# Me watches tumbleweed go through FWD forum...

**URL:** <https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839>\
**Category:** Canada Nissan Automotive\
**Created:** [April 19, 2005, 7:00am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839 "2005-04-19T07:00:08Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [April 19, 2005, 6:42pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/21 "2005-04-19T18:42:55Z")

</div>

Hahah. It’s ok, I was supposed to be an Alfred.

---

<div class="post-metadata">

**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\
**Post date:** [April 19, 2005, 7:21pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/22 "2005-04-19T19:21:16Z")

</div>

> [@SRBURG13](#):
>
> Hahah. It’s ok, I was supposed to be an Alfred.

Hahaha oh man. That would have been awesome Alf.

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [April 19, 2005, 8:20pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/23 "2005-04-19T20:20:30Z")

</div>

Hey Alfred? This is Batman…gimme your goddamn car - I have to go stop the Joker. 😃

---

<div class="post-metadata">

**Author:** ![1GAlty](https://avatars.discourse-cdn.com/v4/letter/1/a9adbd/32.png) [@1GAlty](https://forums.speedlife.net/u/1GAlty)\
**Post date:** [April 19, 2005, 9:56pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/24 "2005-04-19T21:56:42Z")

</div>

> [@DeathBy240](#):
>
> Hahaha. Dont break out the whip again Erin.

Oooh! Punish that bad boy! :love:whip  
Just keep your private lives out of this TECHNICAL forum 🤮 j/k lol

---

<div class="post-metadata">

**Author:** ![1GAlty](https://avatars.discourse-cdn.com/v4/letter/1/a9adbd/32.png) [@1GAlty](https://forums.speedlife.net/u/1GAlty)\
**Post date:** [April 19, 2005, 10:00pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/25 "2005-04-19T22:00:38Z")

</div>

> [@SRBURG13](#):
>
> But I saw that your pistons are in, eh?

Yeah, they are at the machine shop with the block now. Maybe I’ll start a thread about this project from hell so that PyreXXX will be happy.

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [April 19, 2005, 10:38pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/26 "2005-04-19T22:38:14Z")

</div>

As stated before, it’s my forum and I’ll cry if I want to. :E

But do go ahead and post up your miserable stories that others might learn from your misfortune. Or laugh their asses off, anyway. 🙂

---

<div class="post-metadata">

**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\
**Post date:** [April 20, 2005, 5:44am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/27 "2005-04-20T05:44:52Z")

</div>

The install went smoothly, some more vibration, throught the pedal area. But a much more solid feeling car. Shifts are much smoother, well worth the 34.81.

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [April 20, 2005, 9:34am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/28 "2005-04-20T09:34:59Z")

</div>

Nice! I’ve heard on the Spec that you’re less likely to misshift because the linkage doesn’t move with the engine when the MMI’s are in. We’ll see. 🙂

---

<div class="post-metadata">

**Author:** ![G20tdriver83](https://avatars.discourse-cdn.com/v4/letter/g/cab0a1/32.png) [@G20tdriver83](https://forums.speedlife.net/u/G20tdriver83)\
**Post date:** [April 21, 2005, 2:39pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/29 "2005-04-21T14:39:23Z")

</div>

Well, I’m running into some difficulty trying to get some motor mounts for my application.  
This is the closest I’ve gotten ( [http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store\_Code=CP&Product\_Code=7-1106G](http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=7-1106G) ), and from what I’ve been reading through the net they may not work for me for some reason.  
But my search continues.

Is it possible for me to just try get some measurements of my motor mounts and get some universal fit like motor mounts/inserts?

Jared are your Neons MMI application specific?

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [April 21, 2005, 3:53pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/30 "2005-04-21T15:53:08Z")

</div>

They should work…I bet it’s the exact same motor as the Sentra/200 Sx.

Anyway, I just got the car back from Speedworks - the MMI’s make a huge difference! You feel so much more connected to the car…and the idle vibration is mildly annoying, but a fairly small price to pay for no wheel hop. The shifter feels rock solid now, where as before it was a little vague.

---

<div class="post-metadata">

**Author:** ![1mns13](https://avatars.discourse-cdn.com/v4/letter/1/8491ac/32.png) [@1mns13](https://forums.speedlife.net/u/1mns13)\
**Post date:** [April 21, 2005, 4:25pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/31 "2005-04-21T16:25:29Z")

</div>

> [@G20tdriver83](#):
>
> Well, I’m running into some difficulty trying to get some motor mounts for my application.  
> This is the closest I’ve gotten ( [http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store\_Code=CP&Product\_Code=7-1106G](http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=7-1106G) ), and from what I’ve been reading through the net they may not work for me for some reason.  
> But my search continues.
> 
> Is it possible for me to just try get some measurements of my motor mounts and get some universal fit like motor mounts/inserts?
> 
> Jared are your Neons MMI application specific?

Mine were specific. they are engine and chassis specific. the mounts you found should work.

---

<div class="post-metadata">

**Author:** ![1GAlty](https://avatars.discourse-cdn.com/v4/letter/1/a9adbd/32.png) [@1GAlty](https://forums.speedlife.net/u/1GAlty)\
**Post date:** [April 21, 2005, 10:51pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/32 "2005-04-21T22:51:37Z")

</div>

I could not find any MMI for 93-97 Altima, so Cory at Speedworks suggested coating my existing mounts with urethane. I can’t wait to see how that turns out!

