# Mike's Sol

**URL:** <https://forums.speedlife.net/t/mikes-sol/235240>\
**Category:** Builds\
**Created:** [December 13, 2007, 3:55pm UTC](https://forums.speedlife.net/t/mikes-sol/235240 "2007-12-13T15:55:54Z")\
**Posts on this page:** 1\
**Showing post:** 758

<div class="post-metadata">

**Author:** ![Boxersix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxersix/32/6327_2.png) [@Boxersix](https://forums.speedlife.net/u/Boxersix)\
**Post date:** [November 18, 2010, 5:14pm UTC](https://forums.speedlife.net/t/mikes-sol/235240/758 "2010-11-18T17:14:06Z")

</div>

> [@FS: 1995 Nissan 240sx \*new price\*](https://forums.speedlife.net/t/fs-1995-nissan-240sx-new-price/37295/6):
>
> gotcha. thanks. This will be a huge help. the house is almost entirely on one 15amp breaker. The entire downstairs goes out when I blow it.
> 
> There are more breakers on the panel up to 30amps. If I can just find where that outlet is I’ll be all set.

Your best bet so you don’t go burning shit down is if the panel has an extra slot or two, go ahead and wire in a separate breaker for the cutter. It’s not that hard to do, probably cost you $50-$60 in romex and breakers/outlets/etc…I imagin the main is probably a 200 amp service.

Find what the max draw of the cutter is. if’s it 20amp, wire in a 25amp breaker. house current type cutter and welders typically won’t draw more than 20amps.

---

_[View the full topic](https://forums.speedlife.net/t/mikes-sol/235240)._