# moldeding fiberglass together?

**URL:** https://forums.speedlife.net/t/moldeding-fiberglass-together/183794
**Category:** PittSpeed Automotive
**Created:** [July 26, 2006, 8:16am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794 "2006-07-26T08:16:45Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![scott5](https://avatars.discourse-cdn.com/v4/letter/s/e480ec/32.png) [@scott5](https://forums.speedlife.net/u/scott5)
#### Post date: [July 26, 2006, 8:16am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/1 "2006-07-26T08:16:45Z")

</div>

I figure since noone wants to buy my corvette, that i might as well fix it up and drive it for now. here is my dilemma i have two hoods both with damage on them, one less than the other. I was just wondering if anyone knows anyone who could fiberglass the good parts from the one hood and mold them to the other hood to make one good one. Anyone knwo anyone to do this and how much you think it would cost?

---

<div class="post-metadata">

### Author: ![F-B-A](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/f-b-a/32/6022_2.png) [@F-B-A](https://forums.speedlife.net/u/F-B-A)
#### Post date: [July 26, 2006, 8:26am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/2 "2006-07-26T08:26:51Z")

</div>

A LOT,IMO. flat panels such as hoods are difficult to work on, and best way is to take it from a mold.

I do quit a bit of fiberglass, and to be honest, i wouldnt even consider it for under 500

---

<div class="post-metadata">

### Author: ![slowcamaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowcamaro/32/5975_2.png) [@slowcamaro](https://forums.speedlife.net/u/slowcamaro)
#### Post date: [July 26, 2006, 8:31am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/3 "2006-07-26T08:31:28Z")

</div>

best bet is buy a new hood…thats a lo of work

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [July 26, 2006, 8:32am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/4 "2006-07-26T08:32:00Z")

</div>

call jeff at VOLKERS IN young woood

---

<div class="post-metadata">

### Author: ![scott5](https://avatars.discourse-cdn.com/v4/letter/s/e480ec/32.png) [@scott5](https://forums.speedlife.net/u/scott5)
#### Post date: [July 26, 2006, 11:28am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/5 "2006-07-26T11:28:35Z")

</div>

whats his number?

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [July 26, 2006, 11:29am UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/6 "2006-07-26T11:29:32Z")

</div>

phone book

---

<div class="post-metadata">

### Author: ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [July 26, 2006, 12:09pm UTC](https://forums.speedlife.net/t/moldeding-fiberglass-together/183794/7 "2006-07-26T12:09:45Z")

</div>

> [@scott5](#):
>
> whats his number?

Yes, call Jeff.724-696-5309.