# Misc Parts & Tools **URL:** \ **Category:** Classifieds\ **Created:** [February 1, 2011, 7:32pm UTC](https://forums.speedlife.net/t/misc-parts-tools/208776 "2011-02-01T19:32:25Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![FourEyed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foureyed/32/7216_2.png) [@FourEyed](https://forums.speedlife.net/u/FourEyed)\ **Post date:** [February 1, 2011, 7:32pm UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/1 "2011-02-01T19:32:25Z")
4" QTP electric Cutout, summit p/n QTEC40, never used. Just so buyer is aware it is listed as a 4" cutout, but the blade measures about 3 3/8" the flange is 4". $195 in Summit, sell for $150. ![http://img.photobucket.com/albums/v329/viper10470/QTEC40F150.jpg](http://img.photobucket.com/albums/v329/viper10470/QTEC40F150.jpg) 2.5" Stainless flex joint. New, never used. $20 ![http://img.photobucket.com/albums/v329/viper10470/IMG00059-20110201-1859.jpg](http://img.photobucket.com/albums/v329/viper10470/IMG00059-20110201-1859.jpg) Magnafuel 2 port boost referenced fuel pressure regulator. -10AN inlet, dual -8AN outlets. Used for one season, and there is nothing wrong with it. Just changing the setup. $75 ![http://img.photobucket.com/albums/v329/viper10470/IMG00005-20101129-1917.jpg](http://img.photobucket.com/albums/v329/viper10470/IMG00005-20101129-1917.jpg) Mustang AC Delete pulley. Summit P/N ASP-025030 Cost $68 new, sell for $40 ![http://img.photobucket.com/albums/v329/viper10470/ASP-025030-45.jpg](http://img.photobucket.com/albums/v329/viper10470/ASP-025030-45.jpg) NEW Moroso wheel studs Summit P/N 46180. $10 ![http://img.photobucket.com/albums/v329/viper10470/46180-10.jpg](http://img.photobucket.com/albums/v329/viper10470/46180-10.jpg) MSD Blaster 3 Coil, used for 1 summer. Summit P/N 8223 $20 ![http://img.photobucket.com/albums/v329/viper10470/8223-25.jpg](http://img.photobucket.com/albums/v329/viper10470/8223-25.jpg) NEW Bosch 1821d 5" Grinder. Have no use for a 2nd one. $70 ![http://img.photobucket.com/albums/v329/viper10470/1821d-60.jpg](http://img.photobucket.com/albums/v329/viper10470/1821d-60.jpg) ---
**Author:** ![jsac442](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsac442/32/5176_2.png) [@jsac442](https://forums.speedlife.net/u/jsac442)\ **Post date:** [February 1, 2011, 11:22pm UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/2 "2011-02-01T23:22:22Z")
wheel studs for a mustang? ---
**Author:** ![FourEyed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foureyed/32/7216_2.png) [@FourEyed](https://forums.speedlife.net/u/FourEyed)\ **Post date:** [February 2, 2011, 5:13am UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/3 "2011-02-02T05:13:44Z")
Same thread size, but you will have to measure the knurl size needed on your current rotors. I didn’t measure this, and they did not fit. I didn’t have stock rotors though. ---
**Author:** ![Deathproof](https://avatars.discourse-cdn.com/v4/letter/d/dec6dc/32.png) [@Deathproof](https://forums.speedlife.net/u/Deathproof)\ **Post date:** [February 2, 2011, 9:47am UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/4 "2011-02-02T09:47:15Z")
> [@jsac442](#): > > wheel studs for a mustang? Not like a bimmer, you would install these through the back of your hub. Never broke a wheel stud huh? ---
**Author:** ![NYstanger](https://avatars.discourse-cdn.com/v4/letter/n/6a8cbe/32.png) [@NYstanger](https://forums.speedlife.net/u/NYstanger)\ **Post date:** [February 2, 2011, 9:52am UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/5 "2011-02-02T09:52:11Z")
> [@Deathproof](#): > > Not like a bimmer, you would install these through the back of your hub. Never broke a wheel stud huh? I think he was asking if they are for a mustang not questioning wheel studs on a mustang. ---
**Author:** ![FourEyed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foureyed/32/7216_2.png) [@FourEyed](https://forums.speedlife.net/u/FourEyed)\ **Post date:** [February 8, 2011, 6:00am UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/6 "2011-02-08T06:00:34Z")
More parts FS… Just changing my setup around a bit. Custom Turbo grind Hyd. Roller cam, Spec’d by Derrick at BB&T. PM for specs if interested -$150- SOLD Ford Hyd. roller lifters. SOLD Trick Flow push rods $50 SCAT 4340 H beam rods 5.400" SOLD Prof. Products 28oz Balancer -SOLD ---
**Author:** ![FourEyed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foureyed/32/7216_2.png) [@FourEyed](https://forums.speedlife.net/u/FourEyed)\ **Post date:** [February 18, 2011, 8:45am UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/7 "2011-02-18T08:45:09Z")
TTT. some stuff sold. ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [February 18, 2011, 7:14pm UTC](https://forums.speedlife.net/t/misc-parts-tools/208776/8 "2011-02-18T19:14:33Z")
i’ll pick up the bosch tomorrow for 50?