# memory
**URL:** https://forums.speedlife.net/t/memory/54400
**Category:** NYSpeed Off Topic
**Created:** [September 4, 2008, 7:49pm UTC](https://forums.speedlife.net/t/memory/54400 "2008-09-04T19:49:19Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 4, 2008, 7:49pm UTC](https://forums.speedlife.net/t/memory/54400/1 "2008-09-04T19:49:19Z")
i need some new memory since my computer has intermittent bad memory so i want to buy 2 1gb sticks of memory to see where the problem is. does anyone have any recommendations on memory?
this is what i have now
4 sticks of 1gb
> **[G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)...](https://www.newegg.com/Product/Product.aspx?Item=N82E16820231098)**
>
> BuyG.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-2GBNQwith fast shipping and top-rated customer service.Once you know, you Newegg!
i might just buy this again since it is a good price but just seein whats out there
---
### Author:  [@ryanmcell](https://forums.speedlife.net/u/ryanmcell)
#### Post date: [September 4, 2008, 8:48pm UTC](https://forums.speedlife.net/t/memory/54400/2 "2008-09-04T20:48:00Z")
Are you running 64 bit? If not, no use for that extra ram.
I’ve never had a problem with Crucial or Kingston (even the value packs).
---
### Author:  [@EazyELives1995](https://forums.speedlife.net/u/EazyELives1995)
#### Post date: [September 4, 2008, 8:49pm UTC](https://forums.speedlife.net/t/memory/54400/3 "2008-09-04T20:49:36Z")
u can get same quality for cheaper from tigerdirect
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 4, 2008, 8:53pm UTC](https://forums.speedlife.net/t/memory/54400/4 "2008-09-04T20:53:44Z")
That ram is good…
Or this
> **[G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)...](https://www.newegg.com/Product/Product.aspx?Item=N82E16820231087)**
>
> BuyG.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-2GBPKwith fast shipping and top-rated customer service.Once you know, you Newegg!
Or any corsair. They have some 2x1 kits that are 4-4-4-12 for cheap somewhere on the site… But you need to manually set it to 4-4-4-12 most times.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 5, 2008, 11:37am UTC](https://forums.speedlife.net/t/memory/54400/5 "2008-09-05T11:37:02Z")
> [@ryanmcell](#):
>
> Are you running 64 bit? If not, no use for that extra ram.
>
> I’ve never had a problem with Crucial or Kingston (even the value packs).
yes 64bit
---
### Author:  [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)
#### Post date: [September 5, 2008, 11:50am UTC](https://forums.speedlife.net/t/memory/54400/6 "2008-09-05T11:50:09Z")
hmmm, have you tried to do an RMA for it? I have that same memory and very happy with it.
maybe just pickup some cheapo memory from best buy and return it once you know which stick is bad?
memtestx86 will tell you what’s bad too if I recall
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 5, 2008, 7:49pm UTC](https://forums.speedlife.net/t/memory/54400/7 "2008-09-05T19:49:02Z")
> [@Dr.Stevil](#):
>
> hmmm, have you tried to do an RMA for it? I have that same memory and very happy with it.
>
> maybe just pickup some cheapo memory from best buy and return it once you know which stick is bad?
>
> memtestx86 will tell you what’s bad too if I recall
yea i used memtext86 but when i did a scan everything was fine
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 5, 2008, 8:01pm UTC](https://forums.speedlife.net/t/memory/54400/8 "2008-09-05T20:01:38Z")
> [@Tunerfreak](#):
>
> yea i used memtext86 but when i did a scan everything was fine
Did you run the version that runs in DOS?
I believe there is a version that runs in windows, and it cant fully test the mem as some of it is used. And to ensure stability, you need to run it for a day or more, at least 10 passes. On 4gb that can take a while. If it passes that it is stable, and its not the ram.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 5, 2008, 8:31pm UTC](https://forums.speedlife.net/t/memory/54400/9 "2008-09-05T20:31:17Z")
i think it was the DOS one i ran cause i created a image file and put it on a cd and ran it on start up
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 6, 2008, 8:09pm UTC](https://forums.speedlife.net/t/memory/54400/10 "2008-09-06T20:09:17Z")
i retested the memory waiting for 9 passes and no errors. found this link about increasing the voltage to the mem
[http://www.megaszu.com/blog/2007/02/vista-memorymanagement-blue-screen.html](http://www.megaszu.com/blog/2007/02/vista-memorymanagement-blue-screen.html)
but i did that and i still get the same error so now i dont know
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 6, 2008, 9:37pm UTC](https://forums.speedlife.net/t/memory/54400/11 "2008-09-06T21:37:26Z")
If you made 9 passes, its very likely the memory is good…
Is this a intel rig? It could be the NB is heating from prolonged use and poor air flow, that will lead to massive system instability. The way to test that would be run a program like OCCT or Prime95 in blend mode, tests the CPU at 100% with different fft’s and the mem at the same time. If you make it past a hour its probably fine, but a truly stable system will do 12+ hours.
