars and the mazdaspeed was pretty far up the list and was the only one on there under $30K

there are a few people out there putting 300+ to the wheels, doesn’t take a whole lot. but it is some custom work to be done

[Previous page](https://forums.speedlife.net/t/mazda-made-turbo-proteges/5894.md?page=1)
