# Mods please lock!!!!!!!!
**URL:** https://forums.speedlife.net/t/mods-please-lock/97487
**Category:** Classifieds
**Created:** [June 29, 2006, 1:28pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487 "2006-06-29T13:28:07Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 29, 2006, 1:28pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487/1 "2006-06-29T13:28:07Z")
like the title says i need the sleeve( dont know what its called) that slides over the shaft that sticks out of the tranny :? its all one plate i dont know if its the same as the ka but thats all i need.
the pc. im talking about guides the release bearing i beleive.
[ ](http://www.mysportscar.com/andy/FA/196.jpg)
this is it here^^^
---
### Author:  [@snowboard\_240sx](https://forums.speedlife.net/u/snowboard_240sx)
#### Post date: [June 29, 2006, 7:46pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487/2 "2006-06-29T19:46:26Z")
you can also use a KA tranny with the sr
---
### Author:  [@KoukiS14](https://forums.speedlife.net/u/KoukiS14)
#### Post date: [June 29, 2006, 8:20pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487/3 "2006-06-29T20:20:04Z")
MSSC should have one for you. Call or email them. Their info is on this site, look for spilners sig.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 30, 2006, 12:46am UTC](https://forums.speedlife.net/t/mods-please-lock/97487/4 "2006-06-30T00:46:16Z")
> [@snowboard\_240sx](#):
>
> you can also use a KA tranny with the sr
really???.. :shock: thanks man
---
### Author:  [@MRWmotorsports](https://forums.speedlife.net/u/MRWmotorsports)
#### Post date: [June 30, 2006, 7:47am UTC](https://forums.speedlife.net/t/mods-please-lock/97487/5 "2006-06-30T07:47:49Z")
> [@bajansr](#):
>
> [quote=snowboard\_240sx]you can also use a KA tranny with the sr
really???.. :shock: thanks man[/quote]
Well sort of … You have to change the bell housing from the SR onto the KA trans, and teh bell housing is also teh front end of teh gear caseing, so it’s not a simple straight swap, you need to do some disasembly/re-assembly.
-Martin.
---
### Author:  [@Eggman](https://forums.speedlife.net/u/Eggman)
#### Post date: [July 2, 2006, 8:16pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487/6 "2006-07-02T20:16:52Z")
I am using a KA tranny on my SR right now. You probably want to replace the paper gasket thing between the bell housing and the tranny.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [July 2, 2006, 10:51pm UTC](https://forums.speedlife.net/t/mods-please-lock/97487/7 "2006-07-02T22:51:49Z")
lol thanks man … did u learn that the hard way … or something^^^^
---
### Author:  [@Eggman](https://forums.speedlife.net/u/Eggman)
#### Post date: [July 3, 2006, 6:27am UTC](https://forums.speedlife.net/t/mods-please-lock/97487/8 "2006-07-03T06:27:27Z")
I didn’t learn it the hard way, because I had a very good mechnic that helped me out. I used those paper gasket thing (They come in a roll) you buy from Canadian tire, then traced the shape after I take out the bell housing, then cut it.