# MIG Welder **URL:** \ **Category:** Classifieds\ **Created:** [January 24, 2011, 8:42am UTC](https://forums.speedlife.net/t/mig-welder/208486 "2011-01-24T08:42:35Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![fv8s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fv8s/32/5925_2.png) [@fv8s](https://forums.speedlife.net/u/fv8s)\ **Post date:** [January 24, 2011, 8:42am UTC](https://forums.speedlife.net/t/mig-welder/208486/1 "2011-01-24T08:42:35Z")
I would like to borrow a MIG Welder for a couple of days to weld things in my engine bay. I will give you my house address and number and can pick up the welder. Please PM me with any offers I would like to get started on this project. ---
**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\ **Post date:** [January 24, 2011, 2:11pm UTC](https://forums.speedlife.net/t/mig-welder/208486/2 "2011-01-24T14:11:29Z")
hairymonkey still has speedpeds welder as far as i know. message him haha ---
**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\ **Post date:** [January 24, 2011, 4:06pm UTC](https://forums.speedlife.net/t/mig-welder/208486/3 "2011-01-24T16:06:44Z")
not sure if theres any tool rental places near you, but lakeshore hardware near my fathers over off route 5 in hamburg rents them super cheap… i just wish they would just get a fucking tig already…lol… ---
**Author:** ![fv8s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fv8s/32/5925_2.png) [@fv8s](https://forums.speedlife.net/u/fv8s)\ **Post date:** [January 24, 2011, 4:11pm UTC](https://forums.speedlife.net/t/mig-welder/208486/4 "2011-01-24T16:11:05Z")
Roughly how cheap and for how long? ---
**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\ **Post date:** [January 24, 2011, 4:22pm UTC](https://forums.speedlife.net/t/mig-welder/208486/5 "2011-01-24T16:22:17Z")
[http://lakeshorehdwr.com/Rental%20List%20-%20Dec2010.pdf](http://lakeshorehdwr.com/Rental%20List%20-%20Dec2010.pdf) honestly if you get it on a weekend when therye gonna be closed the next day theyve always hooked me up with some sort of deal… therye my metric bolt place, they usually have or can get me anything…lol… yet they still wont disclose who they shop from…lol… ---------- Post added at 07:22 PM ---------- Previous post was at 07:18 PM ---------- or if you want it tig’d find zero on here, hes been doing it long enough im having him do my tigging till i get one… ---
**Author:** ![Hass](https://avatars.discourse-cdn.com/v4/letter/h/51bf81/32.png) [@Hass](https://forums.speedlife.net/u/Hass)\ **Post date:** [January 24, 2011, 5:26pm UTC](https://forums.speedlife.net/t/mig-welder/208486/6 "2011-01-24T17:26:49Z")
Nearly any weld shop will rent out a machine and gas. Anywho, I have a miller trailblazer 302 I can bring by if you could line everything up… then you can do the welding or I can, i don’t give a fuck. typical engine driven stick/mig/tig setups, and hf module for AC on alum/mag if that’s your cup of tea. I don’t wish to leave it there, because this machine + setup cost over 8k… and I’m not very trusting :] But if you have shit lined up, I can bring it by if you can’t find someone else or have problems getting a rental. HF has cheap shit too by the way, around $100-150 for a cheapcheapcheapcheap gasless MIG. Although I’m not sure of it’s quality to weld things that your life may depend on 🙂 ---
**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\ **Post date:** [January 24, 2011, 5:28pm UTC](https://forums.speedlife.net/t/mig-welder/208486/7 "2011-01-24T17:28:36Z")
you got a tig? arent you the guy i sold some wire to or something back at the shop? wanna come out some day and let me weld some shit for some money? ---
