# megan manifold

**URL:** <https://forums.speedlife.net/t/megan-manifold/140633>\
**Category:** Canada Nissan Automotive\
**Created:** [November 17, 2005, 9:36pm UTC](https://forums.speedlife.net/t/megan-manifold/140633 "2005-11-17T21:36:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Speed\_Dreams](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@Speed\_Dreams](https://forums.speedlife.net/u/Speed_Dreams)\
**Post date:** [November 17, 2005, 9:36pm UTC](https://forums.speedlife.net/t/megan-manifold/140633/1 "2005-11-17T21:36:31Z")

</div>

i just got my megan manifold (props to JDMwest) and its a beautiful peice just wondering what the specs are to torque this mother down at were? i don’t wanna mess anything up

Drew

---

<div class="post-metadata">

**Author:** ![PyreXXX](https://avatars.discourse-cdn.com/v4/letter/p/bbe5ce/32.png) [@PyreXXX](https://forums.speedlife.net/u/PyreXXX)\
**Post date:** [November 18, 2005, 9:35am UTC](https://forums.speedlife.net/t/megan-manifold/140633/2 "2005-11-18T09:35:38Z")

</div>

KA-T manifold or sr20? Check the FSM, it should give you some idea of what to do with it.

---

<div class="post-metadata">

**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\
**Post date:** [November 18, 2005, 6:59pm UTC](https://forums.speedlife.net/t/megan-manifold/140633/3 "2005-11-18T18:59:08Z")

</div>

torque specs are…

37-48 (3.8-4.9, 27-35)  
Nm Kg-m Ft-lb

and specs on the 4 turbo bolts are…

22-29 (2.2-3.0, 16-22)  
Nm Kg-m Ft-lb

u really dont NEED torque specs u can usually feel when they are tight and its kinda hard to get a torque wrench in to tighten the manifold bolts on the motor but u can giver a try.

---

<div class="post-metadata">

**Author:** ![Speed\_Dreams](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@Speed\_Dreams](https://forums.speedlife.net/u/Speed_Dreams)\
**Post date:** [November 18, 2005, 8:20pm UTC](https://forums.speedlife.net/t/megan-manifold/140633/4 "2005-11-18T20:20:31Z")

</div>

thank you

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [November 18, 2005, 11:16pm UTC](https://forums.speedlife.net/t/megan-manifold/140633/5 "2005-11-18T23:16:05Z")

</div>

> [@silvia\_sr20det\_s13](#):
>
> u really dont NEED torque specs u can usually feel when they are tight and its kinda hard to get a torque wrench in to tighten the manifold bolts on the motor but u can giver a try.

Crow feet wrenchs are nice, they allow you to reach all the bolts but as long as they are all simmilar in torque they are fine.