Any idea what temps the NB runs at? Is the rig overclocked at all? Even at stock clocks, cheap mobos overheat and are not stable.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 7, 2008, 10:42am UTC](https://forums.speedlife.net/t/memory/54400/12 "2008-09-07T10:42:03Z")
nothing is overclocked and no i dont know what the temp of the NB is. i cant believe it would be getting that hot i have 5 fans on my case
---
### Author:  [@JustinH](https://forums.speedlife.net/u/JustinH)
#### Post date: [September 7, 2008, 10:58am UTC](https://forums.speedlife.net/t/memory/54400/13 "2008-09-07T10:58:44Z")
There is a linux version of memtest86 on the ultimate boot disc, I use that.
Ram is so cheap now its amazing.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 7, 2008, 11:07am UTC](https://forums.speedlife.net/t/memory/54400/14 "2008-09-07T11:07:09Z")
i ran prime95 and it ran for 6 min until it found an error. error was
rounding was 0.5, expected less than 0.4
Hardware Failure detected
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 7, 2008, 11:25am UTC](https://forums.speedlife.net/t/memory/54400/15 "2008-09-07T11:25:45Z")
> [@Tunerfreak](#):
>
> i ran prime95 and it ran for 6 min until it found an error. error was
>
> rounding was 0.5, expected less than 0.4
> Hardware Failure detected
WOW…
6 mins? Im impressed you didnt have more problems.
The amount of fans in a case dosent mean much. Download speedfan and figure out what the temp of the NB is under full prime load. Run all cores at 100% under blend, and small fft’s and see which one fails first.
If the small FFT’s fails significantly after the blend mode, or dosent fail after 1H+, and blend does… Its very likely its a memory problem. But thats likely from a crappy or defective mobo, or the NB overheating.
Can you manually set the memory divider in the BIOS? Set it to 1:1. It puts less strain on the NB. Timings are all stock, voltages are all set to AUTO or stock? You can try to add .1v to the mem and see if that helps.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 7, 2008, 12:02pm UTC](https://forums.speedlife.net/t/memory/54400/16 "2008-09-07T12:02:13Z")
which one is the temp of the NB they all say temp?
i did increase the voltage .1v last night and it still crashed a little while after but has not crashed today yet
edit:
just crashed
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 7, 2008, 1:12pm UTC](https://forums.speedlife.net/t/memory/54400/17 "2008-09-07T13:12:15Z")
> [@Tunerfreak](#):
>
> which one is the temp of the NB they all say temp?
>
> i did increase the voltage .1v last night and it still crashed a little while after but has not crashed today yet
>
> edit:
> just crashed
Well its probably going to be hard to figgure out then if theyre not labeled stock.
Feel the chipset on the mobo, if you cant touch it its too hot. If its just warm or cold, then you could have other issues. Is the ram hot?
Has it always been doing this?
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 7, 2008, 5:10pm UTC](https://forums.speedlife.net/t/memory/54400/18 "2008-09-07T17:10:29Z")
from hottest to coldest i would say it goes like this
NB \> mem (but not by much) \> CPU
NB is pretty warm to the touch but not where i cant touch it
yes it has always done this
---
### Author:  [@ZOMGVTEK](https://forums.speedlife.net/u/ZOMGVTEK)
#### Post date: [September 7, 2008, 6:54pm UTC](https://forums.speedlife.net/t/memory/54400/19 "2008-09-07T18:54:35Z")
It could be a bad mobo, or some settings are way off somehow…
Leaning towards bad mobo. Theres far too many variables, a bunch of those are covered now, but if the mobo is under 1yr old and you got it from newegg, they will replace it.
---
### Author:  [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)
#### Post date: [September 7, 2008, 8:34pm UTC](https://forums.speedlife.net/t/memory/54400/20 "2008-09-07T20:34:39Z")
looked over the supported mem of my board again and i may have found they problem…its not supported
i could have sworn it was