# Meh **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [March 8, 2008, 7:01pm UTC](https://forums.speedlife.net/t/meh/44668 "2008-03-08T19:01:04Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [March 8, 2008, 7:01pm UTC](https://forums.speedlife.net/t/meh/44668/1 "2008-03-08T19:01:04Z")
Ign problems higher than ~16 lbs…it was doing the same shit last time I dynoed it, I think the dist. coil is shot. Couldn’t get any clean passes due to the missing above 7k, and you can see this run wasn’t all that smooth either. Cars are gay. Graph @ 15 lbs on the new mani and 35R, 93 oct. Maybe in another 2 yrs ill take it to the track, fix the dist, turn it up to 25psi and get my 10 sec slip. ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [March 8, 2008, 7:02pm UTC](https://forums.speedlife.net/t/meh/44668/2 "2008-03-08T19:02:13Z")
holy shit you actually touched it? ---
**Author:** ![articzap](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/articzap/32/7361_2.png) [@articzap](https://forums.speedlife.net/u/articzap)\ **Post date:** [March 8, 2008, 7:02pm UTC](https://forums.speedlife.net/t/meh/44668/3 "2008-03-08T19:02:39Z")
Damn. Sucks about the whole ignition problem. Get it fixed. ---
**Author:** ![Shrives](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrives/32/7250_2.png) [@Shrives](https://forums.speedlife.net/u/Shrives)\ **Post date:** [March 8, 2008, 7:03pm UTC](https://forums.speedlife.net/t/meh/44668/4 "2008-03-08T19:03:30Z")
nice :tup: ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [March 8, 2008, 7:04pm UTC](https://forums.speedlife.net/t/meh/44668/5 "2008-03-08T19:04:14Z")
weak ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [March 8, 2008, 7:04pm UTC](https://forums.speedlife.net/t/meh/44668/6 "2008-03-08T19:04:19Z")
yah…put in race gas and couldn’t even use it properly cuz of the stupid ign. my hoodie smells so good tho haha ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [March 8, 2008, 7:07pm UTC](https://forums.speedlife.net/t/meh/44668/7 "2008-03-08T19:07:53Z")
oh boy, lol bring it back to buff running good ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [March 8, 2008, 7:31pm UTC](https://forums.speedlife.net/t/meh/44668/8 "2008-03-08T19:31:32Z")
not familiar at all with your set up, but maybe coilpacks would work better? ---
**Author:** ![Locutus](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/locutus/32/7574_2.png) [@Locutus](https://forums.speedlife.net/u/Locutus)\ **Post date:** [March 8, 2008, 7:42pm UTC](https://forums.speedlife.net/t/meh/44668/9 "2008-03-08T19:42:35Z")
errr. back from the dead :tup: get er running ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 8, 2008, 8:18pm UTC](https://forums.speedlife.net/t/meh/44668/10 "2008-03-08T20:18:44Z")
Nice numbers, interesting seeing an engine dyno rather than chassis. That’s some weak sauce torque… lol just kiddin. What afr’s? What gap on the plugs? What compression? Just do yourself a favor and put that shit on the dsm; make some torque, have awd, win-win. ---
**Author:** ![rj-92](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rj-92/32/7310_2.png) [@rj-92](https://forums.speedlife.net/u/rj-92)\ **Post date:** [March 8, 2008, 8:32pm UTC](https://forums.speedlife.net/t/meh/44668/11 "2008-03-08T20:32:21Z")
Are those 2" primaries? They aren’t small that’s for sure! ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [March 8, 2008, 11:49pm UTC](https://forums.speedlife.net/t/meh/44668/12 "2008-03-08T23:49:55Z")
Gary – see sig AF’s are in the 11’s, plug gap was .20-.30, it didn’t really matter, im 95% sure its distributor related Jam i’d have to go AEM and drop a lot more time and money going with coilpacks. Im using an AVCR boost controller but i might pull that off and use Neptune to control boost by gear and all that…it seems really laggy to me, and even tho it was raining today when i did a few pulls, it felt really really slow to me shrug. fucking pos hondas ---
**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\ **Post date:** [March 9, 2008, 9:17am UTC](https://forums.speedlife.net/t/meh/44668/13 "2008-03-09T09:17:37Z")
aem standalone? have you looked into megasquirt? i know of a lot of e30 guys who easily converted to coilpacks for their b00sted ap’s with ms… the complete built ms setup with wiring harness and everything you need is a bit over $400 last i checked. just sayin, it might be something you would want to look into ---
**Author:** ![Joe](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joe/32/7219_2.png) [@Joe](https://forums.speedlife.net/u/Joe)\ **Post date:** [March 9, 2008, 10:25am UTC](https://forums.speedlife.net/t/meh/44668/14 "2008-03-09T10:25:30Z")
looks like a supra hp curve…that thing has gotta be a beast from a roll when its running properly ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [March 9, 2008, 11:31am UTC](https://forums.speedlife.net/t/meh/44668/15 "2008-03-09T11:31:52Z")
> [@Toda Party](#): > > Gary – see sig > > AF’s are in the 11’s, plug gap was .20-.30, it didn’t really matter, im 95% sure its distributor related > > Jam i’d have to go AEM and drop a lot more time and money going with coilpacks. > > Im using an AVCR boost controller but i might pull that off and use Neptune to control boost by gear and all that…it seems really laggy to me, and even tho it was raining today when i did a few pulls, it felt really really slow to me > > shrug. fucking pos hondas Toda I was just messing around. I know you know your stuff, especially plugs, I was just trying to help. I did see your sig…but don’t understand the significance. Do some maintence, I mean compared to a honda that’s probably only got 3000miles in 3years it will be worse off as far as maintence. ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [March 10, 2008, 6:25am UTC](https://forums.speedlife.net/t/meh/44668/16 "2008-03-10T06:25:03Z")
Not going megasquirt…running on neptune now, its an obd1 honda eeprom hack prog…on board logging and all kinds of goodies. CoP might come down the road, but I don’t have the time, money, or facilities to do that at the moment. The main thing was to get it running again after 2 years, possibly to sell it, but not likely. Gary - i was just fucking with you too. But like I said, I don’t have time or $$ now, last thing I need is a broken dsm on top of a semi working turbo honda haha. It’s fast enough as it is, I drive like an old man these days anyway. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [April 2, 2008, 12:57pm UTC](https://forums.speedlife.net/t/meh/44668/17 "2008-04-02T12:57:49Z")
Up for pics of the new mani installed! ---
**Author:** ![Inn-Tune](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/inn-tune/32/7588_2.png) [@Inn-Tune](https://forums.speedlife.net/u/Inn-Tune)\ **Post date:** [April 2, 2008, 4:26pm UTC](https://forums.speedlife.net/t/meh/44668/18 "2008-04-02T16:26:39Z")
go down the list like the old days… log battery voltage while doing a pull plugs wires grounds ignitor distrib vac. lines etc. Get it going man. I want to see it. 🙂 -Mike ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [April 3, 2008, 5:00am UTC](https://forums.speedlife.net/t/meh/44668/19 "2008-04-03T05:00:04Z")
get it on the road or i will have you deported ---
**Author:** ![Oroc](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@Oroc](https://forums.speedlife.net/u/Oroc)\ **Post date:** [April 3, 2008, 5:03am UTC](https://forums.speedlife.net/t/meh/44668/20 "2008-04-03T05:03:36Z")
straight :pimp: [Next page](https://forums.speedlife.net/t/meh/44668.md?page=2)