# molding reinstallation?

**URL:** <https://forums.speedlife.net/t/molding-reinstallation/94716>\
**Category:** SON240sx Automotive\
**Created:** [April 8, 2006, 6:36pm UTC](https://forums.speedlife.net/t/molding-reinstallation/94716 "2006-04-08T18:36:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![240SR](https://avatars.discourse-cdn.com/v4/letter/2/c0e974/32.png) [@240SR](https://forums.speedlife.net/u/240SR)\
**Post date:** [April 8, 2006, 6:36pm UTC](https://forums.speedlife.net/t/molding-reinstallation/94716/1 "2006-04-08T18:36:22Z")

</div>

I want to remove the moldings around the rear windows  
to paint my car, (S13).  
But I don’t no what to use to put them back on,what does the factory use to stick them there?If anyone has done this what did you use?Any suggestions will help.  
Thanks.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [April 8, 2006, 7:24pm UTC](https://forums.speedlife.net/t/molding-reinstallation/94716/2 "2006-04-08T19:24:29Z")

</div>

If you remove the molding the window basicly has to come out. I belive they are connected to the window.

---

<div class="post-metadata">

**Author:** ![240SR](https://avatars.discourse-cdn.com/v4/letter/2/c0e974/32.png) [@240SR](https://forums.speedlife.net/u/240SR)\
**Post date:** [April 9, 2006, 1:29pm UTC](https://forums.speedlife.net/t/molding-reinstallation/94716/3 "2006-04-09T13:29:25Z")

</div>

I thought they were attached to the window,but theres a spot were it came of a bit,and the back side is smooth and don’t see how they would clip in.But there is no old epoxy/calking under it so maybe they do clip in,I guess I’ll just have to pull it of and find out.  
Thanks for the help.