# metall break

**URL:** <https://forums.speedlife.net/t/metall-break/185903>\
**Category:** PittSpeed Automotive\
**Created:** [October 29, 2006, 7:40am UTC](https://forums.speedlife.net/t/metall-break/185903 "2006-10-29T07:40:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nvrtolo4me](https://avatars.discourse-cdn.com/v4/letter/n/e274bd/32.png) [@nvrtolo4me](https://forums.speedlife.net/u/nvrtolo4me)\
**Post date:** [October 29, 2006, 7:40am UTC](https://forums.speedlife.net/t/metall-break/185903/1 "2006-10-29T07:40:45Z")

</div>

anybody have a metal break that is wide enoughf to do 55 inches? i want to build a sheet metal dash for my s-10 and would like to bend it in one piece.

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [October 29, 2006, 7:44am UTC](https://forums.speedlife.net/t/metall-break/185903/2 "2006-10-29T07:44:23Z")

</div>

[http://www.dominationchassis.com/](http://www.dominationchassis.com/)  
i think

---

<div class="post-metadata">

**Author:** ![STEELCITYEVO8](https://avatars.discourse-cdn.com/v4/letter/s/d9b06d/32.png) [@STEELCITYEVO8](https://forums.speedlife.net/u/STEELCITYEVO8)\
**Post date:** [November 3, 2006, 1:29pm UTC](https://forums.speedlife.net/t/metall-break/185903/3 "2006-11-03T13:29:40Z")

</div>

we have a hydraulic metal break bends up to 10ft.

---

<div class="post-metadata">

**Author:** ![nvrtolo4me](https://avatars.discourse-cdn.com/v4/letter/n/e274bd/32.png) [@nvrtolo4me](https://forums.speedlife.net/u/nvrtolo4me)\
**Post date:** [November 4, 2006, 3:27pm UTC](https://forums.speedlife.net/t/metall-break/185903/4 "2006-11-04T15:27:18Z")

</div>

well i started to bend it using the work bench so i’ll see how this one turns out if it looks like shit would i be able to come out and use yours?

---

<div class="post-metadata">

**Author:** ![STEELCITYEVO8](https://avatars.discourse-cdn.com/v4/letter/s/d9b06d/32.png) [@STEELCITYEVO8](https://forums.speedlife.net/u/STEELCITYEVO8)\
**Post date:** [November 4, 2006, 4:05pm UTC](https://forums.speedlife.net/t/metall-break/185903/5 "2006-11-04T16:05:30Z")

</div>

i am sure something could be arranged if u need it. what gauge steel are u using. the break is more than capable i believe it is capable to bend up to 1/4 inch plate