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [April 22, 2005, 6:47am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/33 "2005-04-22T06:47:35Z")

</div>

Some guys on the VBoard have done that with their Spec V’s instead of buying proper mounts, and they say it gives almost exactly the same effect as MMI’s. So, enjoy your lack of wheel hop! 😃

---

<div class="post-metadata">

**Author:** ![b14\_sr20det](https://avatars.discourse-cdn.com/v4/letter/b/ac8455/32.png) [@b14\_sr20det](https://forums.speedlife.net/u/b14_sr20det)\
**Post date:** [April 22, 2005, 7:16am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/34 "2005-04-22T07:16:12Z")

</div>

> [@G20tdriver83](#):
>
> Well, I’m running into some difficulty trying to get some motor mounts for my application.  
> This is the closest I’ve gotten ( [http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store\_Code=CP&Product\_Code=7-1106G](http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=7-1106G) ), and from what I’ve been reading through the net they may not work for me for some reason.  
> But my search continues.
> 
> Is it possible for me to just try get some measurements of my motor mounts and get some universal fit like motor mounts/inserts?
> 
> Jared are your Neons MMI application specific?

Well if you want to pay the money and intall new motor mounts instead of just inserts, here are some that should fit your application.  
[http://www.jgycustoms.com/serg20/underhood.htm](http://www.jgycustoms.com/serg20/underhood.htm)

Dan

---

<div class="post-metadata">

**Author:** ![G20tdriver83](https://avatars.discourse-cdn.com/v4/letter/g/cab0a1/32.png) [@G20tdriver83](https://forums.speedlife.net/u/G20tdriver83)\
**Post date:** [April 22, 2005, 9:05am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/35 "2005-04-22T09:05:11Z")

</div>

> [@b14\_sr20det](#):
>
> Well if you want to pay the money and intall new motor mounts instead of just inserts, here are some that should fit your application.  
> [JGYCustoms.com - SE-R / G20 / NX Engine Bolt-Ons and Underhood Parts](http://www.jgycustoms.com/serg20/underhood.htm)
> 
> Dan

Thanks for the heads up with that link. I’ve seen them and tried to e-mail Place Racing themselves about them. They do seem to carry a hefty price weight with them, so I’m still looking into trying to get some motor mount inserts. I’ve got a lead with possibly buying the se-r one’s from ES and thing modifying them with some sort of windshield gasket or soem. Still have to try track that down though.

2000 Sentra SE with a det swap? (just judging by your name there)

---

<div class="post-metadata">

**Author:** ![b14\_sr20det](https://avatars.discourse-cdn.com/v4/letter/b/ac8455/32.png) [@b14\_sr20det](https://forums.speedlife.net/u/b14_sr20det)\
**Post date:** [April 22, 2005, 9:17am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/36 "2005-04-22T09:17:26Z")

</div>

1998 200sx se-r with a sr20det swap. In the process of swapping in a gt28rs turbo, should be in by this weekend.

what is your setup?

Dan

---

<div class="post-metadata">

**Author:** ![pulsardet](https://avatars.discourse-cdn.com/v4/letter/p/c68b51/32.png) [@pulsardet](https://forums.speedlife.net/u/pulsardet)\
**Post date:** [April 24, 2005, 2:26pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/37 "2005-04-24T14:26:00Z")

</div>

b14\_sr20det Cam in Red deer did the work on your car didnt he? He’s got my Pulsar there right now. Motor is being pulled Wednesday for new bottom end, and is also piping my front mount. He is gonna tune my stand alone to once he orders it.

---

<div class="post-metadata">

**Author:** ![b14\_sr20det](https://avatars.discourse-cdn.com/v4/letter/b/ac8455/32.png) [@b14\_sr20det](https://forums.speedlife.net/u/b14_sr20det)\
**Post date:** [April 24, 2005, 4:53pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/38 "2005-04-24T16:53:15Z")

</div>

yeh, he’s the one that tuned my car, I’ll be sending it there soon.

---

<div class="post-metadata">

**Author:** ![G20tdriver83](https://avatars.discourse-cdn.com/v4/letter/g/cab0a1/32.png) [@G20tdriver83](https://forums.speedlife.net/u/G20tdriver83)\
**Post date:** [May 21, 2005, 10:48am UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/39 "2005-05-21T10:48:34Z")

</div>

just wanted to follow up on people’s motor mounts. how do they feel now? The vibrations still okay? or have they made you develope a certain tick while in slow moving traffic?

And as for my troubles, G20 mounts are larger then other SR20 mounts, so I’ll have to be going altima man’s route as well. 1GAlty I was wondering if you have a quick reference for the size or photos of motor mounts on your type of car?

Having said that, I ordered one prothane mount that stil hasn’t come in at Mopac, but when it does come it I’ll probably be putting it for sale… ahh well.

Oh just an OT link, here is a link to an Altima build.  
[http://www.angelfire.com/or3/factoryfreaks/](http://www.angelfire.com/or3/factoryfreaks/)

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [May 21, 2005, 4:08pm UTC](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839/40 "2005-05-21T16:08:47Z")

</div>

My mounts are great. The car scoots off the line a little better now that the engine isn’t trying to catapult itself out of the engine bay, and the only time the vibrations are REALLY annoying is when you’re sitting at a stoplight with the A/C on, which I don’t do very often.

Other than that, just pretend you’re at a stoplight in a Neon - same vibrations there with the stock mounts. 😃

[Previous page](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839.md?page=1)

[Next page](https://forums.speedlife.net/t/me-watches-tumbleweed-go-through-fwd-forum/138839.md?page=3)