**Author:** ![Hass](https://avatars.discourse-cdn.com/v4/letter/h/51bf81/32.png) [@Hass](https://forums.speedlife.net/u/Hass)\ **Post date:** [January 24, 2011, 5:47pm UTC](https://forums.speedlife.net/t/mig-welder/208486/8 "2011-01-24T17:47:24Z")
Hmm, what shop? I usually don’t buy any consumables/wires because they’re so expensive locally. and yea, the Miller TB302 is a multiprocess engine drive for Stick/TIG/MIG/CAC ---
**Author:** ![yunvme666](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yunvme666/32/5065_2.png) [@yunvme666](https://forums.speedlife.net/u/yunvme666)\ **Post date:** [January 24, 2011, 5:50pm UTC](https://forums.speedlife.net/t/mig-welder/208486/9 "2011-01-24T17:50:25Z")
na i think you came out and got some 0/1 gauge wire off me from work one day, i sold someone on here a bunch cheap just to get it out of my way…lol… out in hamburg on camp… ---
**Author:** ![fv8s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fv8s/32/5925_2.png) [@fv8s](https://forums.speedlife.net/u/fv8s)\ **Post date:** [January 24, 2011, 6:25pm UTC](https://forums.speedlife.net/t/mig-welder/208486/10 "2011-01-24T18:25:42Z")
I just need holes welded in my engine bay. That one fr rent is decently priced, maybe I will check it out. > [@yunvme666](#): > > [Hardware Store, Equipment Rental & Repair: Hamburg, NY: Lakeshore Hardware & Tool Rental](http://lakeshorehdwr.com/Rental%20List%20-%20Dec2010.pdf) honestly if you get it on a weekend when therye gonna be closed the next day theyve always hooked me up with some sort of deal… therye my metric bolt place, they usually have or can get me anything…lol… yet they still wont disclose who they shop from…lol… > > ---------- Post added at 07:22 PM ---------- Previous post was at 07:18 PM ---------- > > or if you want it tig’d find zero on here, hes been doing it long enough im having him do my tigging till i get one… ---
**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\ **Post date:** [January 25, 2011, 2:59pm UTC](https://forums.speedlife.net/t/mig-welder/208486/11 "2011-01-25T14:59:47Z")
> [@Arch Angel](#): > > hairymonkey still has speedpeds welder as far as i know. message him haha yes the asshole still does, cops didnt do shit, still know where his rents live too ---
**Author:** ![Hass](https://avatars.discourse-cdn.com/v4/letter/h/51bf81/32.png) [@Hass](https://forums.speedlife.net/u/Hass)\ **Post date:** [January 25, 2011, 5:35pm UTC](https://forums.speedlife.net/t/mig-welder/208486/12 "2011-01-25T17:35:57Z")
> [@yunvme666](#): > > na i think you came out and got some 0/1 gauge wire off me from work one day, i sold someone on here a bunch cheap just to get it out of my way…lol… out in hamburg on camp… ahh yep that was me! =D ---
**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\ **Post date:** [January 26, 2011, 2:28pm UTC](https://forums.speedlife.net/t/mig-welder/208486/13 "2011-01-26T14:28:12Z")
> [@speedped79](#): > > yes the asshole still does, cops didnt do shit, still know where his rents live too Time to kick down a door and repo that thing, some ppl have some nerve ---
**Author:** ![fv8s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fv8s/32/5925_2.png) [@fv8s](https://forums.speedlife.net/u/fv8s)\ **Post date:** [January 26, 2011, 8:21pm UTC](https://forums.speedlife.net/t/mig-welder/208486/14 "2011-01-26T20:21:14Z")
I may have found a welder, I will keep everyone updated. ---
**Author:** ![fv8s](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fv8s/32/5925_2.png) [@fv8s](https://forums.speedlife.net/u/fv8s)\ **Post date:** [March 12, 2011, 11:50am UTC](https://forums.speedlife.net/t/mig-welder/208486/15 "2011-03-12T11:50:07Z")
I borrowed a welder, but still need to finish a few more holes, anyone else have one?